Maintenance Electrical Technician
About the job
- An Associate’s degree, a 2-year technical school degree or certification, or completion of an apprenticeship program; equivalent experience may be considered.
- A journeyman card or certification and/or 5 or more years of electrical trades maintenance work experience in a manufacturing or industrial environment.
- Strong electrical and instrumentation aptitude with experience in medium-voltage electrical systems and equipment used within heavy industrial environments.
- Ability to read electrical, instrumentation, hydraulic, and pneumatic prints.
- Ability to troubleshoot electrical problems.
- Experience with a Computerized Maintenance Management System; Ellipse experience is preferred.
- Experience with Microsoft Office, including Excel and Word.
- Ability to work under minimal supervision and effectively manage multiple or changing priorities.
- Ability to read and understand electrical and instrumentation drawing sets.
- Ability to interpret maintenance manuals.
- Ability to communicate effectively orally and in writing.
- Ability to occasionally lift up to 25 pounds.
- Mobility to climb stairs and ladders and work for long periods while standing.
- Ability to work at heights from bucket trucks and elevated work platforms.
- Willingness to work shifts.
- Current legal authorization to work in the United States on a full-time basis.
- Perform electrical preventive and corrective maintenance on processing plant equipment and supporting electrical infrastructure requiring full craftsman skill.
- Assist with and perform electrical work on low-voltage systems and instrumentation as required.
- Safely perform inspections, replacements, and repairs on a wide variety of equipment in indoor and outdoor applications within a continuously operating environment.
- Perform electrical isolation of equipment as part of lockout/tagout procedures while minimizing interference with operations.
- Receive and execute verbal and written work orders and instructions for scheduled and break-in equipment repairs.
- Determine the isolation, tools, materials, and equipment necessary to perform break-in work.
- Analyze and interpret one-line diagrams, wiring diagrams, sketches, and drawings to troubleshoot, trace, and test circuits and determine equipment replacement or repair needs.
- Inspect, repair, install, and wire electrical devices and circuits of any voltage in the plant, including power transmission lines, transformers, and related equipment.
- Work with AC and DC motors and generators, transformers, circuit breakers, rectifiers, electronic controls, control panels, starters, switches, lighting equipment, power distribution and control circuits, conduit and fittings, wire and cable, hardware, insulation, solder, and repair and replacement parts.
- Use electrical testing instruments, hand tools, and machinery to install, repair, connect, disconnect, and replace electrical systems and supporting infrastructure.
- Apply knowledge of electrical principles, wiring specification codes, material properties, equipment operation, and equipment applications.
- Dismantle, inspect, repair, adjust, and replace faulty parts and wiring on motors, generators, power distribution and control panels, circuit breakers, rectifiers, and electronic devices.
- Replace or adjust coils, resistors, rheostats, relays, contactors, bus riggings, and related components.
- Shunt defective coils, with appropriate approval, to return equipment to operation during break-in work.
- Keep tools and work areas clean and orderly.
- Prepare required reports and provide written and verbal feedback.
- Work in plant environments involving noise, dust, dirt, vibrations, and extreme climate or weather changes.
- Perform other assigned duties.
- Computerized Maintenance Management System experience, with Ellipse preferred.
About the company
Cleveland-Cliffs is a vertically integrated steel maker and iron ore producer, the largest flat-rolled steel producer in North America. It controls the full chain from iron ore mining to downstream finishing, processing, and distribution, forming a closed-loop system that secures raw-material supply and tightens cost and quality control. Its products include hot-rolled, cold-rolled, and coated steel, as well as iron ore sold to other steelmakers, with a focus on serving the North American market across automotive, infrastructure, and manufacturing sectors. Unlike many peers, Cleveland-Cliffs differentiates itself through end-to-end integration and a strong regional footprint, enabling customized solutions and reliable supply for its customers. The company aims to maintain material availability, translate supply-chain advantages into stable pricing and quality, and grow its leadership in North American steel production.
Company Size
5,001-10,000
Company Stage
IPO
Headquarters
Cleveland, Ohio
Founded
1847
Get referred to Cleveland-Cliffs
See people who can refer or advise you
Simplify's Take
What believers are saying
- DOE awarded $500 million on August 21, 2026 for Middletown Works modernization.
- Middletown's $1 billion rebuild preserves 2,300 jobs and targets first-quarter 2030 completion.
- Hamilton consolidation keeps steel output steady while shifting mix toward hotter-rolled products.
What critics are saying
- Mark Carney threatened legal action after Hamilton Works idled 500 jobs on October 9, 2026.
- Tariffs killed Hamilton cold-rolled and coated demand, forcing production into Nanticoke and raising execution risk.
- Customers rejected the green-premium strategy, exposing Cliffs to policy whiplash, carbon backlash, and margin compression.
What makes Cleveland-Cliffs unique
- Vertical integration spans ore mining, blast furnaces, rolling, finishing, and distribution across North America.
- Middletown Works produces automotive-grade flat-rolled steels for exposed vehicle parts, trucks, and SUVs.
- Cliffs retains blast-furnace scale while adding AI controls and cogeneration for lower operating costs.
Help us improve and share your feedback! Did you find this helpful?
Benefits
Health Insurance
401(k) Retirement Plan
Paid Vacation
Education Assistance
Growth & Insights and Company News
6 month growth
4%1 year growth
4%2 year growth
4%Cleveland-Cliffs is investing $200 million in the expansion of the Butler Works plant in the US. The investments are driven by growing demand for transformers. Cleveland-Cliffs, one of the largest US steel producers, is undertaking a large-scale expansion of its production of grain-oriented electrical steel (GOES) at its Butler Works plant in Pennsylvania, at a cost of $200 million. This was reported by Construction Review The project is being carried out with the support of the US Department of Energy (DOE), which has awarded a grant of $75 million. Work is scheduled to be completed in early 2028 (although the DOE's official timetables indicate 2029). At the peak of construction, around 220 construction workers will be employed. Key aspects and objectives of the project: * The modernisation will enable Butler Works to increase its production of GOES steel by up to 25 per cent. * Butler Works is the only manufacturer in the US of GOES steel, which is a key material used in the manufacture of transformer cores and power grid equipment. * The company will install four new induction reheating furnaces (manufactured in Warren, Ohio), which will replace two gas-fired furnaces. This will enable the process to be partially electrified, improve the quality of the steel, reduce losses and cut emissions during hot rolling. The rapid growth in demand for transformers and the modernisation of the US power grid are driven by infrastructure upgrades, the addition of new generation capacity and the large-scale construction of data centres, which require hundreds of megawatts of electricity. This trend is driving investment across the entire supply chain: for example, Southwire has begun expanding its campus in Starkville (Mississippi) at a cost of over $256 million to increase its output of cable and wire products. As reported by GMK Center, from 9 October, Cleveland-Cliffs is suspending part of its production capacity at the Stelco plant (Ontario, Canada) for an indefinite period. The decision is due to losses resulting from US trade tariffs and the market crisis. The cutbacks will affect 500 employees at the plant.
Ottawa gives Stelco's U.S. owner 5 days to share plan to keep jobs. Tue, October 6, 2026 at 7:56 a.m. PDT Ottawa has given the U.S. owner of Stelco five business days to share a plan to maintain jobs at the Hamilton steelmaker or face potential legal action. Ohio-based Cleveland-Cliffs said last week it plans to lay off as many as 500 workers as it idles certain steel production at Stelco, which the federal government says violates "binding commitments" made when it bought the company in 2024. In a letter to Stelco president Paul Simon on Monday, Industry Minister Mélanie Joly said Ottawa is prepared to seek a court ruling to enforce the agreement under the Investment Canada Act. "The Government of Canada takes compliance with undertakings seriously," Joly wrote in the letter, obtained by CBC News on Tuesday. "Where an investor fails to comply with an undertaking, the Act provides remedies for breaches, including an application to the superior court for orders that may include directing compliance, divestiture, or monetary penalties. "I trust that such steps will not be necessary." Cleveland-Cliffs acquired Stelco in a $3.4-billion cash-and-stock deal that, according to a news release at the time, kept "national interests at the forefront" and recognized the "importance of the workforce." According to Joly's letter, this includes "undertakings to continue to employ at least the same number of unionized employees and the vast majority of non-unionized employees as were employed when the transaction was announced." Cleveland-Cliffs CEO Lourenco Goncalves has said the cuts are necessary and justified by the Canada-U.S. trade war, arguing that Stelco's ability to sell steel to the U.S. was an "underlying condition" of the deal. Joly said the company's commitments "do not cease to apply simply because business strategy or market conditions have changed." Prime Minister Mark Carney said last week Ottawa will "use all powers that we have" against Cleveland-Cliffs as it pursues the Ohio-based company to the "fullest extent of the law." CBC News reached out to Cleveland-Cliffs for comment on Tuesday. Funding from Ontario Meanwhile, Ontario's government on Tuesday pledged to invest more than $200,000 with Ottawa through the Canada-Ontario Workforce Tariff Response to help protect steel and manufacturing workers in the Hamilton area. The funding will help 75 workers and jobseekers upgrade their skills and transition to in-demand careers, according to the province's minister of labour, immigration, training and skills development. "Ontario is fighting back against President Trump's attacks on our economy by helping our workers retrain, upskill, and stay competitive," Trevor Jones said in a statement. Goncalves has expressed support for Trump's Section 232 measures, which put up to 50 per cent tariffs on steel and aluminum imports from Canada. Goncalves has said he supports Canadian steel workers, and that "America first is not America only." Last Monday, amid news of the Stelco layoffs, Trump touted a $15-billion US investment plan by Minnesota-based steelmaker Mesabi Metallics to build a massive plant in Iowa as evidence that his administration's tariffs on imported steel are working as intended.
Cleveland-Cliffs is investing $200 million to expand grain-oriented electrical steel production at its Butler Works facility in Pennsylvania. The project is supported by a $75 million award from the US Department of Energy. The expansion will increase production capacity by up to 25% at Butler Works, which Cleveland-Cliffs identifies as the only US producer of grain-oriented electrical steel. This specialised material is used to manufacture transformer cores, essential components for moving electricity across the grid. The project includes installing four new induction reheat furnaces to replace two existing natural-gas-fired furnaces. Cleveland-Cliffs expects the upgrades to improve steel quality, reduce production losses, and increase operating efficiency whilst electrifying part of the steelmaking process. The expansion is expected to support approximately 220 construction jobs at peak and reach completion in early 2028.
Stelco's owner says 'significant' number of laid-off Hamilton workers will land at Nanticoke mill. The union is skeptical. Lake Erie Works only has 20 open positions for the roughly 450 steelworkers soon to be out of a job, union boss says. Make Hamilton Naval a preferred source on Google Stelco's U.S.-based parent company Cleveland-Cliffs says a "significant" number of the roughly 350 Hamilton steelworkers set to be laid off on Oct. 9 could transfer to the company's Nanticoke steelworks, as Stelco concentrates steel production in Haldimand County. But the union boss at Nanticoke says that plan doesn't add up. J.P. Antonacci's journalism is partially funded by the Canadian government through its Local Journalism Initiative. [email protected]
Canadian Prime Minister Mark Carney has threatened legal action against Cleveland-Cliffs after the Ohio-based company announced it will indefinitely idle operations at its Stelco Hamilton Works plant in Ontario. The decision, attributed to US tariffs, will impact up to 500 employees when operations wind down on 9 October. Cleveland-Cliffs acquired Stelco for $2.4 billion in 2024 under a five-year contract requiring it to maintain headquarters in Hamilton and preserve 1,000 jobs. Carney accused the company of betraying Canadian workers and said the federal government has offered financial assistance to preserve jobs. Stelco said US tariffs had significantly reduced demand for its cold-rolled and galvanised products, with markets falling almost 25% in the second quarter. The company plans to consolidate production at its Nanticoke, Ontario facility.