S

Spirit AeroSystems

Manufactures aerostructures for airplanes

CNC-PLC Maintenance Electrician

Equipment MaintenanceConfirmed live in the last 24 hours
Full-timeWichita, KS, USA$30 - $50.48 /hrIn-person

About the Job

Requirements

  • At least 2 years of industrial electrical or electronic maintenance experience, or at least 2 years of formal electrical or electronic, industrial controls, or related technical education or training, or an equivalent combination of at least 1 year of relevant training and 1 year of industrial electrical maintenance experience.
  • Knowledge of programmable logic controller inputs, outputs, internal bits, timers, counters, latching and unlatching instructions, scan cycles, and proportional-integral-derivative control loops.
  • Experience reading and interpreting electrical schematics, wiring diagrams, blueprints, ladder-logic diagrams, equipment manuals, and technical documentation.
  • Working knowledge of industrial electrical fundamentals, including Ohm’s Law, two-wire control circuits, motor starters, overload protection, fuses, relays, contactors, and three-phase power.
  • Experience safely using electrical testing and diagnostic equipment, such as digital multimeters and insulation-resistance testers.
  • Experience working with 480-volt, three-phase electrical systems, including motor rotation and safe voltage-verification practices.
  • Experience troubleshooting industrial electrical equipment, electronic controls, motors, and automated manufacturing systems.
  • Must be willing and able to work any assigned shift, including second or third shift, variable workweeks, weekends, holidays, and overtime as operationally required.
  • Must successfully complete a written and/or practical, job-related skills assessment as part of the selection process.

Responsibilities

  • Perform maintenance activities on electrical equipment and machine circuits and systems, including raceways, lighting and lighting controls, power transformers, distribution centers, motor control centers, breaker panels, machine tools, cafeteria equipment, grinders, motors, pumps, heaters, hoists, reversing controlled motors, data and voice communications, fiber-optic and copper cabling, programmable logic controllers, variable-frequency drives, cranes, parts markers, production manufacturing processes, controllers, thermal process equipment, networked computer systems, computer numerical and electronic controlled machines, robotics, lasers, part-marking machines, welders, paging and phone systems, time-clock systems, radios, pagers, radio-frequency identification devices, data and video communication systems, power conditioning and backup systems, server-room systems, and associated software and components.
  • Perform software backups of applicable assets.
  • Use and update blueprints, schematics, software, and wiring diagrams to determine compliance with wiring specifications and installation locations, subject to applicable specifications, codes, and ordinances, and to complete work assignments.
  • Devise and fabricate necessary testing aids and equipment.
  • Use applicable machinery, production aids, tools, instruments, test equipment, predictive technologies, and shop theory to complete work assignments.
  • Maintain current licenses and certifications required to perform the duties and responsibilities.
  • Assemble and verify data for required records and reports, complete paperwork electronically or manually, and order parts associated with work assignments.
  • Work with and assist employees engaged in maintenance installation, repair, retrofit, modification, calibration, adjustment, and testing of electrical and electronic plant facilities.
  • Coordinate and work with Management, Engineering, contractors, equipment manufacturers and vendors, and other organizations to analyze facility power and equipment design for safety, capacity, contingency, and improvement requirements, and to plan and design equipment specifications, oversee installation, and sequence installation of new and rebuilt power equipment and systems.
  • Train employees and perform other duties as requested or required.
  • Work with Power Distribution employees on equipment with incoming voltages above 600 VAC.
  • During initial checkout of new, relocated, or rebuilt assets and systems, troubleshoot and correct software, design, and engineering-related issues to complete projects on time.
  • Work with Management, Engineering, equipment manufacturers and vendors, and other organizations to plan, design, and sequence installation of new and rebuilt equipment.
  • Design, support, and maintain electronic systems required for operation of the maintenance organization.
  • Coordinate with other organizations and specialties to provide reliability failure analysis and problem resolution for assets and systems.
  • Research, develop, evaluate, and deliver skills training.
  • Design, install, and maintain Facilities servers, storage devices, and associated systems.

Desired Qualifications

  • Experience troubleshooting, maintaining, or modifying programmable-logic-controller-controlled equipment and PLC ladder logic.
  • Experience with Allen-Bradley, Siemens, or FANUC programmable logic controllers and associated programming or communication software, including RSLinx or equivalent applications.
  • Experience with computer numerical control machine controls, including G-code, M-code, servo systems, axis positioning, and diagnosing lost motion or backlash.
  • Knowledge of variable-frequency drives, servo motors, gearboxes, and closed-loop control systems.
  • Experience troubleshooting feedback devices, including absolute and incremental encoders, velocity feedback, and position feedback.
  • Basic industrial networking knowledge, including IP addressing, routers, local area networks, wide area networks, and network bandwidth.
  • Experience conducting motor and insulation-resistance testing.
  • Experience with Siemens 840D controls.
  • Experience with Siemens S7-400 programmable logic controllers.
  • Experience with FANUC 15i, 15m, 30i, or equivalent controls.
  • Experience with Okuma OSP controls.
  • Experience with Matsuura, Makino, or similar computer numerical control equipment.
  • Experience with Acramatic 650/2100 controls.

About the Company

Spirit AeroSystems

Manufactures aerostructures for airplanes

Spirit AeroSystems builds large aircraft structures like fuselages and wings for commercial airplanes, defense platforms, and business jets. It designs, fabricates, and supplies these major aerostructures to customers such as Boeing and Airbus, who then integrate them with other parts to complete airplanes. The company stands out because it spun out from Boeing as an independent supplier and operates at a scale focused on large aluminum and composite structures, with growth in defense and aftermarket services beyond commercial airframes. Its goal is to provide a stable, end-to-end supply of aerostructures, expand its defense and aftermarket offerings, and ensure reliable production across its key programs, including possible alignment with Boeing to stabilize the 737 supply chain.

Company size
5,001-10,000
Company stage
IPO
Headquarters
Wichita, KS
Founded
2005

Recently Posted Jobs

Explore more opportunities at Spirit AeroSystems

See more jobs