True Anomaly

Builds spacecraft and software for space defense

Electrical Engineer - Senior-Staff, EGSE

Electrical EngineeringConfirmed live in the last 24 hours

Full-time

About the Job

Requirements

A B.S. in Mechanical, Electrical, Aerospace Engineering, or a comparable discipline.
Hands-on experience in electrical ground support equipment, test systems, or hardware engineering in aerospace, defense, or adjacent high-reliability industries, with skill equivalent to the engineering level.
Demonstrated experience designing and building harnesses, including crimping, connector inspection, backshell installation, and shielding termination.
Strong proficiency in both mechanical and electrical hardware design, including owning the 3D layout and schematic for the same system.
Rack-level power and data architecture experience, including UPS, lab-grade power supplies, Linux-based control systems, and mixed signal/power environments.
Systematic troubleshooting methodology across power and data systems.
Familiarity with common communication protocols, including Ethernet, RS-232, RS-422, RS-485, CAN, I2C, SPI, and EtherCAT, and supporting their signal integrity, grounding, and shielding.
Proficiency with electrical test equipment, including oscilloscopes, digital multimeters, electronic loads, function generators, and bench power supplies.
The role is fully onsite at the Long Beach, California or Denver office.
The role has physical demands including bending, sitting, lifting, and driving.
To comply with U.S. Government space technology export regulations, applicants must be U.S. citizens, lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Responsibilities

Own end-to-end design and delivery of electrical ground support equipment racks and test enclosures, including mechanical layout, electrical schematics, harness design, and full drawing packages from requirements through first article build and checkout.
Lead harness design and fabrication to MIL-spec standards, including connector selection, shielding strategy, crimp inspection, and backshell installation, and define build quality standards for the broader team.
Establish and enforce rack standardization across programs, including component selection, parts inventory strategy, and procurement approach to maximize build speed and minimize single-point-of-failure dependencies.
Drive signal integrity and power architecture decisions at the rack and enclosure level, including power and data routing, grounding, shielding, and electromagnetic interference mitigation.
Develop hardware-in-the-loop test system architecture and expansion across emulator-based and flight hardware configurations.
Provide hands-on technical support during test campaigns and bring-up activities, including on-site support at production and test facilities.
Mentor mid-level engineers and technicians, serving as a technical backstop and escalation point for the team.
Develop and maintain documentation for all ground support equipment designs, processes, and changes to ensure traceability and reduce team dependency on any single individual.

Desired Qualifications

Aerospace or startup experience; both are preferred.
Experience designing or supporting hardware-in-the-loop test systems.
Mechanical or Electrical CAD experience, such as SolidWorks or Altium, including rack layout and schematic capture.
PCB design exposure and understanding of layout principles as they relate to signal integrity.
Test software familiarity, such as Python or C++, sufficient to collaborate effectively with software engineers.
PCB and harness rework experience.

Space is a warfighting domain. True Anomaly seeks those with the talent and ambition to build the technology that secures it.

OUR MISSION

True Anomaly delivers decisive capabilities for space superiority. We build autonomous spacecraft, advanced payloads, mission software, and space-based interceptors — enabling the U.S. and its Allies to secure the space environment and counter threats from the ultimate high ground.

OUR VALUES

Be the offset.We create asymmetric advantages with creativity and ingenuity.
What would it take? We challenge assumptions to deliver ambitious results.
It’s the people. Our team is our competitive advantage and we are better together.

BENEFITS & PERKS*

Best-in-class healthcare: 100% company-paid medical, dental, and vision coverage for you and your dependents, with HSA/HRA options
Generous time off: Flexible Time Off (FTO) for exempt employees, accrued PTO of up to 25 days for non-exempt employees, plus 12 paid holidays; Parental Leave; Sick Leave
Fuel for your day: Daily catered lunch and unlimited snacks for in-office employees
And more: 401(k) retirement plan, fitness reimbursement, and Dog Fridays
Equity participation: Equity is included as part of our total compensation package, giving you an opportunity to share in the company’s success.

*Do not apply to fixed term and temporary roles

YOUR MISSION

Lead the design, development, and delivery of electrical ground support equipment across a program portfolio, setting the technical standard for how we build, scale, and sustain our test infrastructure. You will own rack and enclosure systems from concept through first article, drive standardization across the EGSE portfolio, and serve as a technical anchor for a growing team of engineers and technicians.

RESPONSIBILITIES

Own end-to-end design and delivery of EGSE racks and test enclosures — mechanical layout, electrical schematics, harness design, and full drawing packages from requirements through first article build and check-out

Lead harness design and fabrication to MIL-spec standards, including connector selection, shielding strategy, crimp inspection, and backshell installation, and define build quality standards for the broader team

Establish and enforce rack standardization across programs — component selection, parts inventory strategy, and procurement approach to maximize build speed and minimize single-point-of-failure dependencies

Drive signal integrity and power architecture decisions at the rack and enclosure level, including power and data routing, grounding, shielding, and EMI mitigation

Develop hardware-in-the-loop (HIL) test system architecture and expansion across both emulator-based and flight hardware configurations

Provide hands-on technical support during test campaigns and bring-up activities, including on-site support at production and test facilities

Mentor mid-level engineers and technicians, serving as a technical backstop and escalation point for the team

Develop and maintain thorough documentation for all GSE designs, processes, and changes to ensure traceability and reduce team dependency on any single individual

BASIC QUALIFICATIONS

B.S. in Mechanical, Electrical, Aerospace Engineering, or comparable discipline

Hands-on experience in EGSE, test systems, or hardware engineering in aerospace, defense, or adjacent high-reliability industries and skill equivalent to engineering level

Demonstrated experience designing and building harnesses, including crimping, connector inspection, backshell installation, and shielding termination

Strong proficiency in both mechanical and electrical hardware design — comfortable owning the 3D layout and the schematic for the same system

Rack-level power and data architecture experience — UPS, lab-grade power supplies, Linux-based control systems, and mixed signal/power environments

Systematic troubleshooting methodology across power and data systems

Familiarity with common communication protocols (e.g. Ethernet, RS-232, RS-422, RS-485, CAN, I2C, SPI, EtherCAT) and how to support their signal integrity, grounding, and shielding

Proficiency with electrical test equipment including oscilloscopes, DMMs, electronic loads, function generators, and bench power supplies

PREFERRED QUALIFICATIONS

Aerospace or startup experience — both preferred

Experience designing or supporting hardware-in-the-loop (HIL) test systems

Mechanical or Electrical CAD experience (e.g. SolidWorks, Altium) including rack layout and schematic capture

PCB design exposure and understanding of layout principles as they relate to signal integrity

Test software familiarity (e.g. Python, C++) sufficient to collaborate effectively with software engineers

PCB and harness rework experience

COMPENSATION

Base Salary:
- Senior Engineer: $150,000-$220,000
- Staff Engineer: $160,000-$250,000

Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave
Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience.
ADDITIONAL REQUIREMENTS
Work Location—this a fully onsite position based out of our Long Beach, CA or Denver office.
Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.
This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

True Anomaly is committed to equal employment opportunity on any basis protected by applicable state and federal laws. If you have a disability or additional need that requires accommodation, please do not hesitate to let us know.

To protect candidates and our company from application fraud and impersonation, we use third-party tools to verify applicant identity and detect fraudulent applications. Learn more in our Privacy Notice.

About the Company

True Anomaly

Builds spacecraft and software for space defense

True Anomaly builds spacecraft and mission software for US and allied defense organizations operating in space. Its Jackal autonomous orbital vehicle carries sensors that detect, track and image other spacecraft, then maneuvers to perform rendezvous and proximity operations. Operators use Mosaic to plan missions, simulate maneuvers, send commands and review data from satellites and ground systems while retaining control over autonomous actions. The company develops and manufactures its hardware in the United States and supplies spacecraft, payloads and software through defense programs and contracts. True Anomaly was founded in 2022 and is headquartered in Centennial, Colorado.

Company size: 201-500
Company stage: Series D
Total funding: $1B
Headquarters: Centennial, CO
Founded: 2022

Recently Posted Jobs

Explore more opportunities at True Anomaly

See more jobs