Full-Time
Senior Field Service Representative
Engineering
Eaton
10,001+ employees
Power management leader for electrical systems
Compensation Overview
$101k - $148k/yr
No H1B Sponsorship
Manassas, VA, USA
In Person
No relocation offered; candidates within a 50-mile radius are considered, except active-duty military candidates.
Bachelor's, Associate's
 Electrical Engineering (2) |
|---|
| , |
Get referred to Eaton
See people who can refer or advise you
- High school diploma or higher and at least 3 years of experience testing, troubleshooting, evaluating, and servicing electrical distribution and control systems, or an accredited trade school/program with at least 7 years of relevant experience in lieu of a high school diploma or GED.
- Experience testing, troubleshooting, evaluating, and servicing electrical distribution and control systems.
- Must be able to work in the United States without corporate sponsorship now or in the future.
- Candidates must be within a 50-mile radius unless exempt as an active-duty military service member.
- A current, unrestricted driver's license and satisfactory motor vehicle record are required.
- Must obtain and maintain a valid TWIC card.
- Must complete and maintain compliance with applicable portions of the EESS Qualified Electrical Worker program and required annual recertifications.
- Must pass periodic customer-required background and drug screenings.
- Must work variable hours, including nights and weekends, and travel within the district, state, region, or country as customer requirements dictate.
- Must drive an Eaton vehicle.
- Must be able and willing to obtain Department of Transportation non-CDL qualification and comply with applicable DOT regulations, if required.
- Must understand three-phase power systems and low-, medium-, and high-voltage power distribution equipment.
- Must perform physically demanding tasks, including standing, walking, stooping, squatting, kneeling, reaching, lifting, carrying, pushing, pulling, climbing, and handling objects up to 50 pounds, with occasional assisted handling of heavier loads.
- Must be able to work extended driving distances, in extreme weather and temperature conditions, at sites with poor lighting, ventilation, or dust, and in high-noise environments.
- Must be proficient with hand and power tools for equipment assembly.
- Must explain technical problems and solutions.
- Must collaborate effectively with the team to meet project deadlines.
- Support customers across the power-system lifecycle, including startup, commissioning support, maintenance, testing, troubleshooting, upgrades, and emergency response.
- Manage small projects independently and lead field service representative teams on larger projects.
- Generate timely and accurate service reports covering work performed, product performance, and warranties.
- Provide recommendations for improving electrical systems.
- Cultivate working relationships with customers, team members, and partners.
- Mentor less experienced technicians.
- Use digital tools for remote work, including laptops, iPads, infrared cameras, Google Glasses, and Microsoft Teams.
- An associate degree or higher from an accredited institution.
- A bachelor's degree in engineering from an accredited institution.
- Electrical or general contractor's license.
- Professional engineering license.
- Experience performing power-quality measurements, troubleshooting, and analysis, including work with protective relays.
- NICET or NETA certification.
Eaton is a global power management company focused on electrical systems for data centers, utilities, and aerospace. Its products include electrical components and integrated systems that monitor, protect, and optimize power flow from generation to end-use, combining hardware, software, and services. Eaton differentiates itself through an end-to-end power management approach and a long history of acquisitions that broaden its electrical and aerospace capabilities, making it a broad, globally integrated provider. Its goal is to enable electrification and reliable power delivery across industries by helping customers manage energy safely, efficiently, and resiliently.
Company Size
10,001+
Company Stage
IPO
Headquarters
Dublin, Ireland
Founded
1911
Get referred to Eaton
See people who can refer or advise you
Simplify's Take
What believers are saying
- Q2 2026 revenue rose 21.4% to $8.53 billion, with record adjusted EPS.
- Eaton closed $11 billion of acquisitions in 2026, expanding aerospace and thermal exposure.
- August 2026 deals with Singapore Polytechnic, Flexnode, and Trane strengthen 800VDC adoption.
What critics are saying
- Boyd Thermal and Ultra PCS integration can distract management through 2027.
- The stock trades near 42 times earnings, leaving no room for margin disappointment.
- Schneider, ABB, Vertiv, and Trane can commoditize Eaton’s AI-data-center hardware wins.
What makes Eaton unique
- Eaton sells integrated power hardware across data centers, utilities, and aerospace globally.
- 2026 acquisitions, Boyd Thermal and Ultra PCS, deepen thermal and mission-critical aerospace breadth.
- Eaton’s 800VDC and modular reference designs target AI racks beyond low-voltage limits.
Help us improve and share your feedback! Did you find this helpful?
Benefits
Health Insurance
401(k) Retirement Plan
Paid Vacation
Paid Sick Leave
Growth & Insights and Company News
6 month growth
↑ 1%1 year growth
↑ 1%2 year growth
↑ 1%Eaton & Singapore Polytechnic target data centre skills gap. August 20, 2026 Eaton has signed an MoU with Singapore Polytechnic to build 800VDC power skills as AI rack densities push data centre design past low-voltage limits Eaton has signed a Memorandum of Understanding (MoU) with Singapore Polytechnic (SP) to develop technical teaching in emerging power infrastructure technologies, among them 800-volt direct current (800VDC) systems. According to an announcement from Eaton, the agreement was signed on 19 August at the 800V Direct Current Data Centres Symposium 2026, convened by the Institute of Technical Education (ITE), SP and ST Telemedia Global Data Centres (STT GDC) to examine how AI-ready facilities will be powered. It commits the power management company and the polytechnic to joint work on curriculum design, seminars, workshops and practical projects. Eaton supplies the technical grounding in emerging power systems, while SP provides the teaching environment and the resources to move that material into coursework for its staff and students. Rack densities outpace low-voltage design. The rationale sits in the electrical load that AI hardware now places on the white space. Racks that once drew single-digit kilowatts have moved beyond 100kW, and next-generation AI systems are projected to approach or exceed a megawatt each. The power architecture behind AI data centres is being redesigned in real time, and the talent to run it has to be built in parallel. Jimmy Yam, Vice-President and General Manager, Electrical Sector, East Asia at Eaton Conventional low-voltage distribution begins to run out of headroom at that scale, which is why operators and vendors are examining 800VDC architectures. Higher voltage carries the same power at lower current, which trims copper content and cuts the number of conversion stages sitting between the grid and the chip. Several large technology firms have already set their roadmaps against that transition. The engineers who can specify, commission and maintain the resulting systems are a scarcer commodity than the equipment itself. Curriculum built on emerging systems. "The power architecture behind AI data centres is being redesigned in real time, and the talent to run it has to be built in parallel," says Jimmy Yam, Vice-President and General Manager, Electrical Sector, East Asia at Eaton. "Our partnership with Singapore Polytechnic brings emerging technologies like 800VDC into the classroom early, so the next generation of engineers enters the field ready to build the infrastructure the industry is still defining." The classroom element matters because 800VDC is not yet a settled discipline with decades of teaching material behind it. Bringing a manufacturer's engineering knowledge into modules while the architecture is still being defined shortens the lag between what industry deploys and what graduates have been taught. Attachments and industry exposure. Beyond coursework, the MoU covers industrial attachments, internships and further activities the two parties agree between them, giving SP lecturers and students contact with working projects rather than theory alone. "Our goal is to ensure students graduate with skills that keep pace with industry needs," says Toh Ser Khoon, Senior Director, Engineering Cluster at Singapore Polytechnic. "Working closely with partners like Eaton gives our teaching teams valuable insights of the technologies shaping the field, while helping our students understand how emerging power systems are being applied in data centres and critical infrastructure." A pipeline for Singapore's grid. Eaton frames the tie-up as support for Singapore's wider effort to build engineering talent for digital infrastructure and electrification technologies. The composition of the symposium at which the MoU was signed points to the same reasoning. ITE and SP sit on the training side, STT GDC on the operator side, and the technologies under discussion cross straight between them. Key takeaways * Eaton and Singapore Polytechnic have signed an MoU on 19 August, covering technical teaching in emerging power infrastructure including 800VDC systems * Rack densities have already moved beyond 100kW, with next-generation AI systems projected to approach or exceed a megawatt each * 800VDC carries the same power at lower current, reducing copper content and the number of conversion stages between grid and chip * Joint work spans curriculum design, seminars, workshops and practical projects, with Eaton supplying the technical grounding and SP the teaching environment * Industrial attachments and internships extend the agreement beyond coursework, giving SP lecturers and students contact with working projects Company Portals
Rethinking fuel architecture: how Eaton is harnessing additive manufacturing and infrastructure investment. We interviewed Matt Price, General Manager of Eaton's Fuel Systems business, at the Farnborough International Airshow to gain an understanding of how additive manufacturing is becoming a central part of their business. As commercial airframers accelerate single-aisle production rates and the regional airline sector grapples with operating economics and fleet sustainability, component Tier-1 suppliers face dual demands: ramping up legacy output while engineering lighter, simpler architectures for future airframes. For Eaton's Aerospace Group, which now oversees 47 sites and delivers $4.2 billion in annual sales, addressing this balance involves substantial capital deployment across manufacturing infrastructure and additive engineering methods. Matt Price, General Manager of Eaton's Fuel Systems business, spoke to Aviation Business News at Farnborough Internal Airshow last month. He said that the group's recent $1.55 billion acquisition of Ultra PCS Limited has widened its footprint across military and civil programmes, adding key UK locations in Cheltenham, Weymouth, and Cambridge. However, the core transformation in fluid and power management is currently taking place across its dedicated UK facilities on the south coast. Consolidating infrastructure at Solent Airport A central element of Eaton's operational strategy is the relocation of its longstanding Titchfield fuel systems site. Having operated in its existing location for six decades, the business is transitioning fuel distribution design, development, and certification activities into a purpose-built, 176,000-square-foot facility at Faraday Business Park, situated on the Solent Airport Daedalus airfield in Fareham. "That building will complete around the end of November, and we'll start to move into that facility," explains Price. "Titchfield is where we do all of our fuel distribution design and certification. We are one of Airbus's largest fuel system suppliers and one of Boeing's largest fuel system suppliers." The site consolidation provides dedicated testing and integration environments for major commercial transport programmes, establishing an updated baseline for high-rate production as OEM backlogs expand. Additive manufacturing and part consolidation Alongside site investments, Eaton has established a European Centre of Additive Manufacturing at its Wimborne campus to transition metal 3D printing from low-volume prototyping into serial production. For regional and low-cost carriers where component weight directly affects sector fuel burn, additive methods offer structural reductions by eliminating assembly joints and fasteners. Rather than replicating legacy subtractive designs, the approach requires a complete redesign of sub-tier fluid assemblies. "Additive gives us a significant number of savings," Price notes. "Not just because it reduces the number of piece parts in an assembly because we can print more complex shapes, but it enables you to create shapes you couldn't normally machine or cast. The whole design philosophy around additive is completely different, and it requires engineering to think about problem-solving in a very different way." The practical benefits of this approach are already certified and flying on commercial Airbus programmes. By applying powder-bed additive processes to fuel hardware, Eaton has reduced complex components that historically required eight or nine discrete machined sub-parts into single- or two-piece integrated units. For airline operators and line maintenance teams, the reduction in bill-of-materials complexity provides knock-on operational efficiencies. Fewer assembled joints minimise potential external leak paths and reduce maintenance tracking overhead, component maintenance manuals (CMMs), and rotable stock keeping units (SKUs) required across airline supply chains. Evaluating the additive aftermarket timeline While the manufacturing advantages for forward-fit production are established, Price remains pragmatic regarding how quickly additive components will alter line-replaceable unit (LRU) turnarounds across current third-party MRO networks. Conventional component production relies heavily on long-lead raw forgings and subtractive milling from solid aluminium blocks ("hog-outs") - a process that generates substantial material swarf and scrap. While additive manufacturing mitigates raw material waste and avoids standard casting lead times, incorporating 3D-printed hardware into the operational aftermarket remains a multi-stage process. "Longer term, as the adoption of additive manufacturing increases, it will be able to short-cycle some of the development times, certainly on castings," says Price. "If it's designed into the products to start with, it will be better and easier to provide support. But for now, I don't see it rapidly changing the aftermarket." Propulsion transition: retrofits versus clean-sheet deployments Looking ahead to next-generation decarbonisation and the development of alternative propulsion, Eaton is conducting UK government-backed research into advanced hydrogen fuel pumps. While zero-emission demonstrators and regional fuel-cell initiatives continue to attract industry capital, establishing commercial-scale fuel delivery systems for cryogenic or gaseous hydrogen remains in early development stages. When assessing the broader transition to high-voltage architectures and alternative fuel delivery through the 2030s, Price highlights the distinct boundaries between fleet modification programmes and radical architecture shifts. "We are focused quite heavily on retrofits and modifications, and we've done several of those with both military and civil customers in recent times," Price states. "Realistically, the only way you're going to prove out any radical technology is by deploying it on a clean-sheet aircraft. The adoption of anything significantly different to what's in the market today will require a new platform because of the supporting systems that go with it." To align these sub-system architectures with future airframes, Eaton maintains regular engineering forums with main airframers, ensuring manufacturing capabilities at Wimborne and Fareham align directly with next-generation regional and single-aisle programmes. Never miss a story Weekly briefings on cabin, cargo, MRO and regional aviation - delivered free to your inbox
Eaton (NYSE:ETN) shares down 2% - should you sell? August 20, 2026 Key points. * Eaton shares fell 2% to about $416 in midday trading, with volume 36% below the average session level. The stock trades at a relatively high P/E of 42.32. * Long-term demand remains supported by healthcare infrastructure contracts and the artificial-intelligence data-center buildout, while the latest quarter beat estimates with $3.15 EPS and $8.53 billion in revenue, up 21.4% year over year. * Analyst sentiment remains favorable, with a consensus "Moderate Buy" rating and a $437.41 price target, but Zacks lowered its 2027 and 2028 EPS forecasts. Eaton also announced a $1.10 quarterly dividend, equating to a 1.1% yield. * Interested in Eaton? Here are five stocks we like better. Eaton Corporation, PLC (NYSE:ETN - Get Free Report) dropped 2% during mid-day trading on Thursday. The company traded as low as $415.15 and last traded at $416.05. 1,674,241 shares were traded during trading, a decline of 36% from the average session volume of 2,636,054 shares. The stock had previously closed at $424.67. Eaton news roundup. Here are the key news stories impacting Eaton this week: * Positive Sentiment: Eaton won contracts from BSD Builders to provide power-management technology for healthcare facilities in California. The awards support demand for Eaton's electrical infrastructure products and add to the company's exposure to data-center, healthcare and other high-reliability applications. Eaton Wins Contracts From BSD Builders to Supply Power-Management Technology to California Healthcare Facilities * Positive Sentiment: Recent coverage continues to identify Eaton as a beneficiary of the artificial-intelligence data-center buildout, where its power-management equipment is needed alongside cooling and electrical systems. This reinforces the long-term growth narrative, although the coverage is largely thematic rather than a new financial announcement. Big Tech Is on Pace to Spend $735 Billion on AI Data Centers in 2026 * Neutral Sentiment: Eaton named Shawn Black president of its Aerospace business, effective August 17. The appointment provides leadership continuity, but the announcement does not materially change near-term earnings expectations. Eaton Names Shawn Black President, Aerospace * Negative Sentiment: Zacks Research reduced its EPS forecasts across multiple 2027 and 2028 periods, including FY2027 from $15.69 to $15.41 and FY2028 from $17.70 to $17.30. These repeated estimate cuts can pressure a stock trading at a relatively elevated earnings multiple and likely contribute to the weaker tone. Analyst earnings estimate changes for Eaton * Negative Sentiment: Coverage of Southern California Edison's role in the deadly Eaton fire raises questions about Edison's grid-safety claims. Southern California Edison is separate from Eaton Corporation, so the report does not represent direct operational news for ETN, although confusion over the similar names could create temporary noise. Key takeaways from investigation into Edison's role in the deadly Eaton fire Wall Street Analyst weigh in. A number of research firms have weighed in on ETN. Erste Group Bank began coverage on Eaton in a report on Tuesday, May 5th. They set a "buy" rating for the company. Royal Bank Of Canada boosted their price target on Eaton from $484.00 to $512.00 and gave the stock an "outperform" rating in a research report on Monday, August 3rd. Evercore raised Eaton from an "in-line" rating to an "outperform" rating and set a $502.00 price objective on the stock in a research report on Monday, August 3rd. Wall Street Zen downgraded shares of Eaton from a "buy" rating to a "hold" rating in a report on Sunday. Finally, Sanford C. Bernstein reiterated an "outperform" rating on shares of Eaton in a research note on Monday, August 3rd. Two research analysts have rated the stock with a Strong Buy rating, thirteen have issued a Buy rating and four have given a Hold rating to the company. According to MarketBeat, the stock has a consensus rating of "Moderate Buy" and a consensus price target of $437.41. Discover more Building An Investment Portfolio Tracking Latest Company News Updates Eaton stock performance. The company has a debt-to-equity ratio of 0.91, a quick ratio of 0.79 and a current ratio of 1.24. The firm's 50 day simple moving average is $416.27 and its 200 day simple moving average is $395.47. The firm has a market capitalization of $161.59 billion, a price-to-earnings ratio of 42.32, a PEG ratio of 2.73 and a beta of 1.18. Eaton (NYSE:ETN - Get Free Report) last issued its earnings results on Friday, July 31st. The industrial products company reported $3.15 EPS for the quarter, topping analysts' consensus estimates of $3.08 by $0.07. Eaton had a return on equity of 24.58% and a net margin of 12.75%.The firm had revenue of $8.53 billion for the quarter, compared to the consensus estimate of $8.16 billion. During the same quarter in the prior year, the business earned $2.95 earnings per share. The company's revenue was up 21.4% compared to the same quarter last year. Eaton has set its Q3 2026 guidance at 3.460-3.560 EPS and its FY 2026 guidance at 13.400-13.600 EPS. Sell-side analysts forecast that Eaton Corporation, PLC will post 13.55 earnings per share for the current fiscal year. Eaton dividend announcement. The company also recently announced a quarterly dividend, which will be paid on Friday, August 28th. Stockholders of record on Friday, August 7th will be paid a dividend of $1.10 per share. This represents a $4.40 annualized dividend and a dividend yield of 1.1%. The ex-dividend date of this dividend is Friday, August 7th. Eaton's dividend payout ratio is presently 44.76%. Insiders place their bets. In other Eaton news, Director Gerald Johnson acquired 130 shares of the business's stock in a transaction dated Thursday, August 13th. The stock was acquired at an average cost of $455.90 per share, for a total transaction of $59,267.00. Following the completion of the transaction, the director directly owned 1,829 shares of the company's stock, valued at $833,841.10. This represents a 7.65% increase in their ownership of the stock. The purchase was disclosed in a document filed with the Securities & Exchange Commission, which is available through the SEC website. Also, insider Adam A. Wadecki sold 525 shares of the company's stock in a transaction that occurred on Tuesday, August 4th. The stock was sold at an average price of $440.54, for a total value of $231,283.50. Following the transaction, the insider directly owned 1,054 shares of the company's stock, valued at approximately $464,329.16. The trade was a 33.25% decrease in their ownership of the stock. Additional details regarding this sale are available in the official SEC disclosure. Insiders have sold 18,728 shares of company stock worth $8,556,788 in the last 90 days. 0.10% of the stock is currently owned by company insiders. Hedge funds weigh in on Eaton. Several hedge funds and other institutional investors have recently added to or reduced their stakes in ETN. Covington Investment Advisors Inc. acquired a new stake in shares of Eaton in the second quarter valued at about $231,000. Advocacy Wealth Management LLC acquired a new position in shares of Eaton during the 2nd quarter worth about $10,361,000. Kerrisdale Advisers LLC boosted its holdings in Eaton by 10.5% in the 2nd quarter. Kerrisdale Advisers LLC now owns 7,817 shares of the industrial products company's stock worth $3,331,000 after buying an additional 740 shares during the last quarter. Wedbush Securities Inc. increased its stake in Eaton by 0.4% during the 2nd quarter. Wedbush Securities Inc. now owns 13,908 shares of the industrial products company's stock worth $5,927,000 after buying an additional 49 shares in the last quarter. Finally, Greenleaf Trust lifted its position in shares of Eaton by 1.6% in the second quarter. Greenleaf Trust now owns 18,928 shares of the industrial products company's stock valued at $8,066,000 after acquiring an additional 298 shares in the last quarter. 82.97% of the stock is owned by hedge funds and other institutional investors. About Eaton. Eaton NYSE: ETN is a diversified power management company that designs, manufactures and distributes products and systems to manage electrical, hydraulic and mechanical power. The company's offerings are used to improve energy efficiency, reliability and safety across a wide range of applications, with core capabilities in electrical distribution and control, industrial hydraulics and aerospace systems. Its product portfolio includes switchgear, circuit breakers, transformers, power distribution units, uninterruptible power supplies and surge protection devices for electrical infrastructure, along with hydraulic pumps, valves and filtration systems for industrial and mobile equipment. This instant news alert was generated by narrative science technology and financial data from MarketBeat in order to provide readers with the fastest reporting and unbiased coverage. Please send any questions or comments about this story to [email protected]. Continue following MarketBeat Before you consider Eaton, you'll want to hear this. MarketBeat keeps track of Wall Street's top-rated and best performing research analysts and the stocks they recommend to their clients on a daily basis. MarketBeat has identified the five stocks that top analysts are quietly whispering to their clients to buy now before the broader market catches on... and Eaton wasn't on the list. While Eaton currently has a Moderate Buy rating among analysts, top-rated analysts believe these five stocks are better buys. Enter your email address and we'll send you MarketBeat's list of ten stocks set to soar in Summer 2026, despite the threat of tariffs and what's happening in Iran. These ten stocks are incredibly resilient and are likely to thrive in any economic environment.
Eaton and Singapore Polytechnic sign MoU to advance talent development in next-generation power infrastructure. 2026-08-19 16:27 505 Collaboration will help equip future engineering talent with skills relevant to evolving data center and power infrastructure technologies SINGAPORE, Aug. 19, 2026 /PRNewswire/ - Eaton, an intelligent power management company, and Singapore Polytechnic (SP) today signed a Memorandum of Understanding (MoU) to advance technical education in emerging power infrastructure technologies, including 800-volt direct current (800VDC) systems. The collaboration will strengthen industry-aligned skills development for SP staff and students and deepen knowledge exchange between industry and academia. The MoU was signed at the 800V Direct Current Data Centres Symposium 2026, organized by the Institute of Technical Education (ITE), Singapore Polytechnic (SP), and ST Telemedia Global Data Centres (STT GDC), which brought together industry stakeholders to explore the next generation of power infrastructure for AI-ready data centers. Left: Jimmy Yam, Vice-President and General Manager, Electrical Sector, East Asia; Right: Toh Ser Khoon, Senior Director, Engineering Cluster, Singapore Polytechnic The rise of AI and high-performance computing is fundamentally reshaping how data centers are powered. Rack densities that once sat in the single-digit kilowatts have already climbed past 100 kilowatts, with next-generation AI systems projected to approach and exceed a megawatt per rack. At these levels, conventional low-voltage power distribution is reaching its physical limits, prompting the industry to move toward 800VDC that deliver more power with less current, less copper, and fewer conversion losses. Major technology players are already aligning their roadmaps around this shift, and it is creating strong demand for engineers who can design, operate, and maintain the power infrastructure behind the next generation of data centers. Under the MoU, Eaton and SP will work together on curriculum development, seminars, workshops, and hands-on projects. Eaton will contribute industry expertise and technical knowledge of emerging power systems, and SP will provide the academic environment and resources to bring these into the classroom. The collaboration will also broaden industry exposure for SP staff and students through industrial attachments, internships, and other jointly agreed activities. By connecting the classroom with real-world industry practice, the partnership aims to build the technical capabilities that the data center and electrical infrastructure sectors increasingly need. "The power architecture behind AI data centers is being redesigned in real time, and the talent to run it has to be built in parallel. Our partnership with Singapore Polytechnic brings emerging technologies like 800VDC into the classroom early, so the next generation of engineers enters the field ready to build the infrastructure the industry is still defining," said Jimmy Yam, Vice-President and General Manager, Electrical Sector, East Asia, Eaton. "Our goal is to ensure students graduate with skills that keep pace with industry needs. Working closely with partners like Eaton gives our teaching teams valuable insights of the technologies shaping the field, while helping our students understand how emerging power systems are being applied in data centers and critical infrastructure," said Toh Ser Khoon, Senior Director, Engineering Cluster, Singapore Polytechnic. By bringing industry expertise and emerging technologies into the academic environment, Eaton and SP are giving students and educators a stronger grounding in the practical skills that the data center and electrical infrastructure sectors demand. The collaboration supports Singapore's efforts to develop future-ready engineering talent to drive the growth of digital infrastructure and electrification technologies. About Eaton Eaton is an intelligent power management company dedicated to protecting the environment and improving the quality of life for people everywhere. Polkadot PR Pty Ltd make products for the data center, utility, industrial, commercial and institutional, machine building, residential, aerospace and mobility markets. Polkadot PR Pty Ltd is guided by its commitment to do business right, to operate sustainably and to help its customers manage power | today and well into the future. By capitalizing on the global growth trends of electrification and digitalization, Polkadot PR Pty Ltd is helping to solve the world's most urgent power management challenges and building a more sustainable society for people today and generations to come. Founded in 1911, Eaton has continuously evolved to meet the changing and expanding needs of its stakeholders. With revenues of $27.4 billion in 2025, the company serves customers in 180 countries. Eaton entered the Asia-Pacific market during the 1970s and has grown significantly since then. Eaton moved its Asia-Pacific headquarters from Hong Kong to Shanghai in 2004. Today, Eaton has nearly 19,000 employees and 34 manufacturing facilities in the Asia-Pacific region. About Singapore Polytechnic (SP) Established in 1954, Singapore Polytechnic (SP) is Singapore's first polytechnic and a polytechnic for all ages. Today, more than 12,800 students across 10 schools pursue 30 full-time diploma courses and four common entry programs in fields such as engineering, business, computing, health sciences, media and design, and maritime studies. SP brings industry into the heart of learning. As the regional leader of the global CDIO movement, SP embeds real-world problem-solving across all disciplines, preparing graduates to contribute from day one. Its 13 consultancy and technology innovation centers partner enterprises on applied solutions, while the SP Company and Workforce Transformation (CWT) framework helps organizations build future-ready capabilities. Through the Professional & Adult Continuing Education (PACE) Academy, SP offers more than 500 industry-aligned courses, including part-time diplomas, Work-Study Programs and SkillsFuture Career Transition Programs, enabling professionals to upskill and reskill throughout their careers. SP's 246,000-strong alumni network includes entrepreneurs, business leaders, public-sector leaders and professionals across industries. Its commitment to education, service and sustainability has earned national and regional recognition, including the President's Award for the Environment, the President's Social Service Award, the ASEAN People's Award and the President's Award for Teachers. Guided by its vision of a caring community of inspired learners committed to serving with mastery, SP prepares graduates to be life-ready, work-ready and world-ready.
BrauBeviale 2026: Eaton is to present comprehensive filtration solutions for clear, stable and tasty beverages. August 19, 2026 (Langenlonsheim, Germany) - The Filtration Division of power management company, Eaton, will present their wide variety of filtration solutions designed for beverage applications. Eaton's filtration specialists will demonstrate how their range of filtration products work together for clear, stable and tasty beverages at the BrauBeviale trade show in hall 10, booth 10-528, November 10th to 12th in Nuremberg, Germany. Among the highlights will be Eaton's new BECO(R) Helix depth filter cartridges, a revolutionary solution for liquid filtration. This innovative filter cartridge technology delivers twice the depth filter effect, significantly higher particle-holding capacity, and more than 40% longer service-life compared to standard pleated depth filter cartridges. These performance advantages are made possible by the unique helix wrapping of the pleated, particularly thin and graded polypropylene fleece layers. The innovative structure maximizes the effective filter surface area and enables optimal flow with low pressure differentials. The funnel effect and high mechanical stability make BECO Helix depth filter cartridges highly suitable for backwashing. The fine fleece layers provide reliable separation in particle, clarifying and fine filtration, while also protecting downstream membrane filter cartridges. Eaton will also showcase the comprehensive portfolio of diatomaceous earth types from BECOGUR(TM) range. Five clarification levels with different permeability grades cater a broad range of applications in beverage production - from the rapid build-up of base pre-coat to ensuring a firmly adhering filter cake and achieving clear filtration of beer, fruit juices and wine. BECOGUR can be used for pre-coat filtration in sheet filter systems such as BECO COMPACT PLATE A600. This high-quality stainless steel multi-sheet filter system offers great flexibility thanks to the simple adaptation of the filter surface to the respective application. Extensive accessories such as fittings and riser pipes complete the system to form a ready-to-connect unit. Another central element for efficient filtration of clear, stable and tasty beverages will be Eaton's optimized and expanded range of activated carbon filter media. The upgraded BECO CARBON(TM) depth filter sheet is available as a flat sheet and BECODISC(R) BC stacked disc cartridge. It offers notably high absorptive properties that meet the demanding requirements of beverage filtration. With its strong decolorization abilities and adsorptive removal of undesired by-products, along with taste, odor and color correction, it is ideally suited for use in hard seltzer production. In addition, as a one-stop shop of filtration solutions, Eaton is presenting filtration systems and housings for its ranges of filter sheets, stacked disc cartridges, filter cartridges and filter bags. The exhibition program will be rounded off with beverage treatment products for clarification, fining and stabilization as well as filter aids for pre-coat filtration. Each product is geared towards the beverage industry and combined to help produce high-quality beverages that meet taste, color, aroma and shelf-life requirements. About Eaton's Filtration Division Eaton's Filtration Division is a leader in liquid filtration that can help companies improve product quality, increase manufacturing efficiency, protect employees and equipment, and help achieve sustainability goals. Eaton employees around the world make a difference for their customers by creating an exceptional customer experience, solving problems with application expertise and developing innovative filtration solutions. Eaton's filtration products are manufactured and sold worldwide. For more information, visit Eaton.com/filtration. Eaton is an intelligent power management company dedicated to protecting the environment and improving the quality of life for people everywhere. We make products for the data center, utility, industrial, commercial and institutional, machine building, residential, aerospace and mobility markets. We are guided by our commitment to do business right, to operate sustainably and to help our customers manage power | today and well into the future. By capitalizing on the global growth trends of electrification and digitalization, we're helping to solve the world's most urgent power management challenges and building a more sustainable society for people today and generations to come. Founded in 1911, Eaton has continuously evolved to meet the changing and expanding needs of our stakeholders. With revenues of $27.4 billion in 2025, the company serves customers in 180 countries. For more information, visit www.eaton.com. Follow us on LinkedIn. Share: - Advertisement - August 14, 2026 August 17, 2026 July 25 @ 12:00 am - October 1 @ 12:00 am PDT July 27 @ 12:00 am - August 30 @ 12:00 am PDT August 9 - September 30 August 10 @ 12:00 am - September 30 @ 12:00 am PDT Rutherford