Atomic Machines

Develops atomically precise MEMS fabrication machines

Senior Electrical Integration Engineer - Electromechanical & Cabling Focus

Electrical EngineeringConfirmed live in the last 24 hours

Full-timeEmeryville, CA, USAIn-person

About the Job

Requirements

At least 5 years of relevant engineering experience, or equivalent substantial hands-on experience.
Experience building, bringing up, or troubleshooting electromechanical hardware.
Experience crimping cables.
Ability to read schematics, block diagrams, pinouts, interface documents, and component datasheets.
Experience integrating and bringing up sensors, actuators, electronics, and wiring within an electromechanical module or machine.
Experience troubleshooting issues across electronics, wiring, sensors, actuators, and firmware using schematics, datasheets, and common lab equipment such as oscilloscopes, logic analyzers, and multimeters.
Experience creating and maintaining electrical integration documentation, including interface control documents, interconnect diagrams, cable drawings, pin tables, and work instructions.
Hands-on experience building, modifying, and testing prototype wiring, cable assemblies, fixtures, or electromechanical hardware.
Strong documentation and cross-functional communication skills.
A bachelor's degree in Electrical Engineering, Computer Engineering, Mechanical Engineering, Mechatronics, or a related field; alternatively, an associate's degree, a trade/technical program, or equivalent hands-on experience.

Responsibilities

Select and integrate sensors, actuators, third-party electronics, power components, cables, connectors, and communication interfaces.
Design and build prototype interconnects, fixtures, and subsystem test setups.
Collaborate with mechanical engineers on packaging, routing, retention, access, serviceability, and assembly strategy.
Troubleshoot issues spanning electronics, wiring, firmware, configuration, and mechanical behavior.
Create and maintain interface control documents, interconnect and cable drawings, work instructions, and bring-up procedures.
Own electrical integration of electromechanical modules and subsystems, from selecting and interfacing sensors, actuators, and third-party electronics through first-article build, bring-up, validation, and documentation.
Perform interconnect design, prototype implementation, fixture development, physical integration and packaging, and troubleshooting across electronics, wiring, firmware, and mechanisms.
Work closely with electrical, mechanical, embedded systems, and manufacturing engineers to turn early prototypes into reliable, repeatable, and serviceable designs.

Desired Qualifications

Experience with robotics, automation equipment, scientific instruments, or other complex electromechanical systems.
Familiarity with motor control, grounding, shielding, electromagnetic interference, or electrostatic discharge.
Experience working with cable vendors, electronics vendors, or contract manufacturers.

Atomic Machines is building the Matter Compiler™, the first in a new class of AI-native, all-digital manufacturing systems that build working machines directly from code. The Matter Compiler (MC) is aimed at micro-machines: motors and gears the size of a grain of sand, robots small enough to work inside the body, cooling built directly into the chips that run AI, and the many devices like them that have been waiting on a way to build them. Its first product is PrimeSwitch™, an electromechanical power relay the size of a button battery that carries 150 amps continuous current and opens in 50 microseconds, about a thousand times faster than a conventional contactor. Founded by Jeff Holden — serial entrepreneur, ex-Amazon SVP and Uber’s first Chief Product Officer — the company has raised $250 million to date.

Atomic Machines is based in the San Francisco Bay Area, with offices in Emeryville and Santa Clara.

About The Role:

Atomic Machines is hiring Electrical Integration Engineers (Electromechanical Focus) to design, build, document, and troubleshoot the electrical systems used in our custom manufacturing equipment.

You will own the electrical integration of electromechanical modules and subsystems, from selecting and interfacing sensors, actuators, and third-party electronics through first-article build, bring-up, validation, and documentation. Interconnect design is an important part of the work, alongside prototype implementation, fixture development, physical integration and packaging, and troubleshooting across electronics, wiring, firmware, and mechanisms. You will work closely with electrical, mechanical, embedded systems, and manufacturing engineers to turn early prototypes into reliable, repeatable, and serviceable designs.

What You’ll Do:

Select and integrate sensors, actuators, third-party electronics, power components, cables, connectors, and communication interfaces.
Design and build prototype interconnects, fixtures, and subsystem test setups.
Collaborate with mechanical engineers on packaging, routing, retention, access, serviceability, and assembly strategy.
Troubleshoot issues spanning electronics, wiring, firmware, configuration, and mechanical behavior.
Create and maintain ICDs, interconnect and cable drawings, work instructions, and bring-up procedures.

What You’ll Need:

5+ years of relevant engineering experience, or equivalent substantial hands-on experience.
Experience building, bringing up, or troubleshooting electromechanical hardware.
Experience with crimping cables
Ability to read schematics, block diagrams, pinouts, interface documents, and component datasheets.
Experience integrating and bringing up sensors, actuators, electronics, and wiring within an electromechanical module or machine.
Experience troubleshooting issues across electronics, wiring, sensors, actuators, and firmware using schematics, datasheets, and common lab equipment (oscilloscopes, logic analyzer, multimeters, etc)
Experience creating and maintaining electrical integration documentation, including ICDs, interconnect diagrams, cable drawings, pin tables, and work instructions.
Hands-on experience building, modifying, and testing prototype wiring, cable assemblies, fixtures, or electromechanical hardware.
Strong documentation and cross-functional communication skills.
A bachelor's degree in Electrical Engineering, Computer Engineering, Mechanical Engineering, Mechatronics, or a related field (associate's, bachelor's, or trade/technical program), or equivalent hands-on experience.

Bonus Points For:

Experience with robotics, automation equipment, scientific instruments, or other complex electromechanical systems.
Familiarity with motor control, grounding, shielding, EMI, or ESD.
Experience working with cable vendors, electronics vendors, or contract manufacturers.

The compensation for this position also includes equity and benefits.

Salary Range

$165,000—$205,000 USD

Atomic Machines is an equal opportunity employer that values diversity and does not discriminate based on characteristics protected by applicable law. We are committed to an inclusive interview experience, including for individuals with disabilities. To request an accommodation, contact [email protected]. To help our recruiting team manage application volume and respond to candidates more efficiently, Atomic Machines may use AI-assisted tools.

Salary Range 165000 - 205000 USD

About the Company

Atomic Machines

Develops atomically precise MEMS fabrication machines

Atomic Machines designs and ships fabrication systems aimed at atomically precise manufacturing (APM), starting with MEMS microfabrication. Its machines turn digital designs directly into physical objects at the atomic level, enabling extremely small and precise devices. The core product is a fabrication system that combines specialized hardware with control software and ongoing maintenance services, sold to semiconductor, automotive, healthcare, and consumer electronics manufacturers who need higher precision, efficiency, and scalability in their manufacturing. Unlike traditional MEMS fabrication that relies on silicon-based processes, Atomic Machines pursues a direct atom-by-atom construction path to improve performance and yield, and it offers custom fabrication solutions for large-scale or specialized needs. The company’s goal is to raise the bar for precision and manufacturing efficiency by making atomically precise production practical and scalable across multiple industries.

Company size: 201-500
Company stage: Seed
Total funding: Not listed
Headquarters: Emeryville, CA
Founded: 2019

Recently Posted Jobs

Explore more opportunities at Atomic Machines

See more jobs