R

Rendezvous Robotics

Autonomous modular spacecraft for in-orbit assembly

RF Design Engineer

RF & Microwave EngineeringConfirmed live in the last 24 hours
Full-timeGolden, CO, USAIn-person

About the Job

Requirements

  • At least 5 years of relevant experience for the senior level.
  • A degree in electrical engineering or a related field, with RF or wireless experience matching the candidate's level.
  • Solid antenna fundamentals, including matching and voltage standing wave ratio (VSWR), radiation patterns, polarization, and the effects of mounting structure on installed performance.
  • Hands-on RF measurement experience, including required vector network analyzer (VNA) work.
  • Experience building an RF link budget and closing it against real measurements.
  • In-depth knowledge of 802.11 or a comparable wireless standard at the physical (PHY) and media access control (MAC) layers.
  • Comfort working in embedded Linux.

Responsibilities

  • Own the vehicle-to-vehicle wireless chain, including the radio module, antennas, feed network, driver and firmware stack, and mesh network, from architecture through qualification and flight.
  • Develop link budgets for space-to-space and space-to-ground links.
  • Develop antennas, from trade studies through custom design, VNA tuning, chamber measurements against structural mock-ups, and flight qualification including thermal vacuum, vibration, and radiation testing.
  • Bring up and calibrate radios; enable kernel drivers in the operating system image; own radio firmware and antenna-specific per-board calibration data; and configure the system for regulatory-compliant operation in orbit.
  • Develop the network mesh, with routing above the link layer so wireless peers and wired neighbors share one routing fabric, and manage handoff to the wired network when vehicles dock.
  • Characterize measured performance, including mesh throughput, latency, and multi-peer behavior.
  • Coordinate interfaces with flight software for the pub/sub traffic carried by the link, and with avionics for the carrier board, coax routing, and antenna mechanical integration.

Desired Qualifications

  • Anechoic chamber experience.
  • Knowledge of Linux wireless internals, including mac80211, wpa_supplicant, and driver bring-up.
  • Experience with spacecraft environmental qualification, including thermal vacuum, vibration, and radiation.
  • PCB antenna design and electromagnetic simulation using HFSS, CST, or openEMS.
  • Experience with mesh or ad-hoc networking and dynamic routing protocols.
  • Experience with pub/sub middleware such as DDS and spectrum regulatory work.

About the Company

Rendezvous Robotics

Autonomous modular spacecraft for in-orbit assembly

Rendezvous Robotics designs modular spacecraft that assemble in orbit from compact, independent tiles. Each tile can autonomously maneuver, align, and connect with other tiles to form larger structures or be reconfigured for different missions. Their system enables on-orbit construction and reconfiguration rather than a single fixed spacecraft. The company differentiates itself by focusing on autonomous, in-space docking and modularity to enable scalable, reconfigurable space infrastructure, rather than traditional monolithic spacecraft. The goal is to advance next-generation modular spacecraft, demonstrate flight in space, and grow their team and capabilities through partnerships and funding.

Company size
11-50
Company stage
Seed
Total funding
$23M
Headquarters
Golden, CO
Founded
2024

Recently Posted Jobs

Explore more opportunities at Rendezvous Robotics

See more jobs