V

Valar Atomics

Manufactures nuclear fission reactors for hydrocarbons

Staff Electrical Engineer

Power Systems EngineeringConfirmed live in the last 24 hours
Full-timeTorrance, CA, USA

About the Job

Requirements

  • A bachelor's degree in Electrical Engineering or a closely related discipline.
  • At least 8 years of electrical engineering experience in process, industrial, or power projects focused on medium- and low-voltage distribution system design.
  • End-to-end ownership of the electrical scope on at least one major capital project, from front-end design through commissioning and energisation.
  • A track record of technical leadership, including leading design reviews, checking and approving other engineers' work, and setting or improving discipline standards, calculation methods, or study practices.
  • Expert-level proficiency in power system analysis software such as SKM Power Tools, ETAP, or equivalent, including ownership of study models and approval of load-flow, short-circuit, and protection-coordination studies.
  • Substantial protection engineering experience, including developing or approving relay settings and coordination studies for medium-voltage systems.
  • Experience preparing and checking arc-flash studies to IEEE 1584 and grounding designs to IEEE 80.
  • Strong working knowledge of IEEE, NEMA, ANSI, CSA C22.1, and IEC 60364 electrical standards, sufficient to establish and defend design standards against them.
  • Experience leading vendor technical evaluations and factory-acceptance activities for major electrical equipment packages.
  • Experience mentoring, directing, or supervising the technical work of other engineers or designers.
  • Proficiency with AutoCAD or equivalent electrical design tools.

Responsibilities

  • Serve as the responsible engineer and discipline technical authority for assigned electrical systems; review and approve power system studies, protection settings, sizing calculations, specifications, and design deliverables produced by engineers, contractors, and vendors.
  • Establish, maintain, and enforce discipline engineering standards, including calculation methodologies and study bases, design and drawing standards, equipment specification templates, installation specifications, and protection-settings philosophy across projects and sites.
  • Lead electrical system architecture and technology selection for first-of-a-kind and unconventional applications, including novel power-conversion interfaces, large drive systems, emergency and standby power architectures, and unusual load or fault characteristics; conduct trade studies, engage vendors, and plan qualification.
  • Lead electrical discipline participation in interdisciplinary design reviews, HAZOP studies, constructability reviews, and licensing-support activities; represent the discipline and resolve cross-discipline technical conflicts.
  • Define electrical vendor strategy, including preferred equipment platforms and manufacturers, standardization decisions, make-or-buy evaluations, and framework specifications for downstream project work.
  • Mentor senior and junior electrical engineers; develop discipline checking, training, and qualification practices; contribute to hiring and technical interviewing for the electrical team.
  • Own the power-system study basis for assigned facilities; perform and approve load-flow, short-circuit (ANSI/IEC), voltage-drop, motor-starting, and harmonic analyses using SKM Power Tools, ETAP, or equivalent, and maintain master study models.
  • Own arc-flash hazard analysis to IEEE 1584 and substation grounding design to IEEE 80; approve sizing of transformers, cables, switchgear buses, capacitor banks, and UPS/battery systems.
  • Own single-line diagram development for medium- and low-voltage distribution from utility interface through final distribution; approve equipment arrangements, cable schedules, tray routing, and underground duct-bank designs.
  • Specify and approve medium-voltage switchgear, low-voltage switchboards, MCCs, panelboards, transformers, bus ducts, VFDs, UPS systems, and standby generator packages; own electrical area classification and hazardous-area equipment selection to NEC/CEC 500 or IEC 60079.
  • Own protection engineering for assigned systems by defining protection and coordination philosophy, approving relay-settings studies and time-current coordination, and approving relay-panel arrangements, DC control schematics, and MCC control-wiring designs.
  • Lead vendor pre-qualification, technical bid evaluation, and award recommendations for major electrical packages; direct vendor document-review cycles; lead factory audits and witness testing for safety-related or nuclear-classified equipment.
  • Own electrical installation specifications and direct pre-commissioning and energisation activities, including insulation testing, relay secondary injection, and staged energisation planning; resolve significant site technical queries.
  • Lead root-cause analysis for significant electrical failures and events, drive corrective actions to closure, and incorporate lessons learned into discipline standards and study models.
  • Coordinate with I&C engineers on motor and drive control interfaces and protection-control integration; coordinate with civil and structural disciplines on substation layout and cable-penetration requirements.
  • Provide technical direction to contractors and consultants on electrical scope; review, redline, and approve contractor deliverables for compliance with project standards and nuclear quality requirements.
  • Maintain disciplined engineering records consistent with nuclear quality requirements, ensuring traceability of design decisions, analyses, and test results.

Desired Qualifications

  • Professional Engineer (P.E./P.Eng.) registration or equivalent.
  • Experience with nuclear facility electrical design and nuclear classification requirements, including IEEE 384 and CSA N290.7.
  • Experience developing electrical architecture or equipment solutions for novel or severe applications without established plant precedent.
  • Familiarity with seismically qualified electrical equipment under IEEE 344.
  • Experience with IEC 61850 substation automation and protection communication.
  • Experience with DC systems and battery sizing under IEEE 485/1115.
  • Experience with utility interconnection studies and PPA technical interface requirements.

About the Company

Valar Atomics

Manufactures nuclear fission reactors for hydrocarbons

Valar Atomics focuses on mass manufacturing nuclear fission reactors that are designed to synthesize abundant, low-cost hydrocarbons to power the global economy and lower energy costs. Its product concept combines a fleet of reactors with a chemical production pathway that uses the energy from fission to drive hydrocarbon synthesis, aiming to create a scalable, inexpensive energy and fuel supply. The company differentiates itself by pursuing an unproven commodities market tied to its reactors and hydrocarbon production, seeking to build a broad customer base across industries and economies in need of affordable energy. The short-term goal is to attract engineers and secure funding to advance development, with a longer-term objective of providing a sustainable and cost-effective energy solution at large scale.

Company size
51-200
Company stage
Series B
Total funding
$1.8B
Headquarters
El Segundo, CA
Founded
2023

Recently Posted Jobs

Explore more opportunities at Valar Atomics

See more jobs