Commercial Metals

Recycling-based steel production and fabrication

Truck Driver - Seguin, TX or Houston, TX, 1

Truck & Heavy Vehicle DrivingPosted on Nov 11

Full-timeSeguin, TX, USA

About the Job

Requirements

A valid Class A Commercial Driver License is required.
At least one year of verifiable tractor/trailer experience is required.
The driver must be knowledgeable about Department of Transportation regulations and requirements.
The candidate must have no careless, negligent, or reckless commercial motor vehicle operation violation in the previous three years.
The candidate must have no felony involving the use of a commercial motor vehicle in the previous three years.
The candidate must have no DUI or DWI within the last five years.
The candidate must have no more than one moving violation in the previous three years.
The candidate must have no on-road preventable accidents during the past three years, as shown on the Motor Vehicle Record; accidents are reviewed by CMC Logistics.
The candidate must have no excessive speeding violation, defined as 15 mph or more above the posted speed limit, in the previous three years.
The candidate must be able to work a flexible Monday-through-Friday schedule that may include out-of-state overnight stays, overtime, weekends, and holidays.
The candidate must be able to lift up to 50 pounds.

Responsibilities

Deliver products to customers, contractors, and jobsites throughout the location's geographic region.
Inspect vehicles for safety or operational defects using Department of Transportation, maintenance, and safety checklists, and ensure emergency equipment is in proper working order.
Use Electronic Logging Devices during vehicle operation; training will be provided.
Load trucks by securing chains across the width of a trailer, including on the trailer bed and in an overhead rack; tarp trailer loads; and drop and hook trailers as needed.
Perform frequent physical activities throughout the shift, including walking, climbing stairs or ladders, working with chains, dropping and hooking trailers, conducting inspections, and reaching to work with equipment.
Set up a sideboard kit around the perimeter of the trailer floor.
Demonstrate dependable attendance and work completion, and flexibility to meet business needs.
Participate in CMC Safety Programs and proactively uphold the CMC Safety Culture.
Follow safety rules and regulations and wear company-provided personal protective equipment to prevent on-the-job injuries.
Understand startup, shutdown, and emergency procedures.
Perform daily housekeeping duties, including maintaining the immediate work area.

Desired Qualifications

A high school diploma or GED is preferred.

it's what's inside that counts

_______________________________

Now Offering a $5,000 Sign-On Bonus!

There’s more to CMC than our products and the buildings, structures, and roads they go into. At CMC, it’s the people inside our recycling centers, fabrication plants, manufacturing facilities, steel mills and offices that make us who we are as a company. Our success comes from finding, retaining, and supporting the highest quality talent by offering:

Day 1 Benefits Coverage with low cost Medical, Vision, Dental
Day 1 Paid-time Off and Vacation
4.5% Company Match 401(k) plan
$500 Annual Company-paid Lifestyle Benefit
Competitive Compensation and Bonuses
Company-paid Life and Disability Insurance
Employee Stock Purchase Plan
Training and Advancement Opportunities

Why This Job

CMC provides an excellent opportunity to learn the steel, construction reinforcement and ground stabilization industries and to grow in your career. Whether you will spend your day brainstorming in an office cubicle, operating a crane, running manufacturing equipment or troubleshooting technical obstacles, at CMC, you’ll get the training and support from your team that you need to excel in your role and reach your full potential.

What You'll Do

Responsible for the delivery of products to customers, contractors, and jobsites throughout the location geographic region
Ability to inspect vehicle(s) for any safety or operational defects using DOT, maintenance, and safety checklists and ensuring emergency equipment is in proper working order
Use of Electronic Logging Devices (ELD) during operation of vehicle; driver will be trained accordingly
Loading truck may require: securing chains across the width of a trailer to secure the product, both on the bed of a trailer and in an overhead rack, tarping of loads on trailers, and dropping and hooking a trailer
Frequent physical activity such as walking, climbing stairs/ladders, works with chains, drops and hooks trailers, performs inspections and reaches to work with equipment throughout the entire shift
Set up a sideboard kit around the perimeter of the trailer floor
Demonstrates dependability in attendance, work completion, and flexibility to meet business needs
Participates in the CMC Safety Programs and proactively upholds the CMC Safety Culture
Work safely to prevent on the job injuries by following safety rules and regulations at all times including proper wearing of company PPE
Understand start up, shutdown, and emergency procedures
Responsible for daily housekeeping duties including but not limited to immediate work area

What You'll Need

Valid Class A Commercial Driver License required
Minimum 1 year verifiable tractor/trailer experience required
Driver must be knowledgeable in D.O.T. Regulations/Requirements
No violation for careless, negligent or reckless operation of a Commercial Motor Vehicle in previous 3 years
No felony involving the use of a Commercial Motor Vehicle in previous 3 years
No DUI or DWI (within the last 5 years)
No more than 1 moving violation in the previous 3 years
No on-road preventable accidents during the past (3) years as shown on the Motor Vehicle Road (MVR); accidents are reviewed by CMC Logistics
No violation for speeding excessively, 15 mph or more above the posted speed limit in previous 3 years
Must be able to work a flexible schedule Monday through Friday which includes staying out of state overnight, some overtime, weekends and holidays
Must be able to lift up to 50 lbs

Your Education

High School Diploma or GED preferred

We are CMC, a Fortune 500 company at the leading edge of our industry. Our construction reinforcement and steel products have supported construction projects and structures around the world. The secret to our success? We’ve built our legacy by assembling a team of innovators and doers to tackle some of the most challenging construction reinforcement problems facing our world for more than 100 years — and we’re just getting started.

If you’re ready to join a team working to make our industry more sustainable, support the bridges, roadways, buildings and infrastructure that connects our communities, and do meaningful work, you’re ready to join CMC. Apply today and start moving your career — and our world — forward. Let's build a better world!

CMC is committed to providing equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, age, physical or mental disability, national origin, citizenship, military or veteran status, sexual orientation, gender identity and/or expression, genetic information, or other status protected by federal, state or local law.

#LI-MR1

About the Company

Commercial Metals

Recycling-based steel production and fabrication

Commercial Metals Company (CMC) manufactures steel and metal products in a vertically integrated model that spans recycling, steel production, and fabrication. It runs recycling plants to collect and process scrap metal, which serves as the main raw material for its mills. The steel mills produce products such as rebar, merchant bar, and wire rod, which are sold mainly to the construction industry for infrastructure, commercial, and residential projects. CMC also operates fabrication facilities that customize steel products by cutting, bending, and other processing to meet customer needs. The company mainly serves customers in the United States and Europe and maintains control over the entire supply chain—from scrap sourcing to finished products—giving it cost advantages and tighter quality control over the final materials.

Company size: Not listed
Company stage: IPO
Headquarters: Irving, TX
Founded: 1915

Recently Posted Jobs

Explore more opportunities at Commercial Metals

See more jobs