Pacific Energy Canada

Millwright

Equipment MaintenanceConfirmed live in the last 24 hours

Full-timeSquamish, BC, CanadaCA$60 /hr

About the Job

Requirements

A British Columbia Journeyman Millwright Certification or Red Seal Journeyman credential is required.
Five to seven years of experience in the oil and gas industry, such as LNG plants, refining, or upgrading, is required.
Knowledge of rigging methods and techniques for safely lifting and moving heavy materials is required.
Ability to calculate loads and determine appropriate rigging equipment and techniques for each task is required.
Experience troubleshooting piping and resolving piping system leaks is required.
Ability to support planned and unplanned maintenance and turnarounds is required.
Ability to work weekends and extended hours as required is required.
Ability to work in physically demanding environments is required.
Strong mechanical aptitude and problem-solving skills are required.
Ability to communicate respectfully with coworkers through management is required.
Good written and verbal communication skills are required.
Ability to work under pressure, handle multiple tasks, and change priorities within tight time frames is required.
Ability to work collaboratively within a team environment is required.
Candidates must be legally entitled to work in Canada.
The position requires on-site work at the project site in Squamish, British Columbia.

Responsibilities

Support the development of maintenance procedures before plant start-up.
Participate in plant walkdowns covering rotating equipment.
During plant commissioning, verify installation and witness dynamic runs of rotating equipment.
Participate in and adhere to health and safety programs and policies.
Troubleshoot rotating assets, compressors, pumps, fans, and hydraulic systems.
Assist pipefitters with blinding and pipe strain.
Repair valves, pumps, fans, and compressors.
Perform major overhauls of centrifugal compressors.
Replace dry gas seals.
Conduct equipment alignments.
Work closely with other trades to maximize equipment availability and reliability.
Install, inspect, and repair mechanical and hydraulic components.
Perform predictive and preventive maintenance on pumps, gearboxes, fin fans, loading arms, hydraulic systems, and compressors.
Perform predictive and preventive maintenance such as lubrication, greasing, and vibration collection.
Calculate loads and determine appropriate rigging equipment and techniques for each task.
Comply fully with company health, safety, security, and environmental policies and guidelines.
Champion health, safety, security, and environmental practices as a member of the LNG Maintenance Team.
Intervene promptly to mitigate risks and ensure the safety of personnel and the plant.
Demonstrate a personal commitment to influencing safety behavior in the plant.
Use standard hand signals and communication protocols when working with cranes and other lifting equipment.

Desired Qualifications

Preference is given to candidates with a dual Millwright/Pipefitter or Millwright/Welder ticket.
Turbo machinery experience is an asset.
Level 1 or Level 2 vibration certification is an asset.
A Master certification in Rigging is an asset.
Experience working with large multidisciplinary teams and contractors in a multicultural environment is an asset.
Commitment to continuous improvement processes is desirable.

Millwright

Pacific Energy Canada · Squamish, Canada · Full-time · Posted 2026-03-27

Workplace: on_site

Department: Maintenance

Description

Project

The Woodfibre LNG Project is located approximately 7 km west-southwest of Squamish, British Columbia. It involves the construction and operation of a liquefied natural gas (LNG) export facility on the previous Woodfibre pulp mill site, which would have a storage capacity of 250,000 m3 and would produce approximately 2.1 million tons per year of LNG.

Woodfibre Management Ltd. is a privately held Canadian company based in Vancouver and a subsidiary of Pacific Energy Corporation Limited.

Position

The Millwright is an integral part of Woodfibre LNG's dynamic team, reporting directly to the Mechanical Maintenance Supervisor. This is a hands-on role involving the installation, maintenance, and repair of rotating equipment on industrial sites, all work is performed in accordance with applicable codes and safety regulations.

Key Responsibilities:

The successful applicant will:

Prior to start-up of the plant, support the development of maintenance procedures
Participate in plant walkdowns covering rotating equipment scope
During Commissioning of the plant: verify installation and witness dynamic runs of rotating equipment
Participate in and adhere to health and safety programs and policies
Troubleshooting rotating assets, compressors, pumps, fans, and hydraulic systems
Assist pipefitters with blinding and pipe strain
Repair valves, pumps, fans & compressors
Perform Major overhauls of Centrifugal Compressors
Replace Dry gas seals
Conduct Alignments
Work closely with all other trades to acquire the highest availability and reliability of our equipment
Install, inspect and repair of mechanical and hydraulic components
Preform predictive and preventive maintenance on, pumps, gearboxes, fin fans, loading arms, hydraulics, & compressors
Perform predictive and preventive maintenance (Examples: Lubrication, greasing, & vibration collection)
Calculate loads and determine the appropriate rigging equipment and techniques for each task

HSSE

100% compliance with company HSE policies and guidelines
Champion HSE as a member of the LNG Maintenance Team
Timely intervention to mitigate risks and ensure the safety of personnel and plant
Demonstrate a personal commitment to influence overall safety behavior in the plant
Understanding of standard hand signals and communication protocols used when working with cranes and other lifting equipment

Requirements

Required Experience:

British Columbia Journeyman Millwright Certification or Red Seal Journeyman
Preference will be given to candidates who hold a dual ticket (Millwright/Pipefitter or Millwright/Welder)
5-7 years of experience in the oil and gas industry such as LNG plants, Refining & Upgrading
Turbo Machinery Experience would be an asset
Level 1 or 2 Vibration certification would be an asset
Knowledge of various rigging methods and techniques for lifting and moving heavy materials safely
Ability to calculate loads and determine the appropriate rigging equipment and techniques for each task
Experience with piping troubleshooting and resolving piping system leaks

Additional Requirements:

Master certification in Rigging would be an asset
Ability to Support planned, unplanned Maintenance
Ability to support Turnarounds
Ability to work weekend and extended hours as required
Ability to work in physically demanding environments
Strong mechanical aptitude and problem-solving skills
Experience working with large multi-disciplinary teams and contractors in a multicultural environment is an asset
Communication/interpersonal skills – Ability to respectfully interact with coworkers through to management
Accepts responsibility and demonstrates a commitment to the delivery of tasks
Good written and verbal communication skills
Ability to work well under pressure, handle multiple tasks, and change priorities within tight time frames.
Ability to work collaboratively within a team environment
Energetic in pursuit of continuous improvement processes
Must be legally entitled to work in Canada
The position is based on site in Squamish, BC (Project Site)

Only qualified candidates legally entitled to work in Canada will be contacted.

Woodfibre Management Ltd. is an equal opportunity employer.

Thank you in advance for your interest!

Benefits

Hourly Rate: CAD $60/hr

Apply

Apply at Pacific Energy Canada

About the Company

Pacific Energy Canada

Company size: Not listed
Company stage: Not listed
Total funding: Not listed
Headquarters: Not listed
Founded: Not listed

Recently Posted Jobs

Explore more opportunities at Pacific Energy Canada

See more jobs