Commonwealth Fusion Systems

Develops high-temperature superconducting fusion magnets

Quality Engineer

Quality EngineeringConfirmed live in the last 24 hours

Full-timeDevens, MA, USA$107k - $160k /yr

About the Job

Requirements

A bachelor's degree in Mechanical, Industrial, Material Science, or Manufacturing Engineering is required.
A minimum of 5 years of engineering experience in a manufacturing, assembly, or equipment manufacturing environment is required.
1-2 years of Quality Engineering experience is required.
Knowledge of ISO 9001-2015, Six Sigma, Statistical Process Control (SPC), Process Capability Analysis, PFMEA, Measurement System Analysis (MSA), and APQP is required.
Ability to occasionally lift up to 50 pounds is required.
Willingness to travel or work required nights, weekends, or on-call occasionally is required.
Ability to perform activities such as stooping, climbing, typing, standing, or sitting for extended periods is required.
Ability to work in a facility with industrial hazards including heat, cold, noise, fumes, strong magnets, lead, high voltage, high current, pressure systems, and cryogenics is required.
The role requires compliance with U.S. laws concerning the export of controlled or protected technologies or information.

Responsibilities

Take ownership of the end-to-end Non-Conformance Report (NCR) workflow on the production floor, promptly identify deviations, lead material dispositioning, and conduct 8D Root Cause Analyses (RCA) to implement Corrective and Preventive Actions (CAPA).
Drive process stability by ensuring the execution of Quality Plans and detailed Process Plans for HTS Magnet manufacturing and SPARC assemblies, and support the development and maintenance of Control Plans where applicable.
Monitor process health and hardware quality for low-volume, complex production; collect and analyze discrete manufacturing data, including defect trends, inspection results, and Measurement System Analysis (MSA), to ensure reliable measurements without relying on high-volume statistical methods.
Provide technical oversight and leadership for high-priority quality inspections during the off-shift and execute established measurement and inspection methods to ensure hardware adheres to engineering requirements.
Partner with Manufacturing and Engineering teams to refine manufacturing instructions and Process Plans, ensuring quality-critical characteristics are documented clearly and can be verified on the shop floor.
Support the supplier quality team by identifying and documenting supplier-related defects found during internal production, and assist with root cause data collection and action plans.

Desired Qualifications

Knowledge of GD&T and metrology.
Knowledge of non-destructive evaluation (NDE) methods, including dye penetrant, ultrasonic, computerized tomography, and X-ray.
Knowledge of cryogenics.
Experience with Minitab or JMP, Microsoft Excel including VBA, and Microsoft Visio.
Experience with assembly of large metallic components.
Experience with a CMM or Romer Arm.
Experience with welding processes and nondestructive testing.
Experience with cryogenic plants, systems, and environments.

Salary Range: 107000 to 160000 (Currency: USD) (Pay period: per-year-salary)

About Commonwealth Fusion Systems:

Commonwealth Fusion Systems is on a mission to deliver the urgent transition to fusion energy.

Combining decades of research, top talent, and new technologies, we’re designing and building commercially viable fusion power plants. And we're working with policymakers, suppliers, and many others to build the energy industry of the future.

We’re in the best position to make it happen. Since 2018, we’ve raised $4 billion of capital, making us the largest and leading fusion company in the world.

Now we’re looking for more thinkers, doers, builders, and makers to join us. People who’ll bring new perspectives, solve tough problems, and thrive as part of a team.

If that’s you and this role fits, we want to hear from you.

Join the power movement as a Quality Engineer

Commonwealth Fusion Systems (CFS) is looking for dedicated and highly motivated off-shift Quality Engineers to oversee manufacturing process quality for our HTS Magnet production and the SPARC Project. In this high-impact, hands-on role, you will take ownership of process stability and defect resolution on the production floor, ensuring our manufacturing processes yield reliable, first-of-a-kind hardware. You will partner closely with Manufacturing and Engineering teams to monitor process health, lead root cause investigations, and manage the end-to-end Non-Conformance Report (NCR) workflow. By implementing robust process controls and risk-informed corrective actions, you will resolve complex fabrication challenges and directly enable the SPARC project mission.

What you'll do:

NCR Management & Defect Resolution:
Take ownership of the end-to-end Non-Conformance Report (NCR) workflow on the production floor. Promptly identify deviations, lead material dispositioning, and conduct 8D Root Cause Analyses (RCA) to implement robust Corrective and Preventive Actions (CAPA)
Process Plan Execution:
Drive process stability by ensuring the successful execution of Quality Plans and detailed Process Plans for HTS Magnet manufacturing and SPARC assemblies. Support the development and maintenance of Control Plans where applicable
First-of-a-Kind (FOAK) Quality Monitoring:
Monitor process health and hardware quality for low-volume, complex production. Collect and analyze discrete manufacturing data, focusing on defect trending, inspection results, and Measurement System Analysis (MSA) to ensure reliable measurements without relying on high-volume statistical methods
On-Shift Quality Execution:
Provide technical oversight and leadership for high-priority quality inspections during the off-shift. Execute established measurement and inspection methods to ensure all hardware strictly adheres to engineering requirements
Manufacturing Instruction Refinement:
Partner closely with Manufacturing and Engineering teams to refine detailed manufacturing instructions and Process Plans. Ensure that quality-critical characteristics are accurately documented, easily understood, and verifiable on the shop floor
Supplier Quality Support:
Support the supplier quality team by identifying and documenting supplier-related defects discovered during internal production, assisting with root cause data collection and action plans as needed

What we’re looking for:

BS in Mechanical, Industrial, Material Science or Manufacturing Engineering
Minimum 5 years of Engineering experience in a manufacturing, assembly or equipment manufacturing environment
1-2 years of Quality Engineering experience
ISO 9001-2015, Six Sigma, Statistical Process Control (SPC), Process Capability Analysis, PFMEA, Measurement System Analysis (MSA), APQP
Excellent communication and organization skills

Bonus points for:

GD&T and Metrology
Knowledge of NDE (non-destructive evaluation) methods including dye penetrant, ultrasonic, computerized tomography, and x-ray
Knowledge of cryogenics
Minitab or JMP, MS Excel (including VBA), MS Visio
Experience with assembly of large metallic components
Experience with CMM or Romer Arm
Experience with Welding Process and Nondestructive Testing
Experience with cryogenic plants, systems, and environments

Must-have Requirements:

Ability to occasionally lift up to 50 lbs
Willingness to travel or work required nights/weekends/on-call occasionally
Perform activities such as stooping, climbing, typing, standing, or sitting for extended periods of time
Work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, lead (Pb), high voltage, high current, pressure systems, and cryogenics

#LI-Onsite

At CFS, we excel in fast-paced environments, driven by our values of integrity, execution, impact, and self-critique. As we grow, we’re eager to bring on mission-driven folks who offer diverse perspectives and fresh ways to tackle challenges.

We value diversity deeply and are proud to be an equal opportunity employer by choice. We consider all qualified applicants equally, regardless of race, color, national origin, ancestry, citizenship status, protected veteran status, religion, physical or mental disability, marital status, sex, sexual orientation, gender identity or expression, age, or any other basis protected by law.

This role requires compliance with U.S. laws concerning the export of controlled or protected technologies or information (collectively, “Export Control Laws"). Any offer of employment will be contingent on the need for compliance with such Export Control Laws.

About the Company

Commonwealth Fusion Systems

Develops high-temperature superconducting fusion magnets

Commonwealth Fusion Systems builds fusion energy systems that aim to provide clean, affordable power. It designs tokamaks using high-temperature superconducting magnets to make smaller, less expensive machines. Its flagship SPARC is intended to produce net energy, with ARC envisioned as the first commercial fusion power plant. The company collaborates with MIT and focuses on a data-driven, mission-focused path to scalable fusion energy for large energy users.

Company size: 1,001-5,000
Company stage: Grant
Total funding: $4B
Headquarters: Harvard, MA
Founded: 2018

Recently Posted Jobs

Explore more opportunities at Commonwealth Fusion Systems

See more jobs