Technip Energies

Engineering and technology solutions for energy

Senior HVAC Engineer / HVAC Engineer

Building Services EngineeringConfirmed live in the last 24 hours

Full-timeKuala Lumpur, Federal Territory of Kuala Lumpur, MalaysiaNo salary listed

About the Job

Requirements

A degree in Mechanical Engineering (B.E. Hons) is required.
At least 7 years of engineering design experience across various HVAC system types for onshore and offshore applications, industrial plants, and plumbing systems is required.
Candidates must be willing to travel and be stationed at engineering operating centers or client offices as needed for overseas assignments.
One to two years of site experience is required.
Candidates must be able to maintain professional relationships with clients, peers, equipment vendors, and suppliers.
A good professional check or feedback from past employers or clients is required.
Candidates must be competent in applying and interpreting design codes, industry standards, and practices such as ASHRAE, SMACNA, and ISO, and in resolving problems based on codes and standards.
Candidates must understand client specifications, including PTS and DEP, and meet contract requirements; they must review tender, client, and contractual documents and raise clarifications where definitions or references are ambiguous.
Candidates must understand HVAC equipment and systems used in oil and gas, refinery, and industrial applications for onshore and offshore work, and select equipment appropriate to process service applications.
Candidates must demonstrate engineering competence in hydraulics, thermodynamics, heat transfer, and control systems.
Candidates must be able to propose, modify, or rewrite custom specifications for conceptual, front-end engineering design, detailed engineering, engineering, procurement and construction projects, and proposals.
Candidates must be able to prepare engineering calculation reports, including heat-load, duct-pressure-loss, and plumbing-hydraulics calculations.
Candidates must be able to provide schematic guidance for detailed drawings, including flow-rate diagrams, ducting and instrumentation diagrams, piping and instrumentation diagrams, and equipment layouts.
Candidates must be able to participate independently in resolving equipment-testing failures, deficiencies, underperformance, and discrepancies.
Candidates must be able to respond to site technical queries regarding equipment design, installation, and mechanical completion for field acceptance.
Candidates must be able to evaluate HVAC system options for efficiency and cost savings during proposals and project execution.
Candidates must be able to review documents prepared by peers or subordinates and provide guidance and training.
Candidates must understand HVAC and plumbing equipment and systems, including air-cooled chillers, water-cooled chillers, and packaged direct-expansion units; identify suitable materials and review vendor-proposed materials.
Candidates must be able to select and size equipment using catalogs and vendor input, and work with vendors on customized systems to meet project requirements.
Candidates must be able to prepare calculation notes, technical data sheets, job and equipment specifications, material requisitions, technical clarifications, technical bid evaluations and recommendations, and equipment-selection study reports.
Candidates must be able to provide input to other disciplines' deliverables, including layouts and utility requirements, as well as weight data, foundation loading, equipment interface details, and equipment-list inputs.
Candidates must be able to review vendor data against codes, standards, local regulations, project requirements, and discipline requirements.
Candidates must be able to interface with piping and stress, process, civil, electrical, structural, and instrumentation disciplines and resolve interface conflicts.
Candidates must understand subcontractor and installer shop drawings, review technical cards for bulk materials, and participate in testing and commissioning, including troubleshooting problems.
When assigned as Lead Engineer, candidates must be able to commit to project objectives, monitor progress, and execute work using appropriate resources.
Candidates must be able to coordinate and plan project execution resources.
Senior Engineers with more than 10 years of experience must be able to carry out technical audits when requested by the Department Manager.
Candidates must be able to investigate and resolve quality complaints or incidents raised by interested parties or requested by the client or project manager.
Candidates must exercise professional judgment and respond proactively to deliver HVAC work that meets project needs and handles complex project demands.
Candidates must produce quality engineering deliverables and present work to meet client satisfaction.
Candidates must fulfill quality-assurance and health, safety, and environment requirements.
Candidates must be able to supervise, coach, and guide junior engineers.
Candidates must be able to act as the primary contact for proposals involving HVAC scope.

Responsibilities

Perform detailed engineering design on current onshore and offshore projects and support departmental and engineering operations.
Select and engineer appropriate HVAC equipment and systems for project applications.
Prepare HVAC calculations, reports, specifications, technical documents, and schematic guidance for detailed drawings.
Resolve equipment-testing issues and respond to site queries concerning equipment design, installation, and mechanical completion.
Identify efficient and cost-saving HVAC system options during proposals and project execution.
Review peer and subordinate documents and provide technical guidance and training.
Prepare and review equipment-selection documentation, vendor data, material requisitions, technical bid evaluations, and other working deliverables.
Coordinate with other engineering disciplines and resolve interface issues.
Support site supervision, testing, commissioning, troubleshooting, and progress improvements.
As Lead Engineer, monitor project progress and coordinate resources to meet delivery objectives.
Conduct technical audits when requested and investigate and resolve quality complaints or incidents.
Supervise, coach, and guide junior engineers.
Serve as the HVAC lead contact for proposals.

Be part of the solution at Technip Energies and embark on a one-of-a-kind journey. You will be helping to develop cutting-edge solutions to solve real-world energy problems.

We are currently seeking a TS - Senior HVAC Engineer/HVAC Engineer to join our team based in Kuala Lumpur.

Successful candidates would be offered a fixed term of employment.

About us:

Technip Energies is a global technology and engineering powerhouse. With leadership positions in LNG, hydrogen, ethylene, sustainable chemistry, and CO2 management, we are contributing to the development of critical markets such as energy, energy derivatives, decarbonization, and circularity. Our complementary business segments, Technology, Products and Services (TPS) and Project Delivery, turn innovation into scalable and industrial reality.

Through collaboration and excellence in execution, our 17,000+ employees across 34 countries are fully committed to bridging prosperity with sustainability for a world designed to last.

About the mission we offer you:

Perform Engineering detailed design on current projects for onshore /offshore projects and to fulfill Departmental needs and support engineering operation within the Company.

DESIGN BASIS, CODE & STANDARD

Competent applying the knowledge of design codes, industries standard and practices such as ASHRAE/SMACNA/ISO, etc. and Interpretation of the requirements to meet project requirement
Competent to resolve problems /trouble shoot based on Codes & Standards interpretation
Understand codes limitation, apply with accuracy and effectiveness.
Understanding of Client’s specification (e.g. PTS, DEP etc.) and provide service which meet contract requirements
Review and raise clarifications on the ITB /Client documents/ Contractual documents in case of ambiguity in definition / lack of clarity / lack of reference/ areas of doubt etc. based on experience /judgment or the report from Engineers.

2. KNOWLEDGE OF HVAC EQUIPMENT AND SYSTEM

Understanding of HVAC equipment and its overall system used generally in oil and gas / refinery / Industries for onshore and offshore applications, and able to decide on the correct types of equipment for a given process service application.
Understanding and Engineering competence in hydraulics, thermodynamics, heat transfer, control system, etc
Able to propose, modify or re-write the custom specification which suit the nature of awarded project (i.e. Conceptual , FEED, Detailed engineering , EPC nature or Proposal ).
Competent to do the engineering calculation report, such as Heat Load, Duct Pressure Loss, Plumbing hydraulics etc.
Competent to provide the guide schematics for detailed drawings by Designer and Drafters. These drawings includes Flow Rates Diagram, Ducting and Instruments Diagram (D&ID), P&IDs and Equipment layout.
Competent to participate effectively and independently to resolve any issues related to equipment testing – in case of failures / deficiencies /under-performance /discrepancy during shop testing.
Competent to provide support by responding to Site queries (STQ) regarding equipment engineering design /equipment installation / Mechanical completion for field acceptance.
Competent to explore the most efficient and cost savings options among variety of HVAC system during proposals and/or project execution stage.
Competent to review and check the documents prepared by subordinates or peers. At the same time proving the guidance and training to the subordinates.

2. EQUIPMENT SELECTION

Understanding of various types of HVAC equipment, the overall HVAC system and Plumbing system, eg. Air Cooled Chiller, Water Cooled Chiller, Packaged DX Unit etc. and knowledge of material available in the market for the particular service and equipment , and review of vendor proposes material.
Able to identify the correct equipment based on type and sized, from the available catalogs, vendor input and work with vendor for customised system to suit the project requirement.

3. WORKING DELIVERABLES

Able to prepare effectively in a timely and productive manner

Calculation Notes
Technical data sheet
Job specification /Equipment specification
Material Requisition ( MR /SR )
Technical Clarification
Technical Bid evaluation & recommendation ( TBE /TBT)
Equipment selection study reports
Input to other disciplines’ deliverables such as layout and utility requirements
Weight data and foundation loading input
Equipment interface details
Equipment list input

4. VENDOR DATA REVIEW (VDR)

Expert review on Vendor Data Review to meet Codes and Standards, Local Regulations, project and disciplines requirements
Competent to interface with other disciplines like piping /stress group, process, civil, electrical, structural and instrumentation
Able to understand interface issues with other disciplines, and resolve any conflict

5. SITE SUPERVISION

Understanding sub-contractors/installers Shop drawings.
Able to anticipate effectively to improve delivery/progress of site work.
Review of technical cards for bulk materials.
Review and participate of testing and commissiong works. Including proposing on troubleshooting problems that arise during this works.

6. PERFORM AS HVAC LEAD ENGINEER ROLE

Once assigned as a Lead Engineer, able to provide total commitment to meet project values, monitoring of progress for achieve delivery objective, and execute within appropriate resources
To provide pro-activeness, creativity and efficiency in project execution
Coordinate and plan resources for execution of project.

7. TECHNICAL AUDITS

Ability to carry out technical audits at the Department Manager request (For Senior Engineer more than 10 years experience)
Able to effectively investigate and resolve any quality complaints or incidents raised by any interested parties, or when requested by Client, or project manager.

8. OTHERS

Good professional judgment, responsive and pro-active in execution of HVAC deliverables to meet project needs, and ability to handle difficult situations arise due to complexities of Projects demand
Produce Quality Engineering deliverables / service, meet and presenting any case to Client satisfaction.
Fulfill QA /HSE aspects, with good team-works.
Able to supervise, coach and guide young Engineers.
The front man for proposals involving HVAC scope.

About you:

The Candidate shall possess a Degree in Mechanical Engineering (B.E. Hons). Possess at least minimum 7 years of engineering design experiences in various HVAC System type for Onshore/Offshore application and Industrial Plant and plumbing system.

Be willing to travel and stationed at various Engineering Operating Centers / Client Office on needs basis (for overseas assignment)
Site experiences (1 to 2 years)
Exhibit and maintain good relationship with Client / Peers / Equipment Vendor & suppliers.
Good Professional Check (feedback) from past Employers / Clients.

Your career with us

Working at Technip Energies is an inspiring journey, filled with groundbreaking projects and dynamic collaborations. Surrounded by diverse and talented individuals, you will feel welcomed, respected, and engaged. Enjoy a safe, caring environment where you can spark new ideas, reimagine the future, and lead change. As your career grows, you will benefit from learning opportunities at T.EN University, such as The Future Ready Program, Graduate Program, and from the support of your manager through check-in moments like the Mid-Year Development Review, fostering continuous growth and development.

What’s Next?

Once receiving your system application, our recruiting team will screen and match your skills, experience, and potential team fit against the role requirements. We ask for your patience as the team completes the volume of applications with reasonable timeframe. Check your application progress periodically via personal account from created candidate profile during your application.

We invite you to get to know more about our company by visiting www.ten.comand follow us on LinkedIn, Instagram, Facebook, X and YouTubefor company updates.

#LI-MK1

About the Company

Technip Energies

Engineering and technology solutions for energy

Technip Energies provides engineering, technology, and construction solutions for the energy industry, with two segments: Projects Delivery (engineering, procurement, and construction of onshore and offshore facilities) and Technology, Products and Services (proprietary technologies, equipment, and consulting). It serves oil and gas, petrochemical, and other industrial clients worldwide, delivering technologies, products, and services alongside large-scale projects. The company differentiates itself by an integrated, end-to-end approach that blends technology development with project delivery, a portfolio of proprietary technologies, and a global footprint across Europe, the Americas, Asia-Pacific, and the Middle East & Africa, with emphasis on energy transition topics like LNG, hydrogen, and carbon capture. Its goal is to help customers meet energy needs and transition objectives by providing practical, scalable engineering and technology solutions for complex energy projects.

Company size: 10,001+
Company stage: IPO
Headquarters: Paris, France
Founded: Not listed

Recently Posted Jobs

Explore more opportunities at Technip Energies

See more jobs