Aumovio

Software-defined vehicles hardware and software solutions

Utility Technical Lead

Facilities ManagementConfirmed live in the last 24 hours

Full-timeGurugram, Haryana, IndiaNo salary listedIn-person

About the Job

Requirements

Bachelor of Engineering or Bachelor of Technology in Electrical Engineering or Mechanical Engineering.
10–12 years of experience in plant utilities or maintenance.
Proven experience in independent utility management, government liaison and statutory compliance, and energy or cost optimization.
Advanced knowledge of utility system fundamentals, including compressed-air system design, leak analysis, pressure optimization, cooling-tower performance, heat-load calculations, HVAC load calculations, and air balancing.
Advanced knowledge of water chemistry and treatment, including reverse osmosis and demineralization operations, scaling, dosing control, and total dissolved solids and pH optimization.
Advanced knowledge of electrical systems, including load calculations, diesel generator synchronization basics, and power-factor control.
Advanced knowledge of preventive and predictive maintenance planning, basic vibration analysis, thermography, and condition monitoring.
Advanced knowledge of utility-consumption and performance trend analysis, electrical safety, pressure systems, and chemical handling.
Should know advanced system optimization, including energy optimization, system integration, automation, building management systems, supervisory control and data acquisition, and internet-of-things monitoring.
Should know utilities design and sizing, including compressor sizing, piping networks, pressure-drop calculations, chiller and cooling-tower selection, and system balancing.
Should know advanced electrical topics, including load-flow concepts, high- and low-tension systems, and reliability planning.
Should know water-treatment expertise, including chemical-dosing strategies for corrosion, scaling, and biological control, plus effluent management and reuse strategies.
Should know reliability engineering, including failure mode and effects analysis, reliability-centered maintenance, and lifecycle costing.
Should know statutory norms covering pollution control, electricity, and boiler laws.
Should know project management, including capital-expenditure planning, return-on-investment evaluation, and supplier technical validation.
Should know digital transformation through data-driven optimization using dashboards and predictive analytics.
Electrical-safety-handling or ESH-governance certifications are a plus.

Responsibilities

Lead the planning, operation, optimization, and statutory compliance of all plant utilities while ensuring reliability, cost efficiency, sustainability, and coordination with government authorities.
Ensure 100% utility availability with no impact on production, drive uptime improvement and system stabilization, monitor critical parameters, and implement control strategies.
Own preventive, predictive, and condition-based maintenance; lead root-cause analysis using 5 Why, Fishbone, FMEA, and A3 analysis; improve mean time between failures and reduce repeat failures.
Own compressed-air systems; cooling towers and chilled-water systems; HVAC and ventilation, including air-handling units; water treatment, including reverse osmosis, demineralization, softeners, and chemical dosing; and electrical systems, including transformers, diesel generators, panels, UPS, servo systems, low- and high-tension systems, and open access.
Drive the plant energy-efficiency roadmap, optimize consumption, reduce costs, and lead water-reuse, energy-reduction, and decarbonization initiatives.
Serve as the single point of contact with the Pollution Control Board, Electrical Inspectorate, Haryana State Pollution Control Board, waste-management authorities, Fire and Safety Department, and local municipal, water, and HSIDC authorities.
Manage licenses, renewals, statutory documentation, inspections, audits, compliance closure, environmental reporting on water discharge and emissions, and approvals for new installations or expansions; ensure zero regulatory non-compliance risk.
Ensure compliance with ESH standards and regulatory norms; implement lockout/tagout, permit-to-work, and confined-space practices; support ESH audits and a zero-incident culture; and support sustainability initiatives with the ESH team.
Manage vendors, annual maintenance and comprehensive maintenance contracts, and service providers; validate technical solutions and execution quality; ensure cost and safety compliance.
Develop utility dashboards and key performance indicators, implement internet-of-things and automated monitoring systems, and drive data-driven decision-making.
Lead capital-expenditure and utility-improvement projects, drive Six Sigma and Kaizen initiatives, and support plant expansion and infrastructure projects.
Ensure appropriate workplace environmental conditions and support facility maintenance and future expansion planning.
Coordinate with Production, Facility, HR, ESH, Projects, Finance, test labs, and government authorities.

Desired Qualifications

Add-on certifications in Electrical Safety Handling or ESH Governance are a plus.

Job Description

🔹 Role Purpose

Lead the planning, operation, optimization, and statutory compliance of all plant utilities while ensuring high reliability, cost efficiency, sustainability, and seamless coordination with government authorities.

🔹 Key Responsibilities

1. Utility Operations & Reliability Leadership

Ensure 100% utility availability with zero impact on production
Drive uptime improvement actions and system stabilization
Monitor critical parameters and implement control strategies

2. Maintenance & Reliability Engineering

Own Preventive, Predictive, and Condition-Based Maintenance (CBM)
Lead advanced RCA (5 Why, Fishbone, FMEA, A3 Analysis)
Improve MTBF and reduce repeat failures

3. Utility Systems Ownership

End-to-end responsibility for:

Compressed Air Systems
Cooling Towers & Chilled Water Systems
HVAC & Ventilation, Air Handling Units
Water Treatment (RO, DM, Softener, Chemical dosing)
Electrical Systems (Transformers, DG, Panels, UPS, Servo, LT /HT, Open Access)

4. Energy Management & Sustainability

Drive plant energy efficiency roadmap
Optimize consumption (kWh, Nm³, KL) and reduce costs
Lead sustainability initiatives (water reuse, energy reduction, decarbonization)

5. Government Liaison & Statutory Compliance

Act as single point of contact with authorities:
- Pollution Control Board
- Electrical Inspectorate (DHBVN)
- HSPCB, Waste Management
- Fire & Safety Department
- Local Municipal / Water Authorities- HSIDC
Manage:
- Licenses, renewals, and statutory documentation
- Inspections, audits, and compliance closure
- Environmental reporting (water discharge, emissions)
Obtain approvals for new installations / expansions
Ensure zero regulatory non-compliance risk

6. ESH Governance

Ensure compliance with ESH standards and regulatory norms
Implement LOTO, PTW, confined space practices
Support ESH audits and zero-incident culture
Support Sustainability initiatives along with ESH team.

7. Vendor & Contract Management

Manage vendors, AMC/ CMC contracts, and service providers
Validate technical solutions and execution quality
Ensure cost and safety compliance

8. Digitalization & Monitoring

Develop utility dashboards and KPIs
Implement IoT / automated monitoring systems
Drive data-driven decision making

9. Projects & Continuous Improvement

Lead capex and utility improvement projects
Drive Six Sigma / Kaizen initiatives
Support plant expansion and infrastructure projects

10. Facility & Infrastructure Support

Ensure proper workplace environmental conditions
Support facility maintenance and future expansion planning

🔹 Technical Knowledge Requirement (Advanced & Expert Level)

✅ Advanced Level Knowledge (Must Have)

Utility system fundamentals:
- Compressed air system design, leak analysis, pressure optimization
- Cooling tower performance, heat load calculations
- HVAC load calculations and air balancing
Water chemistry & treatment:
- RO/DM operations, scaling, dosing control, TDS/pH optimization
Electrical systems:
- Load calculations, DG synchronization basics, power factor control
Maintenance systems:
- Preventive & predictive maintenance planning
- Basic vibration, thermography, and condition monitoring
Data analysis:
- Trend analysis of utility consumption and performance
Safety systems:
- Electrical safety, pressure systems, chemical handling

✅ Expert Level Knowledge (Should Know)

Advanced system optimization:

- Energy optimization (specific energy reduction: kWh/Nm³, kW/TR)
- System integration & automation (BMS / SCADA / IoT-based monitoring)
Utilities design & sizing:
- Compressor sizing, piping networks, pressure drop calculations
- Chiller & cooling tower selection and system balancing
Advanced electrical knowledge:
- Load flow concepts, HT/LT systems, reliability planning
Water treatment expertise:
- Chemical dosing strategy (corrosion, scaling, bio-control)
- Effluent management and reuse strategies
Reliability engineering:
- FMEA, RCM (Reliability Centered Maintenance), lifecycle costing
Regulatory expertise:
- Deep understanding of statutory norms (PCB, electricity, boiler laws)
Project management:
- Capex planning, ROI evaluation, supplier technical validation
Digital transformation:
- Data-driven optimization using dashboards & predictive analytics

🔹 Key KPIs

Utility uptime (%)
Corrective & Preventive Maintenance Cost
Spare Part Management
Energy consumption per unit
Water consumption per unit
Cost savings (₹ and %)
MTBF / MTTR
Statutory compliance score (100%)
Audit observations (zero major NC)
Sustainability metrics (water reuse %, energy reduction %)

Qualifications

🔹 Education

BE/ B. Tech in Electrical / Mechanical.
Add on Certifications for Electrical Safety Handling/ ESH Governance ( Plus point)

🔹 Experience

10–12 years in plant utilities / maintenance
Proven experience in:
- Independent utility management
- Government liaison & statutory compliance
- Energy / cost optimization

Additional Information

Reporting Structure

Reports to: Plant IE Head
Interfaces with: Production, Facility , HR, ESH, Projects, Finance, Test labs Government Authorities

Ready to take your career to the next level? The future of mobility isn’t just anyone’s job. Make it yours! Join AUMOVIO. Own What’s Next.

About the Company

Aumovio

Software-defined vehicles hardware and software solutions

Aumovio provides hardware and software for software-defined vehicles (SDVs) across Autonomous Mobility, Safety and Motion, User Experience, and Architecture and Network Solutions. Its products include sensor systems, displays, braking and comfort systems, software platforms, and driver-assistance systems, plus platforms like Green Electric Caliper, Xelve, and Road to Cloud for SDVs. Born from a 2025 spin-off of Continental’s Automotive group, it operates as an independent company based in Frankfurt and serves nearly all leading automakers worldwide. The company aims to grow long-term sales beyond €24 billion and achieve an adjusted EBIT margin of 6.0–8.0%, by expanding software-enabled mobility and cloud connectivity.

Company size: 501-1,000
Company stage: IPO
Headquarters: Frankfurt, Germany
Founded: 2025

Recently Posted Jobs

Explore more opportunities at Aumovio

See more jobs