Granite State Manufacturing

Manufactures precision components for naval submarines

Weld Supervisor

Welding & Metal FabricationConfirmed live in the last 24 hours

Full-timeManchester, NH, USANo salary listedIn-person

About the Job

Requirements

A high school diploma or equivalent is required.
A minimum of 5 years of welding experience is required.
Knowledge of welding processes such as Gas Tungsten Arc Welding, Gas Metal Arc Welding, Flux-Cored Arc Welding, and related fabrication methods.
Understanding of weld symbols, blueprints, and fabrication drawings.
Understanding of quality systems and documentation requirements.
Strong leadership, communication, and interpersonal skills.
Ability to manage multiple priorities in a fast-paced environment.
Problem-solving and decision-making capability.
Ability to motivate and develop employees.
Strong organizational and planning skills.

Responsibilities

Direct welders and support staff; assign work, monitor productivity, and drive accountability based on priorities, schedules, and resource availability.
Monitor productivity, labor utilization, and workflow status to meet production targets.
Manage bottlenecks, capacity planning, and work prioritization in alignment with Production Control.
Promote company values, safety culture, and teamwork by leading by example.
Conduct shift start meetings, communicate expectations, and reinforce accountability.
Coach, mentor, and develop employees to improve skills and performance.
Participate in performance evaluations and disciplinary processes as needed; support hiring and training.
Reduce and eliminate barriers and obstacles to improve cost and scheduling performance.
Ensure welding is performed using approved procedures, drawings, travelers, and work instructions.
Own weld department throughput and schedule adherence to support on-time delivery.
Identify and remove production barriers to maintain throughput.
Proactively escalate constraints, delays, or risks.
Support overtime planning and staffing adjustments as needed to meet commitments.
Ensure compliance with welding procedures, qualifications, and applicable codes and standards.
Maintain compliance with NAVSEA, customer, and internal quality requirements where applicable.
Coordinate with Quality Assurance on inspections, documentation, and corrective actions.
Support investigations related to nonconformances, corrective actions, and root cause analysis.
Ensure proper traceability, documentation completion, and record integrity.
Promote and enforce safe work practices and compliance with OSHA and company safety requirements.
Ensure welding equipment, materials, and work areas are maintained in safe condition.
Participate in safety audits, hazard identification, and corrective actions.
Support Lean, 5S, and continuous improvement initiatives.
Identify opportunities to improve efficiency, quality, and workflow.
Participate in operational improvement projects and process development.
Use data and metrics to drive performance improvements.
Coordinate with Engineering regarding router integrity, technical questions, weld procedures, and process improvements.
Coordinate with Quality, Planning, and Program Management to ensure program success.
Partner with Engineering and Quality on process improvement and new product introduction.
Communicate status, risks, and priorities effectively to leadership.
Ensure accurate labor charging and time reporting within the enterprise resource planning system.
Maintain departmental documentation and records.
Use production data to monitor performance against safety, quality, delivery, and cost goals.
Ensure compliance with applicable NAVSEA requirements, including 1688, TP-278, and TP-271.
Maintain weld traceability and support documentation control requirements.
Coordinate in-house visual testing, liquid penetrant testing, and magnetic particle testing; support outsourced radiographic testing and ultrasonic testing activities.
Maintain weld continuity and support audit readiness activities.
Own 5S discipline and workplace organization within the weld area.
Develop and maintain welder certification matrices.
Follow company policies, wear safety glasses in designated areas, maintain a neat and orderly work area, and follow safety practices to prevent errors.
Establish effective working relationships with managers, directors, and workers and collaborate to accomplish shared purposes and goals.
Abide by the company Code of Ethics and Business Conduct and observe applicable U.S. and foreign laws and regulations.

Desired Qualifications

Technical training or certification in welding is preferred.
Previous supervisory or leadership experience is preferred.
Experience in a defense, aerospace, or regulated manufacturing environment is strongly preferred.
Familiarity with welding codes and standards such as AWS, NAVSEA, ASME, or similar is preferred.
Experience with an enterprise resource planning or manufacturing system is preferred.

Weld Supervisor

Granite State Manufacturing · Manchester, United States · Full-time · Posted 2026-08-24

Workplace: on_site

Department: Welding

Description

Granite State Manufacturing is a leading contract manufacturer of large, complex, precision machined and welded components, supporting the US Navy in building submarines.

We specialize in high-mix, low-to-medium volume production, delivering precision, quality, and on-time performance on custom-engineered products. Our capabilities include:

Large-format CNC machining
Heavy fabrication and welding (MIG, TIG, FCAW, SAW)
Assembly, inspection, and testing
Program management for complex builds

We are known for handling tight tolerances, complex geometries, and demanding customer specifications.

Our work environment is supportive, providing what our people need to do great work.

POSITION SUMMARY

The Weld Supervisor is responsible for the daily leadership, coordination, and execution of welding operations to ensure safe, compliant, and efficient production in support of Granite State Manufacturing (GSM) programs. This role provides direct supervision of weld personnel, manages workflow execution, and ensures adherence to applicable customer, regulatory, and internal quality requirements including NAVSEA, defense, and aerospace standards where applicable.

ESSENTIAL FUNCTIONS AND RESPONSIBILITIES

Leadership and Supervision

Directs welders and support staff; assigns work, monitors productivity, and drives accountability based on priorities, schedules, and resource availability.
Monitor productivity, labor utilization, and workflow status to meet production targets.
Actively manages bottlenecks, capacity planning, and work prioritization in alignment with Production Control.
Lead by example in promoting GSM values, safety culture, and teamwork.
Conduct shift start meetings, communicate expectations, and reinforce accountability.
Coach, mentor, and develop employees to improve skills and performance.
Participates in performance evaluations and disciplinary processes as needed; supports hiring and training.
Your leadership is expected to make it easier for employees to make quality products and make it easier for customers to do business with GSM.
Work to reduce and eliminate barriers and obstacles to improve overall cost and scheduling performance.

Production Execution

Ensure welding is performed with approved procedures, drawings, travelers, and work instructions.
Owns weld department throughput and schedule adherence to support on-time delivery.
Identify and remove production barriers to maintain throughput.
Escalate constraints, delays, or risks proactively.
Support overtime planning and staffing adjustments as needed to meet commitments.

Quality and Compliance

Ensure compliance with all welding procedures, qualifications, and applicable codes and standards.
Maintain compliance with NAVSEA, customer, and internal quality requirements where applicable.
Coordinate with Quality Assurance for inspections, documentation, and corrective actions.
Support investigations related to nonconformances, corrective actions, and root cause analysis.
Ensure proper traceability, documentation completion, and record integrity.

Safety and Environmental

Promote and enforce safe work practices and compliance with OSHA and company safety requirements.
Ensure welding equipment, materials, and work areas are maintained in safe condition.
Participate in safety audits, hazard identification, and corrective actions.

Continuous Improvement

Support Lean, 5S, and continuous improvement initiatives.
Identify opportunities to improve efficiency, quality, and workflow.
Participate in operational improvement projects and process development.
Utilize data and metrics to drive performance improvements.

Cross-Functional Collaboration

Coordinate with Engineering regarding router integrity, technical questions, weld procedures, and process improvements.
Coordinates with Quality, Planning, and Program Management to ensure program success.
Partners with Engineering and Quality on process improvement and new product introduction.
Communicate status, risks, and priorities effectively to leadership.

Administrative Responsibilities

Ensuring accurate labor charging and time reporting within ERP.
Maintain departmental documentation and records.
Using production data to monitor performance against safety, quality, delivery, and cost goals.
Ensures compliance with NAVSEA requirements including 1688, TP-278, and TP-271 where applicable.
Maintains weld traceability and supports documentation control requirements.
Coordinates in-house VT, PT, and MT and supports outsourced RT and UT activities.
Maintains weld continuity and supports audit readiness activities.
Owns 5S discipline and workplace organization within the weld area.
Develops and maintains welder certification matrices.
Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by: being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors.
Demonstrates commitment to teamwork by establishing effective relationships and networks with both managers/directors and workers and collaborating with them to accomplish shared purposes and goals.
Abides by GSM Code of Ethics and Business Conduct standards and strictly observes all U.S. and foreign laws and regulations.

Requirements

QUALIFICATIONS, SKILLS, AND ABILITIES

High school diploma or equivalent required; technical training or certification in welding preferred.
Minimum 5 years’ welding experience required; previous supervisory or leadership experience preferred.
Experience in defense, aerospace, or regulated manufacturing environment strongly preferred.
Knowledge of welding processes such as GTAW, GMAW, FCAW, and related fabrication methods.
Understanding of weld symbols, blueprints, and fabrication drawings.
Familiarity with welding codes and standards (AWS, NAVSEA, ASME, or similar) preferred.
Understanding of quality systems and documentation requirements.
Experience with ERP or manufacturing systems preferred.
Strong leadership, communication, and interpersonal skills.
Ability to manage multiple priorities in a fast-paced environment.
Problem-solving and decision-making capability.
Ability to motivate and develop employees.
Strong organizational and planning skills.
Granite State Manufacturing (GSM) is an equal opportunity employer. GSM does not discriminate on the basis of race, color, religion, sex, gender, gender identity or expression, pregnancy, national origin, veteran status, age, physical or mental disability, genetic information, marital status, sexual orientation, or any other consideration made unlawful by applicable federal, state, or local laws in its programs, activities, or employment.

EEO STATEMENT

Granite State Manufacturing (GSM) is an equal opportunity employer. GSM does not discriminate on the basis of race, color, religion, sex, gender, gender identity or expression, national origin, citizenship, veteran status, age, physical or mental disability, genetic information, marital status, sexual orientation, or any other consideration made unlawful by applicable federal, state, or local laws in its programs, activities, or employment.

Benefits

Competitive salary
Medical insurance
Dental & Vision, Life insurance (Company paid)
Disability benefits (Company paid)
401(k) & 401(k) company matching
Paid time off and holidays
Flexible spending accounts
Health savings account
Referral program
Overtime opportunities (if applicable)
Training and career growth in advanced manufacturing
Employee assistance program

Why Join Us?

Work on large-scale, one-of-a-kind projects
Stable industry with strong customer demand
Opportunity to grow in a flexible, high-skill environment
Collaborative team focused on quality and craftsmanship

Apply

Apply at Granite State Manufacturing

About the Company

Granite State Manufacturing

Manufactures precision components for naval submarines

Granite State Manufacturing, a family-owned firm in Manchester, New Hampshire, produces precision components and systems for United States Navy submarines. Its work includes computer-controlled machining and welding for complex metal parts used in Virginia-class and Columbia-class vessels. The company supports shipbuilders with custom-engineered equipment made in small production runs, coordinating engineering review and program management. Engineering and production teams work from detailed customer specifications to make parts that meet demanding operational requirements. Founded in 1937, it operates manufacturing facilities in Manchester and Nashua, New Hampshire.

Company size: 51-200
Company stage: Not listed
Total funding: Not listed
Headquarters: Manchester, NH
Founded: 1937

Recently Posted Jobs

Explore more opportunities at Granite State Manufacturing

See more jobs