DUTIES AND RESPONSIBILITIES
The Electronics Technician Maintenance (ETM) III applies advanced technical knowledge to solve complex problems that typically cannot be solved solely by referencing manufacturers' manuals or similar documents. Examples of such problems include determining the location and density of circuitry, evaluating electromagnetic radiation, isolating malfunctions, and incorporating engineering; changes. Work typically requires an understanding of the interrelationships of circuits, exercising independent judgment in performing such tasks as making circuit analyses, calculating wave forms, and tracing relationships in signal flow, using complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment. Work may be reviewed by supervisor for general compliance with accepted practices. This position may provide technical guidance to lower level technicians.

The ideal candidate will have ten (10) years of experience performing overhauls and repairs on any of the following shipboard electronics systems: Commercial Broadband Satellite Program (CBSP), Digital Modular Radio (DMR), Navy Multiband Terminal (NMT), High Frequency (HF), Radio Frequency (RF), High Frequency Radio Group (HFRG), Tactical Air Navigation System (TACAN), Electronic Support Measures (ESM), or Naval Shipboard Antenna Systems.

REQUIRED SKILLS/YEARS OF EXPERIENCE
The ETM III will demonstrate the following core technical capabilities and system-specific experience:
Mandatory System Training in Commercial Broadband Satellite Program (CBSP):

Must have completed formal system-specific training on either of the following variants:
Unit Level Variant (ULV) AN/USC-69(v)3/A(v)3/B(v)3/C(v)3
Force Level Variant (FLV) AN/USC-69(v)2/A(v)2
Must have complete understanding of electrical safety, raw AC/DC power handling, and Hazards of Electromagnetic Radiation to Personnel (HERP/RF radiated power) protection.
Must have the ability to read, interpret, and execute steps in System Operational Verification Test (SOVT) documents, including all safety and security measures.
Must have proficiency in reading and interpreting shipboard installation drawings, including Installation Requirements Drawings (IRD), Ship Installation Drawings (SID), Ship Alterations (SHIPALT), and Liaison Action Requests (LAR).
Must have demonstrated experience with shipboard hardware installation, high-standard cable management, and conducting thorough physical inspections (checking for cable damage, correct labeling, and secure equipment mounting).
Must have hands-on proficiency in configuring and verifying settings on Cisco routers and network switches.
Must have experience configuring and managing cryptographic equipment, specifically the KG-175 TACLANE.
Must have a solid understanding of networking protocols, including TCP/IP, basic routing, Access Control Lists (ACLs), and Virtual Private Networks (VPNs).
Must have familiarity with core cybersecurity principles, the purpose and application of Security Technical Implementation Guides (STIGs), and standard vulnerability scans.
Must have understanding SATCOM architecture (ship/shore), SATCOM modem settings
Must have the ability to deliver detailed technical documentation and final system status reports upon project completion to ensure smooth cross-functional handoffs.
The ETM III must be competent in operating the following specialized tools to troubleshoot SATCOM links and electronic components:
     a. Digital Multimeter: Perform basic AC (single-phase and 3-phase) and DC power verifications, alongside DC-bias troubleshooting of sub-level electronic components.
     b. Spectrum Analyzer: Setup and display the Signal Of Interest (SOI), interpret reference levels, bandwidth, Carrier-to-Noise (□(C/N)) ratios, distinguish between dBm and dB readings, and perform/analyze Insertion Loss (□(S_□21 )) and Voltage Standing Wave Ratio (VSWR) measurements.
     c. Bit Error Rate Tester (BERT): Clear understanding of the differences between Serial and Ethernet BERT, with the ability to configure and utilize Serial and/or Ethernet BERT to troubleshoot active SATCOM links.
     d. LAN Cable Tester: Capability to test Ethernet cables for proper pinout, continuity, and wiring verification.
     e. Software Tools: Proficient with terminal emulators (e.g., PuTTY, Tera Term) and GUI-based management interfaces to configure and diagnose routers, modems, and Ethernet switches.

Education: HS Diploma
Travel Required: 25%
Work Location: San Diego, CA
This position is required to have and maintain a Secret US DoD security clearance.

PREFERRED SKILLS

Desired System Experience - STtNG Experience: Direct, hands-on experience or familiarity with the Satellite Terminal (Transportable) non-geostationary (STtNG) Increment 1 is highly desired.
Fleet Support and Testing: Demonstrated experience performing shipboard testing, specifically including the execution of System Operational Verification Tests (SOVT).
Navy Modernization: Proven experience supporting Navy modernization initiatives, installation cycles, and system upgrades for C4I systems.
Networking and Virtualization: Hands-on experience configuring and maintaining Virtual Cisco Routers.
Industry Certifications: Possession of current CompTIA Security+, CompTIA Network+, and CCNA certifications.

REMARKS
Must be able to communicate effectively in English, both verbally and in writing.
Must be able to interface effectively with all levels of technical and management personnel.

Compensation: $46 - $58 an hour.
Compensation for positions at Centurum vary depending on a wide range of factors including, but not limited to, location, responsibilities, skill set, and level of experience.

This Labor Category is a hard to fill position.

EOE M/F/Disability/Veteran

***When responding to this posting please reference job # SD26-124 Electronics Technician Maintenance III (CBSP) SATCOM**

Benefits

Full-time employees are eligible for the following benefits enrollment from their date of hire:

Health Insurance - Centurum provides insurance for employee and dependent in a comprehensive package. Coverage for vision care is included. This option is available on a cost-sharing basis.
Dental Insurance - Available in conjunction with Health Insurance for an additional cost. Provides oral maintenance care for employee and dependent.
Basic Life Insurance - Company provided benefit for all full-time employees.
Supplemental Life Insurance - Optional life insurance coverage to employees at group rates.
Dependant Life Insurance - Optional coverage for dependents at a group rate.
Long Term Disability Insurance - Optional coverage available to employees at group rates.
Vacation and Sick Leave - Leave accrual is determined by length of service.
Holidays - The company observes ten paid holidays each year.
Retirement 401(k) Plan - Centurum’s corporate benefits package includes 401K with a company bi-weekly match and a year-end profit sharing company match for all eligible employees. Investments can be made into selected funds under this plan.

Centurum is an Equal Opportunity Employer, providing employment opportunities for all persons without discrimination on the basis of race, color, religion, sex, sexual orientation, national origin, age, disability, marital status, citizenship or any other characteristic protected by U.S. law. Centurum makes reasonable accommodations for persons with disabilities.

Centurum

Electronics Technician Maintenance 3 - CBSP, SATCOM

About the Job

Requirements

Responsibilities

Desired Qualifications

About the Company

Centurum

Recently Posted Jobs