Botsync

Autonomous mobile robots plus syncOS software

Robotics Hardware Engineer 3

Power Systems EngineeringConfirmed live in the last 24 hours

Full-timeBengaluru, Karnataka, IndiaNo salary listedIn-person

About the Job

Requirements

The candidate must have 5–8 years of experience in robotics, mechatronics, or related fields.
The candidate must have a bachelor's or master's degree in Electronics, Electrical Engineering, or a comparable discipline.
The candidate must have deep expertise in motor control for DC motors, brushless/BLDC motors, and servo systems, including driver circuit design, current sensing, and closed-loop control at the hardware level.
The candidate must have power electronics design experience with DC-DC converters, motor drivers, battery management systems, power distribution architecture, and protection circuits for overcurrent, overvoltage, and thermal conditions.
The candidate must have embedded C/C++ experience implementing motor control and power management firmware on microcontrollers such as ARM Cortex-M, STM32, or similar.
The candidate must be comfortable authoring and reading power-electronics PCB schematics, including layout considerations for thermal management and high-current traces.
The candidate must be skilled in using lab equipment such as oscilloscopes, logic analyzers, power supplies, clamp meters, and multimeters.
The candidate must have prior senior-level experience owning a power or actuation subsystem end-to-end, from concept through production.

Responsibilities

Design, develop, and validate power distribution, motor drive, and actuation systems for the AMR platforms during customer-specific adoption projects.
Own architecture decisions for power systems and actuation subsystems, including motor drivers, power distribution, and battery/BMS interfaces, across AMR products.
Design and validate power-electronics PCBs, including motor drivers, power distribution boards, and battery interface boards, integrated into AMRs deployed across industrial environments.
Analyze and author PCB schematics for power and actuation subsystems, ensuring electrical design aligns with system-level requirements.
Diagnose and resolve issues at both the power-electronics and firmware levels during lab validation, pilot runs, and field deployments.
Design and implement test tools and validation strategies to streamline manufacturing and ensure hardware quality.
Investigate and close issues arising during AMR production, focusing on repeatability and long-term reliability.
Document power and actuation system designs using flowcharts, state diagrams, logic breakdowns, and structured test results.
Set technical direction for power systems and actuation architecture across current and future AMR platforms.
Mentor and provide technical guidance to junior hardware engineers on power-electronics and actuation design.
Own component selection, vendor evaluation, and design-for-manufacturing decisions for power and actuation subsystems.

Desired Qualifications

Hands-on knowledge of CANBus, Modbus RTU/TCP, RS485/RS232, and other industrial communication protocols, including UART, SPI, I2C, and Ethernet, for actuator and system communication.
Working knowledge of ROS 1 or ROS 2.
Exposure to robotics safety standards ISO 13849 and ISO 3691.
Experience with version control systems such as Git.
Basic understanding of TCP/IP and UDP networking concepts.

Robotics Hardware Engineer - III

Botsync · Bengaluru, India · Full-time · Posted 2026-09-19

Workplace: on_site

Department: Engineering

Description

Asia’s leading robotics solutions provider, automating enterprise supply chains since 2017. We build syncOS — the

industry-first no-code platform that lets manufacturers and warehouse operators integrate, reprogram, and scale

automation systems without halting production or calling in specialists. Our autonomous mobile robots (AMRs) run

24/7 for global brands — transforming production lines in hours, not weeks.

As Botsync scales its AMR fleet across more demanding industrial environments, this L3 role owns the power systems and

actuation architecture that keep every robot running reliably — from motor drive electronics to battery and power

distribution design.
**
The key responsibilities include:

Power and actuation system design**

Design, develop, and validate power distribution, motor drive, and actuation systems for Botsync’s AMR platforms during customer-specific adoption projects
Own architecture decisions for power systems and actuation subsystems (motor drivers, power distribution, battery/BMS interfaces) across Botsync AMR products
Design and validate power electronics PCBs (motor drivers, power distribution boards, battery interface boards) integrated into AMRs deployed across various industrial environments
Analyze and author PCB schematics for power and actuation subsystems, ensuring electrical design aligns with system-level requirements

Validation, testing and production support

Diagnose and resolve issues at both the power electronics and firmware levels during lab validation, pilot runs, and field deployments
Design and implement test tools and validation strategies to streamline manufacturing and ensure hardware quality
Investigate and close issues arising during AMR production, with a focus on repeatability and long-term reliability
Document power and actuation system designs using flowcharts, state diagrams, logic breakdowns, and structured test results

Technical leadership
Set technical direction for power systems and actuation architecture across current and future AMR platforms
Mentor and provide technical guidance to junior hardware engineers on power electronics and actuation design
Own component selection, vendor evaluation, and design-for-manufacturing decisions for power and actuation subsystems

Requirements

Essential

5 - 8 years of experience in robotics, mechatronics, or related fields
Bachelor’s or Master’s degree in Electronics, Electrical Engineering, or a comparable discipline
Deep expertise in motor control (DC motors, brushless/BLDC motors, servo systems) — driver circuit design, current sensing, and closed-loop control at the hardware level
Power electronics design experience: DC-DC converters, motor drivers, battery management systems (BMS), power distribution architecture, and protection circuits (overcurrent, overvoltage, thermal)
Embedded C/C++ experience for implementing motor control and power management firmware on microcontrollers (ARM Cortex-M, STM32, or similar)
Comfortable authoring and reading PCB schematics for power electronics, including layout considerations for thermal management and high-current traces
Skilled at using lab equipment such as oscilloscopes, logic analyzers, power supplies, clamp meters, and multimeters
Prior experience owning a power or actuation subsystem end-to-end, from concept through production, at a senior level

Highly desirable
Hands-on knowledge of CANBus, Modbus RTU/TCP, RS485/RS232, and other industrial communication protocols (UART, SPI, I2C, Ethernet) for actuator and system communication
Working knowledge of ROS 1 or ROS 2
Exposure to robotics safety standards (ISO 13849, ISO 3691)
Experience with version control systems like Git
Basic understanding of TCP/IP and UDP networking concepts

Benefits

Competitive salary
Comprehensive health benefits package
Hustle of a young startup, always something to do and something to improve
Opportunities for professional development and growth into management roles
Collaborative and inclusive work environment

Apply

Apply at Botsync

About the Company

Botsync

Autonomous mobile robots plus syncOS software

Botsync provides autonomous mobile robots (AMRs) and an integrated software layer to automate material handling in factories and warehouses. The AMRs move heavy loads and execute tasks in manufacturing and logistics, guided by sensors and mapping, while syncOS coordinates fleets, routes tasks, and lets customers customize automation rules. The company distinguishes itself with heavy‑duty AMRs paired with an integrated fleet-management OS that supports enterprise-scale deployment, especially in Asia, delivering a full hardware-plus-software package. Its goal is to help enterprises replace manual workflows with automated processes to reduce costs, improve throughput, and enhance workplace safety.

Company size: 51-200
Company stage: Series A
Total funding: $7.4M
Headquarters: Singapore, Singapore
Founded: 2017

Recently Posted Jobs

Explore more opportunities at Botsync

See more jobs