IDEX
Precision engineering for health and safety
Maintenance Technician
Travel may be required.
About the job
- Five or more years of experience with manufacturing equipment and facility maintenance.
- Experience with facility systems.
- Proficiency with computers and Microsoft Office.
- Basic knowledge of ISO 9001.
- Familiarity with regulated manufacturing environments and documented quality systems, including GMP/GDP practices, standard operating procedures, SPI requirements, and internal quality procedures.
- Experience with preventive maintenance programs.
- Ability to follow detailed instructions and established procedures accurately.
- Ability to prioritize assignments and manage time effectively.
- Ability to work independently and complete tasks with minimal supervision.
- Ability to make sound decisions within assigned responsibilities.
- Ability to work effectively as part of a team.
- Maintain manufacturing equipment and facilities in support of facilities and production needs.
- Troubleshoot mechanical, software, basic electrical, and basic controls equipment issues.
- Identify and submit procurement tickets for needed spare parts.
- Serve as the primary point of contact on shift for equipment maintenance and parts replacement.
- Work with engineering and management to understand scheduled equipment maintenance needs.
- Maintain and install machine control systems as needed.
- Maintain facility systems, including HVAC, compressed air, chilled-water, and nitrogen systems.
- Work on and close out facility maintenance requests, including basic carpentry, minor plumbing, minor electrical, and mechanical tasks.
- Maintain a clean and orderly facility and workspace, and assist with cleanup after equipment malfunctions.
- Work with and schedule vendors to the site for specialized systems support.
- Support continuous improvement events and participate in team activities.
- Work with engineering and manufacturing to improve process and equipment reliability.
- Learn and work on vacuum chamber coating system equipment.
- Use Microsoft Office tools.
- Support the EH&S program by following company guidance and processes and serve as the EH&S point of contact on shift for production.
- Promote a culture of safety, quality, delivery, cost, and growth.
- Operate tools, equipment, and machinery in accordance with company policies and procedures.
- Maintain a clean and safe work area and follow established safety procedures.
- Correct unsafe conditions when possible and report hazards to management or the Safety Committee.
- Perform other duties assigned by the manager or based on business needs.
About the company
IDEX manufactures high-precision components and systems for specialized industries, including medical diagnostics, fire safety, and industrial manufacturing. Its products, such as liquid subassemblies for labs and pumps for fire trucks, work by providing exact control and measurement in environments where accuracy is critical to safety or research. Unlike competitors that focus on mass-market goods, IDEX specializes in niche markets by engineering custom solutions for highly technical problems. The company's goal is to provide reliable, engineered tools that help professionals in health, rescue, and industry perform essential tasks more effectively.
Company Size
1,001-5,000
Company Stage
IPO
Headquarters
Northbrook, Illinois
Founded
1987
Get referred to IDEX
See people who can refer or advise you
Simplify's Take
What believers are saying
- Q2 2026 sales hit $920.6 million, with record orders above $1 billion.
- Management raised 2026 organic growth guidance to 5%-6% after Q2 outperformance.
- IDEX extended its $800 million revolver to September 2031, strengthening liquidity and flexibility.
What critics are saying
- HST depends on AI data-center spending; a 2027 capex pause hits growth fast.
- Fire & Safety organic sales fell 1% in Q2 2026, exposing uneven segment demand.
- Higher employee costs lifted corporate expense in Q1 and Q2 2026, pressuring margins.
What makes IDEX unique
- IDEX’s 80/20 operating model keeps focus on niche, high-margin mission-critical components.
- Health & Science Technologies sells AI-driven data-center, semiconductor, and space-defense flow-control products.
- Fire & Safety and BAND-IT retain entrenched customer relationships across regulated, replacement-heavy markets.
Help us improve and share your feedback! Did you find this helpful?
Benefits
Health Insurance
401(k) Retirement Plan
401(k) Company Match
Paid Vacation
Growth & Insights and Company News
6 month growth
↑ 3%1 year growth
↑ 3%2 year growth
↑ 3%IDEX Corporation has amended its revolving credit facility, extending the maturity date to September 3, 2031, from the previous November 1, 2027. The facility maintains its $800 million principal amount. The agreement, finalised on September 3, 2026, allows for up to $100 million in letters of credit and $50 million in same-day swingline loans. IDEX may request additional lending commitments, capped at a $400 million increase. Bank of America serves as administrative agent, with JPMorgan Chase Bank, PNC Bank, and Wells Fargo Bank as co-syndication agents. The proceeds will fund working capital and general corporate purposes, including refinancing existing debt. The agreement includes standard covenants for senior unsecured credit facilities, featuring a quarterly-tested leverage ratio and restrictions on liens and mergers. Voluntary prepayments are permitted without penalty.
IDEX reported Q2 revenues of $920.6 million, up 6.4% year-on-year and exceeding analyst expectations by 1.7%. The company delivered a strong quarter with full-year EPS guidance surpassing forecasts and beating EBITDA estimates. IDEX achieved the highest guidance raise among gas and liquid handling stocks tracked. The stock rose 4.3% following the earnings announcement and currently trades at $234.37. The gas and liquid handling sector showed strength overall in Q2, with 11 tracked companies beating revenue consensus estimates by 2.1% on average. However, next quarter's guidance came in 0.8% below expectations. SPX Technologies led the group with revenues of $679 million, up 22.9% year-on-year, outperforming expectations by 5.8%. The stock gained 4.2% after reporting.
IDEX Corporation reported strong second quarter 2026 results, exceeding expectations with organic sales growth of 5% and adjusted earnings per share of $2.32, up 12% year-over-year. Adjusted EBITDA margin expanded 70 basis points to 28.1%. The company's performance was driven by higher volumes from growth platforms and strong operational execution. Results were modestly impacted by IEEPA tariff refunds, which slightly reduced organic growth whilst providing minor favourability to margins and earnings. President and Chief Executive Officer Eric Ashleman noted the results continued momentum established earlier in the year. The earnings call featured remarks from Ashleman and Chief Financial Officer Sean Gillen, who provided additional financial details and an updated outlook for 2026.
Idex reported Q2 2026 revenue of $920.6 million, up 6.4% year-over-year, beating the consensus estimate of $902.43 million by 2.01%. EPS came in at $2.32, compared to $2.07 in the prior-year quarter, exceeding the $2.10 estimate by 10.48%. The Health & Science Technologies segment led growth with $415 million in revenue, up 13.6% year-over-year and above the $406.67 million estimate. Fluid & Metering Technologies generated $317.1 million, whilst Fire & Safety/Diversified Products posted $189.9 million. Organic sales growth reached 5%, surpassing the 3.4% analyst estimate. Idex shares have declined 1% over the past month, compared to a 1.9% gain for the S&P 500.
Myrias Optics appoints Neil Anderson as chief revenue officer to drive global growth. July 22, 2026 Neil Anderson, Ph.D Myrias Optics has named Neil Anderson, Ph.D., as chief revenue officer, strengthening its executive leadership team as the company expands commercialization of its wafer-level metaoptics and diffractive optical technologies. Anderson will lead Myrias' global commercial strategy, overseeing sales, business development, marketing, strategic partnerships and commercial operations. The appointment comes as demand for advanced optical components accelerates across industries including artificial intelligence infrastructure, augmented and virtual reality, consumer electronics and advanced imaging. Myrias is positioning its proprietary nanoimprint manufacturing platform as a scalable approach to producing wafer-level flat optics for high-volume applications, an area gaining momentum as manufacturers seek more compact and cost-effective optical technologies. In his new role, Anderson will focus on expanding global adoption of Myrias' manufacturing platform while supporting commercialization across key growth markets, including AI data centers, consumer electronics, industrial photonics, life sciences and advanced imaging. The company believes its wafer-level production approach can help address growing demand for next-generation optical components as AI computing, immersive technologies and photonics applications continue to evolve. Anderson brings more than 15 years of commercial leadership experience in the optics and photonics industry, where he has helped bring advanced technologies from development to large-scale commercial deployment. His background spans strategic business development, go-to-market execution, customer engagement and operational leadership across global technology markets. Before joining Myrias, Anderson held senior executive roles at Gooch & Housego, quantum technology company Infleqtion and IDEX Corporation. During his career, he led global commercial organizations, developed growth strategies and built long-term partnerships with technology companies and Fortune 1000 customers. His experience covers optical components, integrated photonics, imaging technologies, photonic subsystems and advanced manufacturing serving semiconductor, data communications, aerospace and defense, medical diagnostics, life sciences, industrial sensing, quantum computing and consumer electronics markets. Chief Executive Officer John Fijol said Anderson's combination of commercial leadership and industry expertise will support Myrias' next phase of growth as it scales manufacturing and expands customer adoption worldwide. He said Anderson's experience commercializing advanced optics technologies and building enterprise partnerships will be important as the company moves from technology development toward broader market deployment. Anderson said he was attracted by Myrias' manufacturing platform and its potential to reshape production of AR waveguides and metaoptics at scale. He said the technology creates opportunities to support customers developing next-generation products in competitive global markets while accelerating adoption of flat optics across a range of emerging applications. Holding a doctorate in optical science and engineering from the Institute of Optics in Rochester, New York, along with a master's degree in physics, Anderson combines technical expertise with commercial leadership. His ability to bridge scientific research and business execution has helped companies transform advanced photonics technologies into commercially viable products and scalable businesses. The executive appointment reflects broader momentum across the optics and photonics sector, where advances in AI infrastructure, spatial computing and precision sensing are driving increased demand for high-performance optical components that can be manufactured efficiently at scale. By strengthening its commercial leadership, Myrias Optics is positioning itself to capitalize on growing interest in wafer-level optical technologies as customers seek manufacturing solutions capable of supporting next-generation devices across multiple high-growth industries.