Quality Technician 1

Sonoco (NYSE: SON) adds $300M delayed draw term loan. Filing Impact Filing Sentiment Rhea-AI filing summary. Sonoco Products Company entered into a new unsecured credit agreement providing a delayed draw term loan facility of up to $300 million. The company can draw on this facility, subject to conditions, on or before September 13, 2026, with all borrowings due on the second anniversary of the funding date. Borrowings will bear interest at either a Term SOFR-based rate or a base rate, plus a margin tied to Sonoco's credit ratings, ranging from 0.850% to 1.100% for Term SOFR loans and from 0.000% to 0.100% for base rate loans. There is no required amortization, and voluntary prepayments are allowed without penalty, subject to notice and minimum size conditions. The agreement includes financial covenants requiring minimum Book Net Worth of at least 80% of the level as of March 31, 2024, subject to adjustments, and a minimum Consolidated Interest Coverage Ratio of 3.25 to 1.00. It also contains customary events of default, including nonpayment, covenant breaches, certain cross-defaults, bankruptcy events, and change of control. 03/23/2026 - 04:16 PM Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions: Securities registered pursuant to Section 12(b) of the Act: Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (§230.405 of this chapter) or Rule 12b-2 of the Securities Exchange Act of 1934 (§240.12b-2 of this chapter). Emerging growth company If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. On March 23, 2026, Sonoco Products Company (the "Company") entered into a credit agreement with the lenders party thereto and Wells Fargo Bank, National Association, as Administrative Agent (the "Term Credit Agreement"). The Term Credit Agreement provides the Company with a delayed draw term loan facility in an aggregate principal amount of up to $300 million on an unsecured basis (the "Term Loan Facility"). The Term Loan Facility may be drawn, subject to the satisfaction of certain conditions, on or prior to September 13, 2026. Borrowings under the Term Loan Facility, net of any prepayments, will become payable in full on the second anniversary of the Funding Date (as defined in the Term Credit Agreement). Borrowings under the Term Loan Facility will bear interest at a fluctuating rate per annum equal to, at the Company's option, (i) the forward-looking Secured Overnight Financing Rate term rate (such borrowings, "Term SOFR Loans"), (ii) a base rate (such borrowings, "Base Rate Loans"), or (iii) a combination thereof, plus, in each case, an applicable margin calculated based on the Company's credit ratings, ranging from 0.850% to 1.100% per annum for Term SOFR Loans and from 0.000% to 0.100% per annum for Base Rate Loans. There is no required amortization, and voluntary prepayments of borrowings under the Term Loan Facility are permissible without penalty, subject to certain conditions pertaining to minimum notice and minimum prepayment and reduction amounts as described in the Term Credit Agreement. The Term Credit Agreement contains various customary representations and warranties and affirmative and negative covenants, including financial covenants requiring the Company to maintain (i) a minimum Book Net Worth (as defined in the Term Credit Agreement) of not less than 80% of Book Net Worth as of March 31, 2024, subject to certain adjustments, and (ii) a minimum Consolidated Interest Coverage Ratio (as defined in the Term Credit Agreement) of not less than 3.25 to 1.00, in each case as more fully described in the Term Credit Agreement. The Term Credit Agreement also contains various customary events of default (subject to grace periods, as applicable) including, among others: nonpayment of principal, interest or fees; breach of covenant; failure to make any payment when due (whether by scheduled maturity, acceleration or otherwise) in respect of certain other material indebtedness; inaccuracy of the representations or warranties in any material respect; bankruptcy or insolvency; inability to pay debts; certain unsatisfied judgments; certain ERISA-related events; the invalidity or unenforceability of the Term Credit Agreement or certain other documents executed in connection therewith; and the occurrence of a change of control. The foregoing description of the Term Credit Agreement and the Term Loan Facility does not purport to be complete and is qualified in its entirety by reference to the full and complete terms of the Term Credit Agreement, which is filed as Exhibit 10.1 hereto and incorporated herein by reference. Certain of the lenders under the Term Loan Facility and/or their affiliates have in the past performed, and may in the future from time to time perform, investment banking, financial advisory, lending and/or commercial banking services, or other services for the Company and/or its subsidiaries, for which they have received, and may in the future receive, customary compensation and expense reimbursement. The information in Item 1.01 is incorporated herein by reference. (d) Exhibits * Certain schedules and attachments have been omitted pursuant to Item 601(a)(5) of Regulation S-K. The Company agrees to provide, on a supplemental basis, a copy of any omitted schedules and attachments to the Securities and Exchange Commission or its staff upon request. Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized. Faq. What new credit facility did Sonoco Products Company (SON) secure? Sonoco obtained an unsecured delayed draw term loan facility of up to $300 million. The company may borrow under this facility, subject to conditions, and all outstanding amounts will be payable on the second anniversary of the date when the loan is first funded. When does Sonoco (SON) need to draw on the new $300 million term loan? Sonoco may draw on the term loan facility on or before September 13, 2026. After that date, any undrawn portion will no longer be available, making this a time-limited source of committed financing for the company's future needs. What are the interest rates on Sonoco's new term loan facility? Borrowings bear a floating rate based on either Term SOFR or a base rate, at Sonoco's option. An additional margin is tied to Sonoco's credit ratings, ranging from 0.850% to 1.100% for Term SOFR loans and 0.000% to 0.100% for base rate loans. What key financial covenants apply to Sonoco's new credit agreement? The agreement requires Sonoco to maintain minimum Book Net Worth of at least 80% of Book Net Worth as of March 31, 2024, subject to adjustments. It also mandates a minimum Consolidated Interest Coverage Ratio of 3.25 to 1.00, measured as defined in the agreement. Can Sonoco prepay the $300 million term loan without penalties? Yes. The company may make voluntary prepayments on the term loan facility without penalty. These prepayments must comply with conditions in the agreement, including minimum notice requirements and minimum amounts for both prepayments and any corresponding reductions of the facility. What events of default are included in Sonoco's new term credit agreement? The agreement lists customary events of default, such as nonpayment of principal, interest, or fees, covenant breaches, cross-defaults on other material debt, bankruptcy or insolvency events, certain judgments, ERISA-related events, unenforceability of loan documents, and the occurrence of a change of control. Filing Exhibits & attachments. 4 documents Agreements & contracts.

EVR Research purchased an additional 170,000 shares of Sonoco Products Company in the fourth quarter of 2025, worth approximately $7.04 million based on quarterly average pricing, according to a February 17, 2026 SEC filing. The investment firm's total stake reached 220,000 shares valued at $9.60 million, representing 5.18% of its reportable assets. Sonoco, a global packaging solutions company, operates through consumer and industrial packaging segments serving food, beverage, construction and chemical markets worldwide. The company reported 30% net sales growth to $1.8 billion last quarter, driven largely by acquisitions, and posted a $332.2 million quarterly profit. Sonoco shares traded at $53.34, up 12.5% over the past year, underperforming the S&P 500's 19% gain in the same period.

Sonoco Plastics invests in molding tech for films and tapes. 16 Mar 2026 Key takeaways. * Sonoco Plastics invests €850,000 to expand extrusion and injection molding capacity at its Troisdorf, Germany, facility. * The upgrade will increase production of 3-inch plastic winding cores, endwalls, and components used in film and tape applications. * The company says the investment will reduce lead times and meet rising demand for high-precision cores with tight dimensional tolerances. Extruded cores for films and tapes (Image credit: Sonoco Plastics). Sonoco Plastics will increase the capacity of its Troisdorf, Germany, facility with an €850,000 (US$971,575) investment in extrusion and injection molding technology. The financing will support the production of 3 inch (76 mm) plastic extruded winding cores, endwalls, and related components for film and tape applications. "Demand for high-precision 3 inch cores continues to grow, and this investment helps us respond with more capacity and faster turnaround," says Curtis Bares, global director of sales and marketing at Sonoco Plastics. "By reinvesting in production at Troisdorf, we're reducing lead times for customers while continuing to deliver the consistent quality and tight tolerances they depend on for reliable winding performance." Film and tape for demanding uses. Sonoco Plastics says its cores and endwalls are engineered to ensure the performance of films and tapes across demanding applications. For the film market, the company can produce injection-molded cores of up to 2,265 mm in length. This is said to improve tight dimensional tolerances and to provide precise core geometries in terms of roundness and straightness. It also uses injection molding for endwalls and plugs to support performance in film converting and winding operations. Also for films, Sonoco Plastics provides extruded cores "in nearly all lengths" with secondary knurling technologies available for surface finishes. Cores are offered in acrylonitrile butadiene styrene (ABS), ABS/styrene acrylonitrile, PS, high impact PS, PE, and PP, with sizes including 3 inch (76 mm) and 6 inch (152 mm). Targeting the production of narrow-width wound materials such as tapes, Sonoco offers precise injection-molded and extruded winding cores. It says they are designed to meet surface flatness requirements. "Cores are available in a range of dimensions and materials, including PE, PP, PS, and ABS, enabling mechanical characteristics from rigid to high-impact." Last year, Sonoco consolidated its metal packaging and rigid paper containers businesses under one structure and sold its ThermoSafe business unit, which specializes in temperature assurance technology, to Arsenal Capital Partners for US$725 million.