V

Valar Atomics

Manufactures nuclear fission reactors for hydrocarbons

Staff Electrical Designer

Controls & Automation EngineeringConfirmed live in the last 24 hours
Full-timeTorrance, CA, USA

About the Job

Requirements

  • An associate degree or technical diploma in electrical design, drafting, or engineering technology, or equivalent practical experience; a bachelor's degree in an engineering discipline is a plus.
  • At least 8 years of electrical or instrumentation and control design experience in power generation, process industries, or industrial facilities.
  • Demonstrated ownership of complete electrical and instrumentation drawing scope on at least one major capital project, from early design through construction support and as-built turnover.
  • A track record of design leadership, including formally checking and approving other designers' work, setting or improving computer-aided design standards, and directing drafting contractors.
  • Expert proficiency with EPLAN (Electric P8 or equivalent) and/or AVEVA Electrical at the administration level, including project structures, master data, and report templates, rather than only drawing production, with willingness to work in both.
  • Strong working knowledge of the National Electrical Code (NFPA 70) as applied to design deliverables, including wiring methods, conduit fill, cable derating, and grounding, sufficient to check others' work against it.
  • Experience with cable and raceway separation design for safety-related circuits (IEEE 384 or equivalent criteria), or demonstrably transferable rigorous separation or segregation design experience.
  • Experience with 3D plant design coordination, including clash detection and model-based drawing extraction.
  • Extensive field experience with walkdowns, redlining, as-built production, and construction support.
  • Experience mentoring, checking, or supervising the work of other designers or drafters.

Responsibilities

  • Serve as a design discipline technical authority within assigned scope; check and approve drawing packages produced by other designers and drafting contractors, and share ownership of the discipline's drawing checking program, including check standards, checker qualification, and check documentation.
  • Own assigned areas of the discipline's computer-aided design standards, including drawing templates, title blocks, symbol libraries, layer conventions, and model and drawing file organization; enforce standards across internal and contractor-produced drawings and drive convergence across projects and sites.
  • Own assigned areas of the EPLAN and AVEVA Electrical database architecture, including project structures, master data for devices, cables, and symbols, report and deliverable templates, and practices that keep database-driven deliverables, cable schedules, load lists, and wiring reports consistent and trustworthy.
  • Lead design solutions for first-of-a-kind and unconventional installation challenges, unusual routing, separation, and environmental constraints without established precedent, developing the design approach, installation details, and constructability strategy.
  • Define drawing production strategy for assigned programs, including internal versus contractor drafting allocation, package sequencing against construction need dates, and contractor drafting oversight.
  • Mentor senior and junior designers; develop designer training and qualification practices; contribute to hiring and technical interviewing for the design team.
  • Produce and own the most complex electrical and instrumentation drawing packages across reactor, nuclear fuel, power conversion, and power distribution scopes, including one-lines, three-lines, schematics, wiring and interconnection diagrams, panel schedules, load lists, and motor elementaries.
  • Own cable and raceway design for assigned scope, including cable schedules, sizing and voltage-drop checks, tray and conduit routing, fill and derating, and signal and power segregation, including approval of separation approaches for safety-related and non-safety circuits under project standards.
  • Own control panel and enclosure design consistent with UL 508A practice; grounding, bonding, and lightning protection layouts; hazardous-area classification drawings (NEC Article 500/505 or IEC 60079); and instrument installation deliverables developed with instrumentation and control hardware engineers.
  • Lead 3D model coordination for electrical and instrumentation scope, including clash resolution, routing and clearance decisions, and model-based drawing extraction practice; own resolution of interdisciplinary routing conflicts with piping, structural, mechanical, and heating, ventilation, and air-conditioning designers.
  • Approve bills of material and material take-offs; support requisitions and procurement technical evaluations for cable, raceway, panels, and installation hardware.
  • Lead field walkdowns for constructability, routing verification, and existing conditions; own the as-built program for electrical and instrumentation drawings, including redline capture standards and turnover documentation quality.
  • Own review and disposition of vendor drawing packages, contractor shop drawings, and installation deliverables for compliance with project standards and nuclear quality requirements.
  • Own design-side responses to construction and commissioning, including request-for-information resolution, field change documentation, and punch-list closure for electrical and instrumentation drawing scope.
  • Own drawing revision control and document management practices consistent with nuclear quality requirements, ensuring traceability from design change through as-built incorporation, and feed field lessons learned back into computer-aided design standards and installation details.

Desired Qualifications

  • Proficiency in both EPLAN and AVEVA Electrical, including database and master data administration in both.
  • ADDA Certified Drafter, NICET certification, or equivalent credentials.
  • Experience designing UL 508A-listed industrial control panels.
  • Experience with medium-voltage distribution design (4.16 kV and above), generator connections, and utility interconnection drawings.
  • Working familiarity with nuclear quality requirements (NQA-1, 10 CFR 50 Appendix B) as applied to design documents, drawing control, and design change traceability.
  • Experience with electrical installation design in nuclear, cleanroom, glovebox, or contamination-controlled environments.
  • Experience with computer-aided design automation or scripting (EPLAN API, AutoLISP, or equivalent) for deliverable generation.
  • Familiarity with IEC 62443 or NIST SP 800-82 as applied to the physical operational technology network layer, including cabinet, switch, and cabling infrastructure supporting network segmentation.

About the Company

Valar Atomics

Manufactures nuclear fission reactors for hydrocarbons

Valar Atomics focuses on mass manufacturing nuclear fission reactors that are designed to synthesize abundant, low-cost hydrocarbons to power the global economy and lower energy costs. Its product concept combines a fleet of reactors with a chemical production pathway that uses the energy from fission to drive hydrocarbon synthesis, aiming to create a scalable, inexpensive energy and fuel supply. The company differentiates itself by pursuing an unproven commodities market tied to its reactors and hydrocarbon production, seeking to build a broad customer base across industries and economies in need of affordable energy. The short-term goal is to attract engineers and secure funding to advance development, with a longer-term objective of providing a sustainable and cost-effective energy solution at large scale.

Company size
51-200
Company stage
Series B
Total funding
$1.8B
Headquarters
El Segundo, CA
Founded
2023

Recently Posted Jobs

Explore more opportunities at Valar Atomics

See more jobs