K

Kinder Morgan

Energy transportation via pipelines and terminals

Plant Engineer - Liquefied Natural Gas, Renewable Natural Gas

Mechanical Maintenance and Reliability EngineeringConfirmed live in the last 24 hours
Full-timeIndianapolis, IN, USANo salary listed

About the Job

Requirements

  • A Bachelor of Science degree in Chemical, petroleum, or natural gas engineering from an accredited college or university is required; related degrees with on-the-job experience may be considered.
  • Provides engineering support to the operations of renewable natural gas and liquefied natural gas processing plants.
  • Leads daily optimization of processed gas volume, quality, and facility reliability to maximize energy recovery and improve performance and revenue, using data and available resources.
  • Provides guidance, recommendations, and direction to renewable natural gas and liquefied natural gas operators, technicians, and managers on plant design, construction, and operational issues.
  • Operational experience and knowledge of natural gas processing facilities and equipment.
  • Experience with design and optimization of both new and existing gas processing facilities.
  • Ability to interface with personnel across varied disciplines, backgrounds, and experience levels and to work with project management, business development, operations, contractors, suppliers, and other internal and external groups.
  • Ability to troubleshoot and solve problems.
  • Ability to perform detailed sizing, design, and specification of major gas-processing equipment, including compression, heat exchangers, membranes, pumps, towers, separators, heaters, control valves, and pressure safety valves.
  • Participate in baseline, revalidation, and project process hazard analysis and hazard and operability studies for new and existing facilities, and assist with management-of-change requirements.
  • Perform or validate relief-valve and flare-system sizing and evaluations.
  • Maintain and update process safety information, including piping and instrumentation diagrams, heat and material balances, process simulations, process flow diagrams, cause-and-effect matrices, consequences of deviation, pressure relief valve calculations, and maximum intended inventory.
  • Functional knowledge and understanding of ASME B31.3, ASME Section VII Division 1, API 520/521, and other recognized and generally accepted good engineering practices and regulations related to process-facility design, construction, and operation.
  • Thorough understanding of most of the following midstream processes: glycol dehydration; solid desiccant dehydration; compression; closed-loop chiller systems; acid gas removal systems such as amine and Selexol; pressure swing adsorption; temperature swing adsorption; cryogenic liquefaction nitrogen rejection; product storage, transfer, loading, and unloading; and utility systems such as heat medium, flare, regenerative thermal oxidizer, fuel gas, steam, and instrument air.
  • Ability to review and provide feedback on equipment drawings, vessel calculations, and construction drawings.
  • Ability to assist environmental, health, and safety staff with environmental permit requirements, including air emissions, storage, and proper waste disposal.
  • Knowledge and experience managing projects.
  • Ability to develop, read, and interpret mechanical blueprints and diagrams.
  • Working knowledge of Microsoft Office software applications.
  • Strong presentation and report-writing skills.
  • Must possess and maintain a valid driver's license and a driving record satisfactory to the company and its insurers.
  • Business travel is required and expected to be 30% to 50% of the time.
  • Must carry a cell phone and respond as needed during working and non-working hours.
  • Must be able to walk stairs and ladders, negotiate uneven surfaces, and work on oil storage tanks and catwalks.
  • Must be physically capable of completing and satisfying training requirements stipulated by local, state, or federal agencies or company policy.
  • Must carry a communications device and be willing and able to support operations 24 hours per day in case of emergencies.
  • Must be willing and able to travel throughout the United States; extensive travel may include overnight stays for several days.
  • Field activities may involve walking at work or construction sites, climbing in and out of storage tanks, working around heavy equipment, negotiating rough terrain including loose rock, and working in confined spaces.

Responsibilities

  • Advocate and provide leadership for process and operations safety at the liquefied natural gas and renewable natural gas facilities.
  • Review and contribute to commissioning and start-up activities.
  • Modify and maintain piping and instrumentation diagrams and other process-related documents.
  • Support operational issue resolution and provide technical support for the facility.
  • Lead initiatives to improve efficiency, optimize units, and debottleneck equipment.
  • Conduct proactive monitoring and troubleshooting of assigned process equipment.
  • Report production deficiencies and monitoring results in a timely manner.
  • Develop solutions to improve reliability and production.
  • Provide technical review of management-of-change documents and operations procedures.
  • Provide support and information for development and maintenance of the process simulator.
  • Review equipment issues, identify process engineering improvements, perform root-cause and equipment-failure analyses, plan maintenance projects, optimize production and reliability, manage spare-parts inventory, and perform other project-management duties.
  • Ensure facility changes are scoped, designed, and constructed in accordance with applicable company, industry, and regulatory standards.
  • Maintain a high regard for personal, colleague, and public safety and for safe operation of company assets.

Desired Qualifications

  • A minimum of 5 years of experience in design, construction, and/or operation of natural gas processing facilities and/or landfill gas processing facilities.
  • Fundamental knowledge of natural gas processing and renewable natural gas and liquefied natural gas processing.
  • Practical experience and knowledge of industry codes, including B31.3/31.8, Department of Transportation Code of Federal Regulations 49 Parts 191/192, ASME, ANSI, OSHA, API, and NACE.
  • Proficiency with process modeling applications such as BR&E ProMax, Aspen HYSYS, Aspen Flare System Analyzer, and Aspen Exchanger Design and Rating.
  • Experience with process-facility instrumentation, controls, and automation.
  • Experience in field or plant operations.

About the Company

Kinder Morgan

Energy transportation via pipelines and terminals

Kinder Morgan runs a large energy infrastructure network of about 79,000 miles of pipelines and 139 terminals to transport and store natural gas, refined petroleum products, crude oil, condensate, chemicals, and CO2. Its four segments—Natural Gas Pipelines, Products Pipelines, Terminals, and CO2—provide fee-based transportation and storage services across an integrated system. Its scale and multi-product network, along with a long-term fee-based revenue model, set it apart from competitors, and it is expanding into the energy transition with investments in renewable natural gas (RNG) and carbon capture, utilization, and sequestration (CCUS). The goal is to reliably move and store energy for customers while growing RNG and CCUS capabilities to support lower-emission energy solutions and future growth.

Company size
5,001-10,000
Company stage
IPO
Headquarters
Houston, TX
Founded
1997

Recently Posted Jobs

Explore more opportunities at Kinder Morgan

See more jobs