Morris-Shea Bridge Co., Inc.

Builds deep foundations for major construction projects

Drill Tender

Building TradesConfirmed live in the last 24 hours

Full-timeUnited StatesNo salary listed

About the Job

Requirements

Knowledge of DeWaal Pile installation procedures.
Good balance, stamina, and physical strength.
Frequently lift, push, and pull up to 50 pounds.
Frequently walk, stoop, kneel, bend, reach, and climb.
Frequently use an acetylene torch, grinder, shovel, and hammer.
Provide steel-toed work boots, a long-sleeve shirt, suitable work pants with no holes, a 25-foot tape measure, a striker, a 12-inch adjustable wrench, and a torch tip cleaner.
Work outdoors in all weather extremes and varied ground conditions, at considerable heights with 100% fall protection measures in place.
Travel to and adapt to job sites in various geographical locations and conditions.

Responsibilities

Assist the drill-rig operator during installation of the DeWaal Pile system.
Position the DeWaal tool and attach the sacrificial endplate.
Rig reinforcing steel and flag.
Troubleshoot and maintain the DeWaal tool.
Operate an acetylene-cutting torch, grinder, and motorized equipment.
Assist in assembling, rigging, and disassembling equipment.
Fuel and grease equipment.
Perform other job duties as assigned.

Field - Drill Tender

Work Location:

The physical location for this position is at any job site, which could be in any state. The ability to travel and adapt to different job sites is essential. Job sites may vary based on project requirements and must be prepared to work in various geographical locations and conditions.

Role: A Drill Tender assist the operator of the drill rig during the installation of our patented DeWaal Pile system. Responsibilities include:

Positioning the DeWaal tool and attaching the sacrificial endplate
Rigging reinforcing steel and flagging
Troubleshooting and maintaining the DeWaal tool
Operating an acetylene-cutting torch, grinder, and motorized equipment
Assisting in the assembly, rigging, and disassembly of equipment
Fueling and greasing equipment
Working at considerable heights above the ground (with 100% fall protection measures in place)
Performing other job duties as assigned

This role requires individuals with knowledge of DeWaal Pile installation procedures, good balance, stamina, and physical strength. The work environment is exclusively outdoors, exposing workers to all weather extremes and varied ground conditions.

Position Requirements:

Frequently lifting, pushing, and pulling up to 50 pounds
Frequently walking, stooping, kneeling, bending, reaching, and climbing
Frequent use of an acetylene torch, grinder, shovel, hammer, etc.

Tools to Be Furnished by Employee:

Steel-toed work boots
Long sleeve shirt
Suitable work pants with no holes
25-foot tape measure
Striker
12-inch adjustable wrench
Torch tip cleaner

Items Furnished by the Company:

Hard hat
Work gloves
Safety glasses
Safety vest
Hearing protection
Fall protection

About the Company

Morris-Shea Bridge Co., Inc.

Builds deep foundations for major construction projects

Morris-Shea builds deep foundations for commercial buildings, infrastructure and industrial facilities, creating the underground supports that carry heavy structures. Its crews install concrete and steel piles using methods selected for the ground conditions and loads at each project. The company combines foundation design with installation, and its DeWaal system displaces soil to reduce vibration and the volume of excavated material. It also drills closed-loop geothermal heating and cooling systems for commercial and institutional buildings, earning revenue through contracted construction work. Founded in 1969, Morris-Shea is headquartered in Irondale, Alabama.

Company size: 201-500
Company stage: Not listed
Total funding: Not listed
Headquarters: Irondale, AL
Founded: 1969

Recently Posted Jobs

Explore more opportunities at Morris-Shea Bridge Co., Inc.

See more jobs