R&S and Pegatron test FR3 dual-stream MIMO at 13 & 15 GHz. Rohde & Schwarz and Pegatron demonstrate dual-polarized FR3 phased array MIMO at 13 and 15 GHz, achieving nearly double the data throughput of a single-stream setup. November 5, 2026 Rohde & Schwarz and Pegatron jointly showcased an FR3 technology demonstration at the 6G Summit in Taipei, Taiwan, highlighting phased array testing for next-generation wireless networks. The demonstration integrated Pegatron's dual-polarized FR3 phased array with Rohde & Schwarz's FSWX signal and spectrum analyzer and R&S SMW200A vector signal generator. The companies evaluated MIMO transmission at 13 GHz and 15 GHz, two frequency bands of interest for 6G research, including radio access network (RAN) infrastructure and satellite communications. The demonstration showed how dual polarization can increase data throughput in FR3 systems. In the exhibition setup, the companies reached a projected data transmission rate of 1.7 Gbps using 100 MHz bandwidth, 4096 QAM, and dual stream transmission. This corresponds to about twice the throughput of a comparable single stream configuration. The result gives an example of how FR3 can support high bandwidth, high order modulation, and multi-stream wireless links. Pegatron also tested its FR3 phased array antenna in a standard office environment. Under the 5G NR protocol, the system reached a peak expected data rate of 1.4 Gbps across an indoor distance of 40 meters. The setup used 100 MHz bandwidth, 1024 QAM, and dual stream transmission. This test adds a more practical scenario to the exhibition result and helps compare laboratory style verification with indoor deployment conditions. For the verification work, Pegatron leveraged the multi-channel analysis capabilities of the FSWX signal and spectrum analyzer together with the R&S SMW200A vector signal generator. Earlier measurements relied on a conventional spectrum analyzer, where horizontal and vertical signal controls had to be adjusted separately. The newer setup based on the game-changing architecture of the FSWX made it possible to analyze multiple channels in parallel and to obtain results that are closer to actual system behavior. The collaboration reflects ongoing work around FR3 for 6G, radio access infrastructure, satellite links, and other high data rate wireless applications. Alexander Pabst, Vice President Market Segment Wireless Communications at Rohde & Schwarz, said: "FR3 is expected to provide the highly demanded additional spectrum for 6G. Wider bandwidth, higher order modulation and massive MIMO demand evolved test and measurement equipment. Rohde & Schwarz test solutions play a central role in the verification of demanding wireless and phased array performance criteria. With its new architecture, the FSWX combines multiple input ports, cross correlation capabilities, advanced filter banks and broadband ADCs to address complex signal analysis tasks at unprecedented speed and accuracy." William Wu, Director of the Communication Technology Center at Pegatron, said: "As 6G enters the critical phases of standardization and technology R&D, the FR3 frequency band has become a pivotal battleground for future wireless innovation. Pegatron continues to invest in next-generation wireless technology. Having successfully developed 13 GHz (FCC) / 15 GHz (ITU) phased array antenna technology, which integrates array antennas, BFICs, and RF frontends with beamforming, H/V (Horizontal/Vertical) dual-linear polarization, and multi-channel designs, we have built robust beam control and high-speed transmission capabilities for the FR3 band. Moving forward, we are expanding our FR3 portfolio by actively developing 7 GHz / 8 GHz array antenna modules for Massive MIMO."

Panasonic industry Europe to exhibit at space Tech expo in bremen. Rohde & Schwarz to demonstrate technologies supporting Europe's sovereignty and security at Space Tech Expo Europe. November 3, 2026 Satellite Testing Solutions - The demonstrations address rising system complexity, cost pressure and shorter development cycles in satellite development. These pressures are reinforced by the shift toward non-terrestrial networks, where satellites in multiple orbits complement 3GPP-based infrastructure to extend coverage to remote and underserved areas, while performing comparable terrestrial functions. Reliable testing, secure monitoring and scalable production capabilities are essential for building sovereign satellite infrastructure in Europe. Discover more Tech industry updates AI accelerator chips Medical electronics devices For high-throughput satellite component testing up to 54 GHz, Rohde & Schwarz will demonstrate the R&S ZNB3032 vector network analyzer. Designed for high-volume RF manufacturing, it combines fast, stable measurements with flexible upgrade options for changing test requirements. For ground station installation, operation and maintenance, Rohde & Schwarz will present portable handheld spectrum and network analyzers, including the one-port R&S Cable Rider ZPH. Rugged and compact, they support impedance and distance-to-fault measurements on transmission lines, spectrum analysis and precise power measurements. Another exhibit combines the R&S SMW200A vector signal generator and FSW signal and spectrum analyzer with Ansys Systems Tool Kit for advanced satellite channel emulation. The setup emulates dynamic LEO satellite channels in real time, including Doppler shift, path loss and varying link conditions. Engineers can analyze next-generation satellite communication systems under realistic pre-deployment conditions, gaining better insight into link behavior and shortening validation cycles. Rohde & Schwarz will also show satellite component and payload testing in the E-band with 8 GHz wide satellite signals. The setup is featuring the R&S SFI100A wideband IF vector signal generator with R&S FE110ST/SR frontends and the new FSWX. Designed for the demands of next-generation broadband satellite systems, this solution delivers the precision, performance and insight needed to validate advanced satellite components and payloads with confidence. The company will also address signal and power integrity with oscilloscopes such as the R&S RTO6, R&S RTH and R&S MXO 38. The instruments support early analysis of digital interfaces such as MIL STD 1553A, Space Wire, Space CAN, Ethernet, I[2]C, RS 422 and JESD204C. These measurements help detect interface and signal integrity issues early before they lead to failures in space, where repair is usually impossible. Furthermore, Rohde & Schwarz shows the R&S SATCOM Link Observer for continuous link quality monitoring of satellite communications. It combines classic spectrum analyzer functions, 24/7 trapping systems, advanced signal detection, signal analysis and classification in one system. The system provides real time network visibility, automatic error detection and remote spectrum monitoring. Operators can maintain quality of service and interference-free links while reducing personnel for manual monitoring. Rohde & Schwarz will also present an antenna combiner for improved signal quality in challenging reception conditions. It is designed for challenging conditions, such as situations where a 7-meter dish is not available. By combining signals from up to four smaller antennas, it improves the signal-to-noise ratio and increases deployment flexibility. Beyond test and monitoring solutions, Rohde & Schwarz will present its electronic manufacturing services. These services help space-industry customers meet stringent quality requirements, achieve high production yields and outsource component manufacturing where needed. Medical electronics devices Discover more Electronics news subscription