Bachelor of Engineering in Electrical or Power Systems.
CPEng/NER chartered or eligible, plus RPEQ or state registration where required.
At least 8 years in high-voltage power engineering, including 3+ years on utility-scale BESS, solar, or wind connections in the NEM or equivalent markets.
At least one grid-connected BESS taken through design, commissioning, and GPS compliance.
Experience working with battery OEMs and network service providers.
Strong knowledge of lithium-ion BESS, PCS/inverter control (grid-following and grid-forming), and HV/MV systems from 480 V to 66 kV and above.
Working knowledge of AS 2067, AS/NZS 3000, AS/NZS 7000, AS 1940, AS 3008/IEC 60287, and the National Electricity Rules.
Ability to interpret and review studies in ETAP, PowerFactory, PSS®E, or PSCAD.
Responsibilities
Lead the technical integration of OEM battery enclosures and PCS/inverter units into the balance-of-plant design.
Define and verify the collector system, including the main power transformer, 33 kV switchboards, RMUs, step-up transformers, and LV connections to the PCS.
Confirm equipment ratings against short-circuit, load-flow, and cable/transformer-loading studies, including PCS fault contribution during fault ride-through.
Drive battery yard layouts for maintenance access, fire separation, crane corridors, and AS 2067 clearances.
Support the NER connection process, including Generator Performance Standards and grid-forming capability.
Coordinate power-system studies (load flow, harmonics, reactive capability, and dynamic performance) with OEM-supplied PSS®E and PSCAD models.
Lead safety-in-design for BESS hazards such as thermal runaway, LV arc flash, transformer failure, and fire spread.
Review design packages at 30%, 80%, and IFC, and support procurement with specifications, tender evaluations, and vendor document reviews.
Oversee FAT, site testing, energisation, commissioning, and R2/hold-point testing with the network service provider.
Eagles Engineers (an entity of CoMade) is a strategic partner specialising with in-house design, design management, engineering, procurement, construction, completions and commissioning. We bring together the best engineers locally and from around the world to provide truly end-to-end solutions for our clients that enable them to realise their vision. Our clients can have confidence that what we meticulously design, can be delivered, seamlessly and efficiently.
Eagles Engineer’s vision is to become the foremost project delivery partner recognised for best-in-industry solutions. Strong culture and core values are what separate Eagles Engineers from the competition. They believe in building and setting a reputable culture, recognising and rewarding their people who represent those core values either onsite, with clients, or in the local communities.
About the role:
About this role
We’re looking for a BESS Specialist to be the technical lead on a utility-scale battery energy storage system connected to the high voltage network. In this role you’ll own the integration of battery and power conversion equipment with the MV collector system, HV substation and grid connection, from concept design right through to commissioning and handover. You’ll be the key link between the battery/PCS OEM, our primary and secondary design teams, the network service provider and the construction team. Some of your key accountabilities will include:
Lead the technical integration of OEM battery enclosures and PCS/inverter units into the balance-of-plant design
Define and verify the collector system: main power transformer, 33 kV switchboards, RMUs, step-up transformers and LV connections to the PCS
Confirm equipment ratings against short-circuit, load flow and cable/transformer loading studies, including PCS fault contribution during fault ride-through
Drive battery yard layouts for maintenance access, fire separation, crane corridors and AS 2067 clearances
Support the NER connection process, including Generator Performance Standards and grid-forming capability
Coordinate power system studies (load flow, harmonics, reactive capability, dynamic performance) with OEM-supplied PSS®E and PSCAD models
Lead safety-in-design for BESS hazards such as thermal runaway, LV arc flash, transformer failure and fire spread
Review design packages at 30%, 80% and IFC, and support procurement with specifications, tender evaluations and vendor document reviews
Oversee FAT, site testing, energisation, commissioning and R2/hold-point testing with the network service provider
How you can support CoMade
Bachelor of Engineering (Electrical or Power Systems)
CPEng / NER chartered, or eligible, plus RPEQ or state registration where required
Min 8+ years in HV power engineering, including 3+ years on utility-scale BESS, solar or wind connections in the NEM or equivalent markets
At least one grid-connected BESS taken through design, commissioning and GPS compliance
Experience working with battery OEMs and network service providers
Strong knowledge of lithium-ion BESS, PCS/inverter control (grid-following and grid-forming), and HV/MV systems from 480 V to 66 kV and above
Working knowledge of AS 2067, AS/NZS 3000, AS/NZS 7000, AS 1940, AS 3008/IEC 60287 and the National Electricity Rules
Ability to interpret and review studies in ETAP, PowerFactory, PSS®E or PSCAD
Why join us?
Be part of a growing business where your work directly impacts success
Close-knit, collaborative team environment where your input is valued
Exposure to high-profile, technically complex projects
Mentorship from experienced leaders in your field
Competitive salary aligned with market demand and experience
Flexible working arrangements
Opportunities to shape processes, systems, or team growth
Barista style coffee and fresh fruit always within reach
Offices within 1 minute of public transport
Join us at Eagles Engineers and be part of a dynamic team that is shaping the future of high voltage engineering. We offer competitive compensation packages, opportunities for professional development, and a collaborative work environment where your contributions are valued.