C

Calder

Delivers targeted luxury-brand audience segments

Calibration Engineer

Robotics & Autonomous SystemsConfirmed live in the last 24 hours
Full-timeSingaporeSGD101.5k - SGD235k /yrIn-person

About the Job

Requirements

  • A B.S. or M.S. in Robotics, Mechanical Engineering, Electrical Engineering, Computer Science, or equivalent practical experience.
  • At least 3 years of hands-on camera or multi-sensor calibration, including intrinsics, extrinsics, stereo, IMU, or hand–eye calibration, and familiarity with how those pipelines fail.
  • Experience automating calibration with robot arms, or the ability to build automation using planned pose sets, hand–eye solving, and repeatable routines.
  • Hands-on experience with industrial or collaborative robot arms, including kinematics, control, safety, and real-hardware bring-up rather than simulation alone.
  • Working knowledge of a robotics software stack such as ROS/ROS2 or a comparable driver, control, and logging stack; ability to read and modify C++ and Python.
  • Hardware fluency to assemble, debug, and iterate physical setups involving mounts, sensors, cabling, compute boxes, and basic mechanical/electrical troubleshooting.
  • Comfort physically setting up robots, calibration rooms, and wearable capture hardware in a lab.
  • Ability to debug hardware and software issues and identify whether failures come from loose mounts, synchronization bugs, or incorrect transforms.
  • Ability to write clear procedures that other people can follow.

Responsibilities

  • Own end-to-end multi-sensor calibration across rigs and egocentric setups in APAC, including camera intrinsics and extrinsics, stereo, camera–IMU, and camera–arm, eye-in-hand, and eye-to-hand transforms.
  • Use robot arms to make calibration repeatable by planning and programming pose trajectories that sweep targets and sensors through full coverage, automating capture and solving, and reducing operator-to-operator variance.
  • Define and maintain calibration quality thresholds for reprojection error, coverage, observability, and run-to-run repeatability, and gate captures against those thresholds.
  • Design and operate egocentric calibration setups, including boards, poses, lighting, mounts, and capture procedures, to produce repeatable, production-quality results.
  • Diagnose calibration and tracking failures from real captures, including synchronization, coverage, board detection, extrinsics drift, and kinematic error, and improve procedures and software accordingly.
  • Stand up, maintain, and debug the robotics software stack needed for calibration and capture, including drivers, kinematics, control, teleoperation, logging, and playback.
  • Prepare robot arms, end-effectors, and lab equipment for calibration work, including mounts, cameras, IMUs, compute, cabling, and safety setups.
  • Integrate sensors and robots into a coherent capture cell, including time synchronization, frames, URDF/kinematic models, and calibration provenance for downstream SLAM, reconstruction, and policy training.
  • Work with hardware, firmware, and capture software teams on mechanical and electrical details that affect calibration quality, including camera placement, rigidity, vibration, cabling, and compute.
  • Write runbooks, recipes, and checklists so other operators can reproduce calibration and robot setups.
  • Support field and lab issues, including headset calibration failures, geometrically incorrect captures, and robots that will not home.

Desired Qualifications

  • Experience with kinematic calibration, robot-cell calibration, or factory/lab calibration-room work.
  • Familiarity with Charuco, AprilTag, or checkerboard workflows and bundle adjustment.
  • Experience with egocentric, wearable, or AR/VR headset capture, including multi-camera headsets, IMUs, or body-worn rigs.
  • Experience with time synchronization, including PTP, hardware triggering, or software synchronization.
  • Familiarity with URDF, MoveIt, Pinocchio, Drake, or vendor arm SDKs.
  • Experience with dexterous hands, grippers, or teleoperation using VR, gloves, or leader–follower setups.
  • Experience with NVIDIA Jetson, industrial PCs, or similar on-robot compute.
  • CAD skills sufficient to design a mount or adapter, using SolidWorks, Fusion, or similar.
  • Background in spatial data, SLAM, or robotics data collection at scale.

About the Company

Calder

Delivers targeted luxury-brand audience segments

Calder is a media technology platform that helps brands connect with high-value affluent consumers using the Global Wealth Graph, which analyzes how wealthy individuals browse, research, and buy across industries and regions. It creates precision audience segments for over 100 sectors, activating them on major ad buying platforms without requiring client tech integration. Segments are tailored by region and city to reflect context and perception, and offered as pre-built or custom packages in 75+ countries. The goal is to improve advertising efficiency by directing spend toward audiences with higher potential value, differentiating from competitors by focusing on affluent audiences and brand-appropriate environments rather than broad reach.

Company size
11-50
Company stage
Not listed
Total funding
Not listed
Headquarters
New York City, New York
Founded
2025

Recently Posted Jobs

Explore more opportunities at Calder

See more jobs