Commercial Metals

Recycling-based steel production and fabrication

Sr Process Controls Technician

Equipment MaintenanceConfirmed live in the last 24 hours

Full-timeMartinsburg, WV, USAIn-person

About the Job

Requirements

A minimum of 2 years of electrical maintenance experience is preferred.
Experience with computerized maintenance management systems is preferred.
Experience troubleshooting programmable logic controllers is preferred.
Knowledge and understanding of grounding systems and maintenance are required.
Demonstrated ability in electrical and mechanical maintenance, hydraulics and pneumatics, and arc-flash safety is required.
Proficiency in electrical relay control maintenance and repair, especially for cranes, is required.
Extensive experience maintaining electrical control and distribution systems and analog and digital circuits is required.
Extensive experience maintaining relay and ladder logic, industrial communications networks, instrumentation, and automation control systems is required.
Experience or formal education and laboratory training on programmable logic controllers, or the ability to navigate block logic, ladder logic, or other digital logic interfaces, is required.
Experience with maintenance, repair, and operations systems and SAP is preferred.
Experience with manufacturing equipment processes and working knowledge of associated controls are required.
Training and/or experience in instrument and sensor calibration is required.
Knowledge of hydraulic and pneumatic circuit components is required.
Experience in a heavy industrial environment is preferred but not required.
Experience with industrial electrical repairs, including troubleshooting and repairing AC/DC drives and motors, programmable logic controllers, and 480-volt three-phase electrical systems, is required.
Specific knowledge of hydraulic and electrical systems and equipment is required.
Safe working habits and compliance with OSHA, EPA, and company safety policies, rules, and regulations are required.
Ability to work overtime and cross-train as required is necessary.
Ability to work outside under all weather conditions, including extreme heat and cold temperatures, is necessary.
A High School Diploma or GED is required.

Responsibilities

Troubleshoot all aspects of medium- and high-voltage equipment for an industrial steel production facility.
Lead the facility's annual testing and inspection requirements.
Diagnose and remedy complex problems related to incoming power irregularities and substation problems.
Diagnose and remedy complex problems related to transformer protection relays, complex faults, and trips in protective systems.
Assist in developing other team members' skills and knowledge.
Serve as shift supervisor in the shift supervisor's absence and provide supervisory support as necessary.
Install, monitor, inspect, troubleshoot, and ensure the reliability of electrical and electronic control systems and components, process equipment, and AC/DC utilities.
Troubleshoot and repair or replace defective and damaged parts.
Maintain electromechanical starters and motors using electronic interface boards, variable-frequency drives, programmable logic controllers, human-machine interfaces, instrumentation, and controllers.
Procure supplies and spare parts to ensure effective and timely equipment maintenance.
Maintain and revise instruction manuals, drawings, schematics, maintenance logs, and other required documentation.
Perform other duties as assigned.

Desired Qualifications

Experience with computerized maintenance management systems.
Programmable logic controller troubleshooting experience.
Experience in a heavy industrial environment.
Experience with maintenance, repair, and operations systems and SAP.
Graduation from an instrumentation, electronics, or mechatronics program at a recognized trade school.

it's what's inside that counts

_______________________________

$5,000 Signon Bonus!

There’s more to CMC than our products and the buildings, structures, and roads they go into. At CMC, it’s the people inside our recycling centers, fabrication plants, manufacturing facilities, steel mills and offices that make us who we are as a company. Our success comes from finding, retaining, and supporting the highest quality talent by offering:

Day 1 Benefits Coverage with low cost Medical, Vision, Dental
Day 1 Paid-time Off and Vacation
4.5% Company Match 401(k) plan
$500 Annual Company-paid Lifestyle Benefit
Competitive Compensation and Bonuses
Company-paid Life and Disability Insurance
Employee Stock Purchase Plan
Training and Advancement Opportunities

Why This Job

CMC provides an excellent opportunity to learn the steel, construction reinforcement and ground stabilization industries and to grow in your career. Whether you will spend your day brainstorming in an office cubicle, operating a crane, running manufacturing equipment or troubleshooting technical obstacles, at CMC, you’ll get the training and support from your team that you need to excel in your role and reach your full potential.

What You'll Do

Ability to troubleshoot all aspects of Medium/High Voltage equipment for an industrial steel production facility
Lead facility’s annual testing and inspection requirements
Diagnose and remedy complex problems related to incoming power irregularities and substation problems
Diagnose and remedy complex problems related to transformer protection Relays, complex faults and trips in all protective
Assist in developing other team member’s skills and knowledge
Serve as Shift Supervisor in his/her absence and provide supervisory support, as necessary
Install, monitor, inspect, troubleshoot, and ensure reliability of all electrical, electronic control systems and components, process equipment, and AC/DC utilities
Perform troubleshooting and repair or replacement of defective and damaged parts
Learn and maintain the variety of electromechanical starters and motors using sophisticated electronic interface boards, VFDs, PLCs, HMIs, instrumentation, and controllers
Procure supplies and spare parts to ensure effective and timely maintenance of equipment
Maintain and revise instruction manuals, drawings, schematics, maintenance logs, and other documentation, as required
Performs other duties as assigned
Diagnose and remedy complex problems related to incoming power irregularities andsubstation problems
Install, monitor, inspect, troubleshoot, and ensure reliability of all electrical, electronic controlsystems and components, process equipment, and AC/DC utilities
Lead facility's annual testing and inspection requirements
Learn and maintain the variety of electromechanical starters and motors using sophisticated electronic interface boards, VFDs, PLCs, HMIs, instrumentation, and controllers
Procure supplies and spare parts to ensure effective and timely maintenance of equipment

What You'll Need

Minimum 2 years electrical maintenance experience preferred
CMMS experience preferred
PLC troubleshooting experience preferred
Required to know and understand Grounding systems and Maintenance
Must understand and demonstrate abilities in the following; Electrical and Mechanical Maintenance, Hydraulics and Pneumatics and Arc Flash Safety
Experience with Electrical relay control maintenance and repair proficiency, especially for cranes
Extensive experience in maintenance of electrical control and distribution systems and analog and digital circuits
Extensive experience in maintenance of relay and ladder logic, industrial communications networks, instrumentation and automation control systems
Experience or formal education and lab training on PLCs, or the ability to navigate block logic, ladder logic, or other digital logic interfaces
Experience with MRO system, SAP system preferred
Experience in manufacturing equipment processes and working knowledge of associated controls
Training and/or experience in instrument and sensor calibration
Knowledge of hydraulic and pneumatic circuit components
Experience in a heavy industrial environment is preferred, but not required
Experience with industrial electrical repairs including troubleshooting and repair of A/C - D/C drives and motors, PLC's and 480 Volt 3 phase electrical
Possess specific knowledge of both hydraulic and electrical systems and equipment
Must practice safe working habits and follow OSHA, EPA, and company safety policies, rules, and regulations
Must be able to work overtime and cross train as required
Must be able to work outside under all weather conditions, including extreme heat and cold temperatures

Your Education

High School Diploma or GED required
Graduate of an instrumentation, electronics or mechatronics program from a recognized trade school preferred

We are CMC, a Fortune 500® company at the leading edge of our industry. Our construction reinforcement and steel products have supported construction projects and structures around the world. The secret to our success? We’ve built our legacy by assembling a team of innovators and doers to tackle some of the most challenging construction reinforcement problems facing our world for more than 100 years — and we’re just getting started.

If you’re ready to join a team working to make our industry more sustainable, support the bridges, roadways, buildings and infrastructure that connects our communities, and do meaningful work, you’re ready to join CMC. Apply today and start moving your career — and our world — forward. Let's build a better world!

CMC is committed to providing equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, age, physical or mental disability, national origin, citizenship, military or veteran status, sexual orientation, gender identity and/or expression, genetic information, or other status protected by federal, state or local law.

About the Company

Commercial Metals

Recycling-based steel production and fabrication

Commercial Metals Company (CMC) manufactures steel and metal products in a vertically integrated model that spans recycling, steel production, and fabrication. It runs recycling plants to collect and process scrap metal, which serves as the main raw material for its mills. The steel mills produce products such as rebar, merchant bar, and wire rod, which are sold mainly to the construction industry for infrastructure, commercial, and residential projects. CMC also operates fabrication facilities that customize steel products by cutting, bending, and other processing to meet customer needs. The company mainly serves customers in the United States and Europe and maintains control over the entire supply chain—from scrap sourcing to finished products—giving it cost advantages and tighter quality control over the final materials.

Company size: Not listed
Company stage: IPO
Headquarters: Irving, TX
Founded: 1915

Recently Posted Jobs

Explore more opportunities at Commercial Metals

See more jobs