T

Tutor Intelligence

Leases AI-powered manufacturing and packaging robots

Manufacturing Test Engineer - Robotics

Quality EngineeringConfirmed live in the last 24 hours
Full-timeWatertown, MA, USA$120k - $190k /yrIn-person

About the Job

Requirements

  • A BS in Electrical, Mechanical, Computer, or Mechatronics Engineering is required.
  • At least 3 years of full-time experience in manufacturing or production test engineering for electromechanical products is required.
  • Experience designing test stations from a blank page, including explaining the architecture, instruments, and fixturing, is required.
  • Experience setting pass/fail limits based on requirements, characterization data, guard-banding, and capability analysis is required.
  • Hands-on experience with statistical process control, control charts, Cp/Cpk, and gage R&R or other measurement system analysis is required.
  • Strong Python skills for test automation and data analysis are required.
  • Strong electrical debugging skills, including reading schematics and using oscilloscopes, meters, logic analyzers, and CAN traces, are required.
  • Experience taking a product from pilot builds into a production ramp and measurably improving first-pass yield or test time is required.

Responsibilities

  • Define test strategy and coverage across incoming parts, subassembly benches, and end-of-line acceptance testing, tying tests to failure modes and identifying test limitations.
  • Design and build bench fixtures, hardware-in-the-loop rigs, and end-of-line testers, including instruments, power, signal switching, safety interlocks, and calibration.
  • Set pass/fail limits from engineering requirements and data, document the reasoning, and add guard-bands where measurement uncertainty requires them.
  • Set statistical process control limits for parameters including motor current, encoder error, torque, bus voltage, CAN error counts, and cycle time; use control charts to detect drift and shifts.
  • Run gage R&R studies on fixtures and instruments and set calibration intervals.
  • Write Python test sequences, log results to ION by serial number, and build dashboards for first-pass yield, failure-mode Paretos, Cpk, and escapes.
  • Debug failing robots and subassemblies to verified root cause using a scope, meter, and CAN traces, and escalate demonstrated design problems to Engineering.
  • Turn line failures, field returns, and MRB findings into new tests, tighter limits, or process fixes, and retire tests that do not catch failures.
  • Test actuators and motor drives, including joint motors, servo drives, encoders, and homing.
  • Test harnesses and power systems, including continuity and hipot, power distribution, battery, and BMS.
  • Test communications and controllers, including CAN, EtherCAT, embedded controllers, firmware, and configuration.
  • Test sensors and compute systems, including cameras, calibration, Linux/ROS compute, and provisioning.
  • Deliver a written test strategy and coverage map approved before the 2027 production ramp.
  • Put bench tests live on critical subassemblies with documented limits and completed gage studies.
  • Ensure every robot passes an automated acceptance test and results are traced to its serial number in ION.
  • Deploy control charts for key parameters and report first-pass yield and Cpk weekly.
  • Reduce field escapes and add a test for each escape that would have detected it.

Desired Qualifications

  • LabVIEW or TestStand experience is a plus.
  • Six Sigma Green Belt or Black Belt certification, or formal design-of-experiments experience, is desirable.
  • Experience with test data infrastructure, databases, MES such as ION, or yield dashboards is desirable.
  • Mobile robot or robot arm experience is desirable.
  • Daily use of AI tools such as Claude to build tools and analyze data is desirable.

About the Company

Tutor Intelligence

Leases AI-powered manufacturing and packaging robots

Tutor Intelligence provides AI-powered manufacturing and packaging robots to American factories through flexible 12-hour leasing. The robots handle tasks like conveyor loading, end-of-line packing, kitting, palletization, and depalletization, and are powered by a hybrid human-artificial intelligence engine that enables deployment in minutes rather than months. Unlike traditional robotics purchases, the company offers a scalable, cost-effective leasing model that delivers a steady revenue stream while giving clients the ability to scale automation up or down as needed. The company’s goal is to help factories boost productivity and reduce labor costs by making automation accessible without large upfront investments.

Company size
51-200
Company stage
Series B
Total funding
$113.5M
Headquarters
Watertown, MA
Founded
2021

Recently Posted Jobs

Explore more opportunities at Tutor Intelligence

See more jobs