Full-Time

Finishing Operator Assistant

Shaw Industries Group

Shaw Industries Group

No salary listed

Calhoun, GA, USA

In Person

On-site Shaw plant 4, 2225 S Hamilton Street Extension, Dalton, GA; 8-hour PM shift 3pm-11pm, Monday-Friday.

Category
Operations & Logistics (1)
Required Skills
Blender
Responsibilities
  • Ensure carpet is feeding correctly into precoat direct applicator and Tillotson adhesive applicator, and report folded carpet to Coater Operator and Sew-on Operator.
  • Identify style to be run using Sew-In Tracker screen.
  • Reference spec sheet to identify correct application settings for the given style (application, cupweight, puddle height, gap).
  • Enter correct settings into Latex Control System.
  • Manually check gap with gauges and adjust system if necessary.
  • Visually inspect latex application and troubleshoot using Latex Control System; notify supervisors of issues.
  • Make sure end dams are set up correctly and latex is not getting on carpet selvage; adjust end dams as necessary.
  • Perform all previous steps again for each style change.
  • Manually check cupweight and viscosity four times per shift and log in notebook; also do this for any backing or weight check requested by supervisor.
  • Ensure proper operation of pre-coat pumps and blenders.
  • Make sure soap, water, latex tank levels are sufficiently high.
  • Clean out precoat filter baskets twice per week.
  • Report any issues to supervisor.
  • The assistant operator must relieve the coater operator for breaks and absenteeism; the assistant operator will be held responsible for all duties of the coater operator during this time.
  • The assistant operator must relieve the froth operator for breaks and slack time (when froth operator is changing out secondary backing); the assistant operator will be held responsible for all duties of the froth operator during this time.
  • Conduct check at direction of supervisor.
  • Place 3 two-part paper forms on secondary (after application) as secondary rises to the marriage roller.
  • Place 3 2-part paper forms on alley side
  • Place 3 2-part paper forms on Center
  • Place 3 2-part paper forms on Wall side
Shaw Industries Group

Shaw Industries Group

View

Company Size

N/A

Company Stage

N/A

Total Funding

N/A

Headquarters

N/A

Founded

N/A