N

Neurophos

Optical metasurface AI accelerators

Chief Engineer - Prototype System Integration and Experimentation

Hardware Systems IntegrationConfirmed live in the last 24 hours
Full-timeAustin, TX, USAIn-person

About the Job

Requirements

  • A BS is required in Electrical Engineering, Optical Engineering, Applied Physics, or a closely related field; an MS or PhD is strongly preferred.
  • At least 15 years of professional experience developing complex multidisciplinary hardware systems, including at least 3 years as the responsible system-level engineer or technical lead, and demonstrated ownership of a system from architecture through design, integration, laboratory bring-up, and experimental characterization.
  • Ability to construct and maintain requirements sets, interface control documents, verification matrices, and quantitative performance budgets, and to allocate top-level requirements defensibly to subsystems.
  • Ability to design experiments isolating individual physical mechanisms in systems with simultaneous effects, with familiarity with measurement uncertainty, repeatability, confounding variables, statistical design of experiments, and sensitivity analysis.
  • Strong working knowledge of analog and high-speed electronics, including data-converter interfacing, transmission lines and termination, coupling and biasing, amplifier and detector front-ends, noise and distortion, power integrity, and grounding; able to independently review schematics and component selections and identify design errors.
  • Deep understanding of impairment mechanisms in optical and mixed-signal systems, including thermal, shot, and flicker noise; component mismatch; compression and harmonic distortion; bandwidth and group-delay limitations; crosstalk; quantization; jitter; and drift, and their system-level effects.
  • Solid understanding of optical system fundamentals, including sources, fiber and free-space propagation, electro-optic modulation, photodetection, optical power budgets, and coupling and alignment tolerances.
  • Working fluency in linear algebra, signal processing, and modulation and encoding theory sufficient to assess alternative mathematical compute encodings and their hardware precision, dynamic range, and noise-tolerance implications.
  • Experience serving as technical authority over external design houses, contract manufacturers, or component vendors, including specification writing, design reviews, deliverable acceptance, and technical negotiation.
  • Sufficient understanding of embedded firmware, FPGA-based control, and host-side software architecture to specify, review, and challenge software interfaces to hardware.
  • Strong proficiency in Python and/or MATLAB for performance budgeting, test automation, measurement data analysis, and system-level modeling.
  • Technical communication and documentation skills, and the ability to make and defend architectural decisions across disciplines with internal teams and external partners.

Responsibilities

  • Own, maintain, and defend the end-to-end system performance budget, allocate accuracy, signal-to-noise, and bandwidth requirements to subsystems, keep the budget synchronized with designed and measured hardware, identify performance-limiting elements, and drive trade studies.
  • Define and maintain the system architecture, requirements, and interface definitions; ensure electrical, optical, mechanical, thermal, and data interfaces are unambiguous, consistent, and traceable; adjudicate interface conflicts and control design changes.
  • Serve as technical counterpart to external design houses and component vendors; review schematics, layouts, bills of materials, component selections, and analyses; verify specifications and system-budget compliance; lead design reviews and recommend acceptance or rejection of deliverables.
  • Evaluate mixed-signal and high-speed electronic designs, including drive and termination networks, data-converter interfaces, transimpedance and amplification chains, power distribution, grounding, and signal integrity, as well as optical and opto-mechanical designs, for correctness, manufacturability, and margin.
  • Ensure firmware and host software meet hardware requirements and system use cases; review control and data paths, register maps, timing and sequencing, calibration hooks, and test interfaces; hold software work to the hardware specification and schedule discipline.
  • Plan and lead system integration, define acceptance criteria at subassembly boundaries, drive laboratory bring-up and debugging, correlate measured performance with predicted budgets, identify discrepancy root causes, and feed results into the architecture and model.
  • Design and execute controlled experiments quantifying how optical and electrical impairments—including noise, mismatch, nonlinearity, crosstalk, dispersion, drift, quantization, and timing error—affect end-to-end computational accuracy; inject, sweep, and stress impairments, separate correlated effects, and produce quantitative sensitivity results.
  • Enable experimentation with alternative mathematical encodings and signaling schemes for optical compute; assess hardware requirements, define system changes for evaluation, and translate measurements into architectural recommendations.
  • Steward the prototype as a long-lived measurement instrument; keep it instrumented, reconfigurable, calibrated, and documented, maintain its measurement uncertainty budget, and evolve hardware and software to support new experiments without rebuilding the platform.
  • Maintain system requirements, verification and test matrices, and configuration-controlled program documentation, extending them to cover experimental configurations.
  • Own the technical risk register and open-item list, driving each item to a documented decision with a named owner and closure date.
  • Interface with analog integrated-circuit, digital design, photonic device, optics, and packaging teams to preserve subsystem design intent at system level and translate measured results into design guidance.
  • Partner with system modeling and calibration teams to validate parameters, design experiments distinguishing model hypotheses, and refine models using measured data.
  • Build and maintain automated measurement, data-capture, and analysis infrastructure for repeatable, archivable experimental campaigns.
  • Contribute to build planning, long-lead procurement decisions, test-equipment definition, and schedule risk assessment for prototype builds.
  • Mentor engineers across disciplines and improve the organization's systems-engineering and experimental rigor.

Desired Qualifications

  • Experience owning a laboratory testbed or experimental platform for multiple years and supporting several teams' successive research and architecture questions.
  • Experience with high-channel-count systems requiring many parallel electrical and optical channels to be matched, aligned, and calibrated.
  • Familiarity with FPGA- or RFSoC-class platforms integrating high-speed data converters and associated board-level design practices.
  • Experience with fiber-optic assemblies, connectorization and polish standards, optical alignment, and opto-mechanical tolerancing.
  • Background in optical transceivers, coherent or direct-detection links, silicon photonics, or photonic computing platforms.
  • Experience with modulation formats, coding, and precision-noise trade-offs in analog or optical computing, analog signal processing, or high-order signaling links.
  • Familiarity with calibration architectures and their hardware and software implications at system level.
  • Experience with Monte Carlo analysis, error budgeting, and correlating behavioral system models with measured hardware.
  • Experience running formal gate reviews, such as PDR/CDR-style reviews, across internal teams and external suppliers.
  • Familiarity with Cadence Virtuoso, Spectre, or comparable circuit-simulation environments for independent verification of vendor analyses.
  • Laboratory proficiency with high-speed oscilloscopes, network and spectrum analyzers, optical power meters, optical spectrum analyzers, and precision alignment equipment, including automated instrument control.
  • Experience with configuration-controlled engineering documentation and issue tracking in a version-controlled environment.

About the Company

Neurophos

Optical metasurface AI accelerators

Neurophos designs AI accelerator chips built with optical metasurfaces and silicon photonics to deliver high-density, energy-efficient AI computation for data centers. Its processors are designed to shrink optical components by about 8000x, increasing compute power per dollar spent and reducing both capital and operating expenditures. The product works by using optical processing techniques that handle AI inference workloads more efficiently than traditional GPUs or electronic AI accelerators, enabling faster throughput with lower power use. Neurophos differentiates itself by combining optical metasurfaces with silicon photonics to achieve higher density and energy efficiency, targeting data centers and enterprises that need scalable, cost-sensitive AI inference. The company aims to reshape the AI landscape by offering faster, denser, and more energy-efficient AI computation while lowering the total cost of ownership for data centers.

Company size
51-200
Company stage
Series A
Total funding
$117.2M
Headquarters
Austin, TX
Founded
2020

Recently Posted Jobs

Explore more opportunities at Neurophos

See more jobs