B

Brooks Automation

Semiconductor automation and vacuum solutions

Test Engineer 2

Inspection & TestConfirmed live in the last 24 hours
Full-timeJohor, MalaysiaNo salary listed

About the Job

Requirements

  • A bachelor's degree in Electrical, Electronics, Mechatronics Engineering, or a related field is required.
  • Six to eight years of experience in semiconductor capital equipment manufacturing test engineering is required; automated test equipment focus is preferred.
  • Willingness to work three rotating shifts is required.
  • Strong proficiency in automated test equipment test program development and troubleshooting is required.
  • Solid understanding of semiconductor capital equipment manufacturing processes, reliability, and yield improvement is required.
  • Basic knowledge of analog and digital electronics is required.
  • Ability to interpret schematics, wiring diagrams, and test fixture architecture is required.
  • Proficiency in test data analysis and statistical interpretation, including statistical process control, Cp/Cpk, trend analysis, PFMEA/control plans, GR&R/MSA, and correlation/golden unit methods, is required.
  • Understanding of test measurement equipment calibration principles and electrostatic discharge control fundamentals is required.
  • Skilled use of oscilloscopes, digital multimeters, function generators, and other electronic diagnostic tools is required.
  • Familiarity with manufacturing execution systems, test management systems, and revision control tools is required.
  • Proficiency in English communication is required.
  • Ability to train technicians effectively is required.
  • Ability to work independently, manage multiple tasks, and maintain accountability in fast-paced environments is required.
  • Ability to guide or support team initiatives where required is required.
  • Ability to provide regular updates and maintain a professional meeting cadence with management is required.
  • Ability to participate and contribute in department, operational, project team, and review meetings is required.
  • Ability to work in production or operational areas while adhering to safety, EHS, cleanroom, and PPE requirements is required.
  • Ability to perform extended computer or document review, standing and walking, and occasional lifting up to 20 kg with aids is required.
  • May need to extend working hours or support non-working days for critical business needs.
  • Local or international travel may be required based on operational requirements.

Responsibilities

  • Define test strategy, including coverage and risk-based priorities, and industrialize test bay layouts with optimized labor balance, cycle time, and takt alignment to prepare the line for ramp-up.
  • Develop, validate, and implement test plans, sequences, and procedures for burn-in, functional, vacuum, motion/safety interlocks, leak, and software testing, with clear entry and exit criteria.
  • Drive design-for-X and design-for-test requirements and provide feedback to design and firmware teams; maintain the test coverage matrix from new product introduction through high-volume production.
  • Own change control by maintaining revision control and implementing engineering or manufacturing change orders with impact assessment, risk mitigation, and stakeholder sign-off.
  • Establish golden units, correlation methods, and factory/site acceptance testing readiness criteria with Engineering, Quality, and customers as applicable.
  • Operate and optimize automated test equipment, fixtures, and test bays; ensure daily readiness of software images, recipes, interlocks, and safety checks.
  • Lead system-level troubleshooting of test failures and equipment issues; drive rapid containment, root cause analysis, and corrective actions.
  • Provide on-floor technical support and escalation leadership for test technicians and Manufacturing.
  • Ensure readiness of utilities and facilities, including power, pneumatics, vacuum, deionized water, nitrogen, exhaust, and network; maintain test-area 5S and safety.
  • Standardize work instructions and correct selection, connection, and operation of test equipment; manage software images and version control for test stations.
  • Oversee cybersecurity hardening of test PCs, including user access, patching, whitelisting, and removable-media controls, in alignment with IT and InfoSec.
  • Track performance against test engineering KPIs and proactively conduct root cause and corrective action when targets are at risk.
  • Analyze test data for trends, yield, reliability signals, and process drift using statistical process control and Cp/Cpk; publish dashboards and daily or weekly health metrics.
  • Lead or participate in root cause and corrective action, 8D, nonconformance/material review board, and failure analysis for test-related issues; close actions with verified effectiveness.
  • Define and maintain control plans and PFMEA for test processes; keep risks current through changes and production ramps.
  • Establish and maintain operational requirements for test measurement equipment, including calibration, certification, usage controls, and documentation.
  • Ensure test measurement equipment fitness for use through timely calibration, preventive maintenance, inventory management, and status traceability.
  • Quarantine and escalate non-compliant or out-of-tolerance equipment and coordinate its verification.
  • Provide technicians with guidance and work instructions on correct test measurement equipment selection, handling, connection, and operation.
  • Define and implement electrostatic discharge control requirements on the manufacturing floor in alignment with internal and industry standards.
  • Ensure consistent electrostatic discharge practices, including PPE use, grounding methods, and protected-area workstation compliance.
  • Conduct routine electrostatic discharge verifications, support audits, and drive timely closure of related non-conformances.
  • Deliver training and reinforcement on proper electrostatic discharge handling to protect sensitive components.
  • Develop and maintain skills matrices, training plans, and certifications for test technicians and new engineers; verify competence through on-the-job training and qualification boards.
  • Author and maintain concise test procedures, setup instructions, troubleshooting guides, and one-point lessons.
  • Partner with the Manufacturing Engineer to own capital expenditure and expense planning, justification, and submission for line setup, tools, fixtures, test equipment, and infrastructure; track spending against plan.
  • Ensure asset readiness and availability of testers, lifting aids, carts, racks, and ergonomic tools for safe, efficient operations.
  • Source and qualify external vendors for fixtures and test measurement equipment; manage statements of work, acceptance criteria, factory acceptance testing, delivery, and onboarding.
  • Identify and lead continuous-improvement activities to improve workflow, layout, line balance, takt alignment, single-minute exchange of die, work in progress, overall equipment effectiveness, and equipment utilization; quantify benefits.
  • Apply lean tools, including poka-yoke, visual controls, standardized work, and 5S and safety; drive waste reduction and material recovery or reuse.
  • Advance digitalization and automation through workflow simplification, dashboards, and system implementation; benchmark best practices and maintain PFMEA relevance and process-capability growth.
  • Benchmark industry best practices and recommend technologies, equipment upgrades, or process innovations that improve manufacturing performance and sustainability.
  • Comply with company policies, code of conduct, ethical standards, and applicable laws and regulations.
  • Adhere to quality management systems, EHS, data and intellectual-property protection, workplace protocols, and relevant corporate, regulatory, and customer requirements.
  • Support internal and external audits by providing accurate documentation and evidence; close audit findings and observations on time.
  • Perform other duties within the scope of the role, including potential expansion of scope based on business needs.

Desired Qualifications

  • Automated test equipment focus is preferred.
  • Familiarity with data analysis tools such as JMP, Minitab, or Python is preferred.

About the Company

Brooks Automation

Semiconductor automation and vacuum solutions

Brooks Automation provides automation and vacuum solutions for the semiconductor manufacturing industry. It operates in two main product lines: automation (including robotic systems and equipment for wafer handling and transport) and vacuum and instrumentation solutions (products to control and monitor the manufacturing environment). The way its products work is by using robotic systems to move and manage wafers through manufacturing steps, while vacuum systems and instrumentation regulate and observe the process environment to maintain clean, stable conditions and precise process control. The company differentiates itself by delivering integrated, high-performance automation and vacuum solutions that help semiconductor manufacturers boost productivity, improve yields, and reduce manufacturing costs. Brooks Automation’s goal is to enable customers to make their fabrication processes more efficient, reliable, and cost-effective in a global semiconductor market.

Company size
1,001-5,000
Company stage
Not listed
Total funding
$5.6M
Headquarters
Chelmsford, MA
Founded
1978

Recently Posted Jobs

Explore more opportunities at Brooks Automation

See more jobs