E

EMCOR Group

End-to-end mechanical and electrical construction services

HVAC Tech

Full-TimeDeadline 9/11/27
$30 - $35/hr
Senior
Bachelor's, Certification
Downers Grove, IL, USA
In PersonDaily local travel between customer properties is required.
Field ServiceEquipment Field Service

About the job

Requirements
  • A certified two-year HVAC technical certificate or state-approved HVAC license is required.
  • Five years of HVAC/general maintenance experience, including electrical, plumbing, and carpentry, or an equivalent combination of training, education, and experience is required.
  • Experience working on industrial or commercial HVAC equipment and systems is required as the scope demands.
  • Must possess applicable certifications and licenses, a valid driver’s license in good standing, and an EPA Universal Refrigeration License.
  • Must be able to read and comprehend safety policies, operating and maintenance instructions, and procedure manuals; write routine reports and correspondence; and present information in individual and small-group settings.
  • Must be able to use handheld devices and business systems or document-management database software, including Microsoft Office, Microsoft Outlook, Word, and Excel.
  • Must comply with applicable codes, regulations, governmental agency and company directives related to building operations and work safety, including OSHA standards and company safety policies.
  • Experience installing, maintaining, troubleshooting, and repairing building mechanical systems, including HVAC, plumbing, and electrical systems.
  • Must be able to meet the physical demands of the role, including standing, walking, climbing, lifting up to 75 pounds occasionally, and working in the listed environmental conditions.
  • Must drive a company vehicle daily and use required safety equipment while following OSHA lockout/tagout, HAZCOM, and other company and customer safety initiatives.
  • Must be able to handle stressful situations and remain calm in front of customers.
Responsibilities
  • Perform preventive, corrective, and predictive maintenance, troubleshooting, and service on commercial HVAC systems at customer sites.
  • Complete thorough preventive maintenance checks and services on standard packaged and split-unit HVAC systems, including inspecting and repairing or replacing belts and pulleys; inspecting and cleaning condensate drain lines; testing compressor, fan motor, and blower motor power and performance; testing burners, heat exchangers, and safety and operational controls.
  • Repair steam and hot-water boiler systems and diagnose airflow and ducting issues.
  • Use refrigerants safely and efficiently in compliance with EPA requirements when servicing standard packaged and split-unit HVAC systems.
  • Diagnose and repair common mechanical, electrical, and system failures in boilers and packaged and split-unit HVAC systems, including motors, belts, pulleys, compressors, condensing units, evaporators, circuit boards, contactors, leaks, and copper components requiring unsweating and brazing.
  • Complete preventive maintenance and repairs according to work orders and company procedures, regulatory requirements, and safety standards.
  • Perform minor plumbing maintenance on existing systems, including unclogging toilets and drains, repairing leaks in drains and faucets, and replacing toilet and faucet fixtures as needed.
  • Perform routine painting and carpentry to maintain client facilities, including repairing drywall, preparing the area, and matching paint for a uniform appearance.
  • Perform minor electrical maintenance as permitted by state law, including repairing or replacing fixtures, wall switches, and outlets, and replacing light bulbs, ballasts, and sockets as needed.
  • Complete service and asset inspections as needed.
  • Use tablets, smartphones, and related technology to access and complete work orders with service notes; create and submit service reports and quality-inspection images and reports; and submit timesheets, expense reports, and purchase-card logs.
  • Obtain materials and supplies needed to complete assigned tasks.
  • Maintain a positive client relationship, support customer satisfaction, and communicate consistently and promptly with customers and internal support teams.
  • Complete required safety and compliance training and attend weekly safety meetings.
  • Provide estimates for larger projects and services needed at customer sites.
  • Complete assigned work orders promptly and communicate work-order status through the designated business process.
  • Perform assigned daily repairs, emergency maintenance, and preventive maintenance.
  • Travel locally between properties daily.
Desired Qualifications
  • A high school diploma or degree/certification, or equivalent professional experience in landscaping, the trades (electrical, HVAC, plumbing, etc.), or specialty floor care is preferred.

About the company

EMCOR Group provides mechanical and electrical construction, industrial and energy infrastructure, and building services. It delivers end-to-end solutions for complex projects by designing, integrating, installing, and maintaining systems through contracts and long-term service agreements. The company differentiates itself with deep technical expertise, a strong emphasis on safety and quality, and a broad mix of commercial, industrial, institutional, and governmental clients. Its goal is to reliably complete facilities and infrastructure projects and sustain ongoing maintenance and service for enduring client relationships.

Company Size

1,001-5,000

Company Stage

IPO

Headquarters

Norwalk, Connecticut

Founded

1994

Get referred to EMCOR Group

See people who can refer or advise you

Simplify Jobs

Simplify's Take

What believers are saying

  • Q2 2026 revenue hit $5.15 billion, up 19.8%, with 10.6% operating margins.
  • Management raised 2026 guidance on July 30 to $20.5 billion revenue and $33.25 EPS.
  • Data-center RPOs reached $4.46 billion in March 2026, fueling multi-year demand.

What critics are saying

  • EMCOR faces margin pressure from labor inflation and acquisition amortization in 2026.
  • The PEMEX Deer Park multidistrict litigation still names Repcon and EIS subsidiaries.
  • A major data-center execution failure in 2026-2027 would crush EMCOR's valuation.

What makes EMCOR Group unique

  • EMCOR owns 44% RPO growth to $17.14 billion, creating rare backlog visibility.
  • Miller Electric, B&B Electric, Schmidt, and Connelly expand EMCOR's electrical scale fast.
  • Thirty-five subsidiaries and 62% unionized workforce let EMCOR self-perform complex work.

Help us improve and share your feedback! Did you find this helpful?

Benefits

Health Insurance

Dental Insurance

Vision Insurance

Health Savings Account/Flexible Spending Account

Life Insurance

Disability Insurance

Company News

MarketScreener
Oct 8th, 2026
EMCOR Group, inc.: wiring the AI economy.

EMCOR Group, inc.: wiring the AI economy. Behind every AI data center sit thousands of tons of switchgear, chillers, cable trays and process piping, and someone has to install them. eader in mechanical and electrical construction and building services: it installs and maintains the power, cooling, fire protection and control systems that data centers, chip plants, hospitals and water utilities depend on. EMCOR has turned that unglamorous job into one of the most profitable growth stories in U.S. construction. Published on 10/08/2026 at 03:42 am EDT MarketScreener.com EMCOR operates in U.S. non-residential mechanical, electrical and plumbing contracting and in facility services, highly fragmented markets with few barriers to entry. Total U.S. construction spending reached a $2.2 trillion annual rate in August 2026, up 0.9% in the month, but growth is concentrated: Census data put data center construction at an $84.95 billion pace, up 73% YoY and more than nine times its January 2021 level. Data center starts total $98.5 billion so far in 2026, 24% of all non-residential building starts, with the average project more than doubling to $1.18 billion. Rising electrical and mechanical content per building, supply-chain reshoring, water infrastructure and energy-efficiency retrofits are the other growth drivers. Elsewhere, the market is soft: private non-residential spending fell 1.0% YoY to $773.0 billion in August, office construction dropped 9.7% and manufacturing 19.8%. Labor is the main bottleneck, as the industry must hire an estimated 349,000 workers in 2026 and 456,000 in 2027, with electricians especially scarce. Copper and steel prices, tariffs, interest rates, grid power availability and federal funding under the CHIPS Act and the IRA complete the list of industry risks. After selling its U.K. arm on December 1, 2025, EMCOR reports four U.S. segments. In 2025, Mechanical Construction (HVAC, process piping, fire protection) generated $7.05 billion, or 42% of revenue; Electrical Construction (power distribution, low-voltage and fiber systems) $5.07 billion (30%); Building Services (HVAC service, retrofits, controls, facility management) $3.12 billion (18%); and Industrial Services (refinery turnarounds, heat exchangers) $1.27 billion (7%). EMCOR's strengths include 100 subsidiaries from roughly 450 U.S. locations as well as $924 million in cash and just $6.1 million of debt as of June 2026, supporting bonding capacity for large projects. It also benefits from advanced prefabrication and virtual design capabilities and a safety incident rate below 1.0 versus 2.4 for the industry. Weaknesses include a 2.0% Industrial Services margin, lost facility contracts, weaker Electrical productivity that pushed margins from 13.4% to 12.1%, and a 62% unionized workforce. EMCOR competes with Comfort Systems USA, APi Group, Quanta Services, MasTec, MYR Group and IES Holdings in construction, and Carrier, Trane, CBRE, JLL and ABM in services. Comfort Systems is its closest peer, while Quanta and MasTec focus more on utility infrastructure. EMCOR differentiates itself by combining mechanical and electrical capabilities at national scale with strong local brands and a recurring service business. The portfolio is expanding quickly. EMCOR acquired Miller Electric for $876.8 million in 2025, followed by nine smaller deals. Five more electrical acquisitions in 2026 add roughly $625 million of revenue and $105 million of EBITDA for $750 million. RPOs reached a record $17.14 billion, up 43.9%, with Network and Communications representing 45% and Healthcare, Institutional and Water also growing. Revenue grew from $9.90 billion in 2021 to $16.99 billion in 2025, a 14.4% annual rate, including 16.6% growth in 2025 as acquisitions contributed $1.27 billion and data centers drove organic demand. First-half 2026 revenue rose another 19.7%, or 18.3% organically, to $9.78 billion, with full-year guidance of $20.00-20.50 billion versus $20.32 billion consensus. Profitability has expanded even faster: EBITDA increased from $994.7 million in 2023 at a 7.9% margin to $1.90 billion in 2025 at 11.2%, then reached $1.06 billion in the first half of 2026, up 28.6%. Net income rose from $633 million in 2023 to $1.27 billion in 2025 and $709.2 million in the first half of 2026, up 30.6%. ROA reached 15.0% and ROE 38.5% in 2025, while $112.8 million of CapEx - just 0.7% of revenue - left $1.19 billion of FCF Diluted EPS climbed from $7.06 in 2021 to $28.19 in 2025, supported by earnings growth and $586.3 million of share buybacks that reduced diluted shares to 44.6 million. EMCOR now guides to $32.00-33.25 for 2026, around the $32.85 consensus, with roughly $36.75 expected in 2027. The annualized dividend has increased to $1.60 after a 60% raise, but the payout ratio remains only about 5%. The stock trades at 25.7x trailing earnings, up from 16.0x at the end of 2023, and 22.4x 2027 earnings. EV/sales has similarly expanded from 0.80x in 2023 to 1.94x today, or 1.61x on 2027 estimates. During Q2 2026, EMCOR's growth accelerated, with revenue up 19.8% to a record $5.15 billion and organic growth of 19.6%. Operating income rose 31.8% to $547.3 million, lifting the operating margin to 10.6% from 9.6%, while SG&A fell to 9.2% of revenue from 9.7%. Net income increased 33.6% to $403.7 million and diluted EPS rose 34.8% to $9.06. Electrical revenue grew 24.0% with margins expanding to 13.9%, while Mechanical revenue grew 31.1%, though margins eased to 12.5%. RPOs reached a record $17.14 billion, up 43.9%, supporting an increase in full-year guidance to $20.00-20.50 billion of revenue, a 9.5-9.8% operating margin and EPS of $32.00-33.25. Regarding risks, Network and Communications represents 45% of EMCOR's RPOs, leaving the company increasingly exposed to data center spending. A slowdown in AI and cloud investment or limited grid power could weaken demand, while a nearly 26x earnings multiple leaves little room for disappointment. Fixed-price contracts also expose margins to cost overruns, tariffs and higher copper and steel prices, while projects in backlog can be delayed or cancelled. The decline in Electrical margins from 13.4% to 12.1% in 2025 shows the execution risk when expansion outpaces local labor and productivity. Labor is another constraint: skilled trades remain scarce, 62% of employees are unionized and EMCOR participates in roughly 200 multiemployer pension plans, creating potential withdrawal liabilities. Acquisitions add another layer of risk, with goodwill and intangibles reaching $2.54 billion, or 25% of assets. Underperforming deals could lead to impairments, while rapid growth has already pressured working capital and contributed to weaker operating cash flow in 2025 and the first half of 2026. EMCOR is well positioned to benefit from continued investment in data centers and other complex infrastructure. Strong revenue and earnings growth, record backlog, improving margins and a nearly debt-free balance sheet give the company solid momentum. The main risks are its growing exposure to data centers, labor constraints, project execution and a valuation that already reflects high expectations. EMCOR can continue to perform well if demand and margins hold, but the current share price leaves less room for execution misses. (C) MarketScreener.com - 2026

Yahoo Finance
Sep 23rd, 2026
Claude AI picks EMCOR and NVIDIA for $100K hedge fund, EME up 8.3%

Rallies Arena has given Claude AI a $100,000 stock portfolio to manage, challenging it to beat the S&P 500. The platform provides AI models with real money and real-time financial data, publishing every trade. Claude's largest holding is EMCOR Group at 17.7% of the portfolio, worth $18,854, up 8.3% since entry at $696.40. NVIDIA is the second-largest position at 10.6%, worth $13,131, up 25.6% from $183.45. EMCOR builds physical systems for data centres, including electrical distribution and cooling systems. Bulls cite the company's positioning in AI infrastructure, with second-quarter 2026 revenue rising 20% year-over-year and backlog up 44%. Bears note slower backlog conversion and margin pressure from higher labour costs.

Yahoo Finance
Aug 20th, 2026
EMCOR wins with 35.7% EPS growth while PlayStudios and Camping World struggle with declining revenues

PlayStudios offers free-to-play digital casino games but faces declining revenue, dropping 4.1% annually over five years. The company generates weak free cash flow and shows diminishing returns on capital, indicating poor management decisions. Its shares trade at $0.50, representing 0.3x forward price-to-sales. Camping World, an RV and outdoor equipment retailer founded in 1966, struggles with lagging same-store sales and carries a high net-debt-to-EBITDA ratio of 8x. Share issuance caused earnings per share to plunge 67.5% annually. The stock trades at $6.85, implying 8.8x forward P/E. EMCOR, providing electrical, mechanical, and building construction services through over 70 subsidiaries, demonstrates strong performance with 16.3% annual revenue growth over two years. Share repurchases helped drive earnings per share growth of 35.7%, exceeding revenue gains whilst improving returns on capital.

The Peakstone Group
Aug 7th, 2026
Peakstone Advises on Sale of Schmidt Electric

Schmidt Electric was founded by Bobby Schmidt in 1984 and acquired by Ben Frank in 2017. Today, the company self-performs electrical work on many of the premier, high profile regional projects for end users in the healthcare, state and local government, semiconductor, airport, industrial and data center sectors with a workforce of over 400 IBEW union electricians. Schmidt Electric differentiates itself by self-performing a full range of medium and low voltage electrical contracting services for the largest general contractors and end users in Austin, San Antonio, Houston and surrounding areas.

MarketBeat
Jul 18th, 2026
Top industrial stocks worth watching - july 18th.

Top industrial stocks worth watching - july 18th. July 18, 2026 Key points. * Caterpillar, Coherent, Linde, EMCOR Group, and Eaton were highlighted as the top industrial stocks to watch, based on MarketBeat's stock screener and recent trading activity. * The article frames industrials as companies tied to manufacturing, construction, transportation, and broader economic growth, often benefiting from infrastructure spending and business investment. * Each featured company represents a different corner of the sector, from heavy equipment and industrial gases to power management and building services. * Five stocks to consider instead of Caterpillar. Caterpillar, Coherent, Linde, EMCOR Group, and Eaton are the five Industrial stocks to watch today, according to MarketBeat's stock screener tool. Industrial stocks are shares of companies that make products, provide services, or supply equipment used in manufacturing, construction, transportation, and other parts of the broader industrial economy. For stock market investors, the term typically refers to businesses such as airlines, machinery makers, defense contractors, and logistics companies, which tend to benefit from economic growth, infrastructure spending, and business investment. These companies had the highest dollar trading volume of any Industrial stocks within the last several days. Caterpillar (CAT). Caterpillar Inc. manufactures and sells construction and mining equipment, off-highway diesel and natural gas engines, industrial gas turbines, and diesel-electric locomotives in worldwide. Its Construction Industries segment offers asphalt pavers, compactors, road reclaimers, forestry machines, cold planers, material handlers, track-type tractors, excavators, telehandlers, motor graders, and pipelayers; compact track, wheel, track-type, backhoe, and skid steer loaders; and related parts and tools. Coherent (COHR). Coherent Corp. develops, manufactures, and markets engineered materials, optoelectronic components and devices, and optical and laser systems and subsystems for the use in the industrial, communications, electronics, and instrumentation markets worldwide. It operates through three segments: Networking, Materials, and Lasers. Linde (LIN). Linde plc operates as an industrial gas company in the Americas, Europe, the Middle East, Africa, Asia, and South Pacific. It offers atmospheric gases, including oxygen, nitrogen, argon, and rare gases; and process gases, such as carbon dioxide, helium, hydrogen, electronic gases, specialty gases, and acetylene. Discover more text messages MarketBeat premium subscription American Consumer News EMCOR Group (EME). EMCOR Group, Inc. provides construction and facilities, building, and industrial services in the United States and the United Kingdom. It offers design, integration, installation, start-up, operation, and maintenance services related to power transmission, distribution, and generation systems; energy solutions; premises electrical and lighting systems; process instrumentation; low-voltage systems; voice and data communications systems; roadway and transit lighting, signaling, and fiber optic lines; computerized traffic control systems, and signal and communication equipment; heating, ventilation, air conditioning, refrigeration, and geothermal solutions; clean-room process ventilation systems; fire protection and suppression systems; plumbing, process, and high-purity piping systems; controls and filtration systems; water and wastewater treatment systems; central plant heating and cooling systems; crane and rigging services; millwright services; and steel fabrication, erection, and welding services. Eaton (ETN). Eaton Corporation plc operates as a power management company worldwide. The company's Electrical Americas and Electrical Global segment provides electrical components, industrial components, power distribution and assemblies, residential products, single and three phase power quality and connectivity products, wiring devices, circuit protection products, utility power distribution products, power reliability equipment, and services, as well as hazardous duty electrical equipment, emergency lighting, fire detection, explosion-proof instrumentation, and structural support systems. Further reading. This instant news alert was generated by narrative science technology and financial data from MarketBeat in order to provide readers with the fastest reporting and unbiased coverage. Please send any questions or comments about this story to [email protected]. Before you consider Caterpillar, you'll want to hear this. MarketBeat keeps track of Wall Street's top-rated and best performing research analysts and the stocks they recommend to their clients on a daily basis. MarketBeat has identified the five stocks that top analysts are quietly whispering to their clients to buy now before the broader market catches on... and Caterpillar wasn't on the list. While Caterpillar currently has a Moderate Buy rating among analysts, top-rated analysts believe these five stocks are better buys. The AI wave will soon hit public markets with Anthropic and OpenAI set to go public later this year. However, you don't have to wait to invest. This report shows seven AI stocks that you can buy today while the big model providers get ready to go public.