Halo Industries

SiC wafers for high-voltage power electronics

Senior NPI Technician - Opto-electromechanical

Product AssemblyConfirmed live in the last 24 hours

Full-timeSanta Clara, CA, USA

About the Job

Requirements

An Associate of Science degree in Electrical Engineering or a related field is required; a Bachelor of Science degree in Engineering or a related field is a plus.
At least five years of assembly and test experience in the capital equipment industry is required; experience in the wafer fabrication equipment industry is preferred.
Class 4 laser and optical system experience.
Working knowledge of electrostatic discharge practices and IPC J-STD-001 and IPC-A-610 standards; certification in either IPC standard is preferred.
Experience in wafer fabrication equipment, aerospace, defense, optical, or medical equipment industries.
Experience working in a Class 100,000 cleanroom environment.
Experience setting up and running tests and experiments, and using methodical root-cause analysis methods.
Experience with Google Workspace, SolidWorks, NetSuite ERP/MRP, and Arena PLM/QMS.
Relevant certifications such as 5S, Lean, or Six Sigma.
Wire harness assembly and soldering experience, preferably with printed circuit board assemblies.
Demonstrated experience with printed circuit board-level troubleshooting, component identification, and schematic reading.
Mechanical aptitude and understanding of electromechanical assembly processes, including torque specifications, fastener selection, cable routing, and electrostatic discharge safety.
Comfort using electronic test equipment such as oscilloscopes, multimeters, electronic loads, and programmable power supplies.
Experience troubleshooting complex mechanical, opto-mechanical, and electrical systems.
Ability to write and follow standard operating procedures and work instructions.
Ability to work autonomously, manage tasks, and meet deadlines in a fast-paced environment.
Analytical and problem-solving skills, including the ability to make data-driven decisions.
Proficiency in reading mechanical and electrical drawings and schematics.
Proficiency using hand and power tools, oscilloscopes, digital voltmeters, general test equipment, and metrology tools.
Experience working with computer-aided design, enterprise resource planning, materials requirement planning, product lifecycle management, or quality management systems.
Precision measurement proficiency using calipers, micrometers, gauges, and gauge blocks.
Experience with high-precision laser and optomechanical assemblies, including building, aligning, and testing.
Working knowledge of alternating-current and direct-current power systems, piping and instrumentation diagrams, and electrical and pneumatic schematics.

Responsibilities

Build complex electromechanical, mechanical, and opto-mechanical subassemblies for prototype builds and pilot manufacturing.
Conduct module tests on electrical, mechanical, and optical systems; troubleshoot issues.
Conduct integrated-system tests, analyze results, and troubleshoot issues.
Assess environmental performance, failure modes, and real-world reliability through system testing.
Maintain accurate test records, generate detailed reports, and provide feedback on performance and recommended improvements.
Keep the floor environment safe, organized, and compliant with safety and 5S requirements.
Read and interpret electrical schematics and mechanical drawings to troubleshoot equipment.
Develop and use standard operating procedures and work instructions.
Support the engineering team with prototype builds.
Train, mentor, and support new team members as needed.
Use product lifecycle management systems such as Arena PLM/QMS to support pilot manufacturing workflows.
Identify and troubleshoot issues with test setups, hardware, and software to support smooth pilot manufacturing flows.
Support review of non-conforming parts in the material review board process, failure analysis, dispositions, and documentation of findings; triage issues and recommend next steps to keep the pilot line moving.
Perform rework such as cable crimping, soldering components, tapping threads, cleaning optics, and realigning equipment.
Use structured analysis methods to identify root causes and verify solutions.
Define, implement, and improve products, processes, and procedures.
Collaborate with research and development, manufacturing, and supply chain teams to support successful product launches.

Desired Qualifications

An Associate's degree in Electronics.
Experience in the wafer fabrication equipment, aerospace, defense, optical, or medical equipment industries.
Certification in IPC J-STD-001 and/or IPC-A-610.
Experience with Google Workspace, SolidWorks, NetSuite ERP/MRP, and Arena PLM/QMS.
Relevant certifications such as 5S, Lean, or Six Sigma.
Wire harness assembly and soldering experience, preferably with printed circuit board assemblies.

Senior NPI Technician (Opto-electromechanical)

Halo Industries, Inc. · Santa Clara, United States · Full-time · Posted 2026-10-04

Workplace: on_site

Description

The Company

Halo Industries has developed breakthrough technology to revolutionize a decades-old semiconductor material slicing process. Our laser-based solution minimizes waste, enhances material cost efficiency, and drives innovations across high-growth markets, including automotive, telecommunications, and power electronics. Founded in 2014 at Stanford University, Halo received significant funding in 2024, paving the way for rapid expansion, strategic customer engagement, and the launch of volume manufacturing.

The Opportunity

The Sr. NPI Technician (opto-electromechanical) is supporting the transition of new products from the development team to pilot manufacturing, ensuring manufacturability, quality, manufacturing process testing, and successful launch of our complex machines. This role is at the intersection of design and manufacturing and therefore involves collaboration with design, manufacturing, and quality teams to identify potential issues, develop solutions, and implement processes for a smooth New Product Introduction (NPI). This is a highly hands-on role, where you’ll work alongside hardware and software teams to build and bring up complex equipment, and develop the processes and procedures to help us scale from prototype to pilot manufacturing.

Role and Responsibilities:

Prototype Builds & Pilot Manufacturing

Assembly: Build complex electro-mechanical, mechanical, and opto-mechanical sub-assemblies.
Module Test: Conduct tests on electrical, mechanical and optical systems. Troubleshoot any issues.
Integration Test: Conduct tests on the integrated system. Analyze results and troubleshoot any issues.
System Test: Understand environmental performance, failure modes, and real-world reliability.
Documentation & Reporting: Maintain accurate records of test results, generate detailed reports, and provide feedback on performance and recommended improvements.
Organization & Cleanliness: Ensure the floor environment is safe, organized, and compliant (Safety, 5S).
Documentation: Read, interpret, troubleshoot from electrical schematics and mechanical drawings.
Procedures: Develop and use Standard Operating Procedures (SOPs) and work instructions.
Prototyping: Support the engineering team with prototype builds.
Training: Train, mentor, and support new team members as needed.
PLM: Utilize PLM systems such as Arena PLM/QMS to support efficient Pilot Manufacturing workflows.

Problem Solving & Collaboration

Problem-Solving: Identify and troubleshoot issues with test setups, hardware, and software to ensure smooth pilot manufacturing flows.
Non-Conformances: Support the review of NC parts in MRB, failure analysis, dispositions, and documentation of all findings. Triage the issues and recommend next steps to keep the pilot line moving.
Rework: This may include cable crimping, solder components, tap threads, clean optics, re-alignment, etc.
Root Cause Analysis: Use structured analysis methods to find root causes and verify solutions.
Continuous Improvements: Define, implement, and improve products, processes and procedures.
Collaboration: Work with R&D, manufacturing, and supply chain, to ensure a successful product launch.

Requirements

A.S. Electrical Engineering or related field, B.S. Engineering or related is a plus.
5+ years of assembly and test experience in the capital equipment industry, preferably WFE industry.

Preferred Qualifications

An Associate's degree in Electronics is a plus.
Class 4 Laser and optical system experience.
Working knowledge of ESD, IPC J-STD-001, and IPC-A-610 standards.
IPC J-STD-001 and/or IPC-A-610 certification.
Experience in the WFE, Aerospace, Defense, Optical or Medical equipment industries.
Experience working in at least a 100,000 Class cleanroom environment.
Experience setting up and running tests and experiments.
Experienced with methodical root cause analysis methods.
Experience with Google Workspace, SolidWorks, NetSuite ERP/MRP and Arena PLM/QMS.
Any relevant certifications like 5S, Lean, Six Sigma etc.
Detail oriented with focus on accuracy and precision during assembly, test, and documentation work.
Wire harness assembly and soldering experience, preferably with PCBAs.
Demonstrated experience with PCB-level troubleshooting, component identification, and schematic reading.
Strong mechanical aptitude and understanding of electromechanical assembly processes including torque specs, fastener selection, cable routing, and ESD safety.
Comfortable using electronic test equipment such as oscilloscopes, multimeters, electronic loads, and programmable power supplies.
Experience with troubleshooting complex mechanical, opto-mechanical and electrical systems.
Ability to write and follow standard operating procedures (SOPs) and work instructions.
Able to work autonomously, manage tasks, and meet deadlines in a fast-paced environment.
Strong analytical skills, problem-solving skills and ability to make data-driven decisions.
Proficiency in reading mechanical and electrical drawings and schematics.
Proficient in using hand and power tools, oscilloscopes, DVMs, general test and metrology tools.
Experience working with CAD/ERP/MRP/PLM/QMS systems.
Demonstrated ability to quickly grasp complex technical concepts, a proactive and independent work ethic, and an unwavering commitment to quality and safety protocols.
Proficiency in precision measurement using calipers, micrometers, gauges, gauge blocks, etc.
Excellent at learning from experts in a variety of fields (mechanical, electrical, optical, software), and growing into new areas of expertise alongside your colleagues.
Experienced with high-precision laser & optomechanical assemblies (build, align, and test).
Strong working knowledge of AC and DC power systems, P&ID, electrical and pneumatic schematics.
Strong organizational values of Integrity, Transparency, Teamwork, Fairness, Respect, Inclusivity, Ethical Conduct, Continuous Improvement, and Safety.

Benefits

Health Care Plan (Medical, Dental & Vision)
Retirement Plan (401k, IRA)
Paid Time Off (Vacation, Sick & Public Holidays)
Life Insurance (Basic, Voluntary & AD&D)
Family Leave (Maternity, Paternity)
Free Food & Snacks
Stock Option Plan
Short Term & Long Term Disability
Salary Range: $40 - $45 USD per hour

Apply

Apply at Halo Industries, Inc.

About the Company

Halo Industries

SiC wafers for high-voltage power electronics

Halo Industries produces silicon carbide (SiC) wafers using proprietary laser-based tools and processing technologies. These wafers enable the fabrication of efficient high-voltage power electronics used in sustainable electrification, including electric vehicles and renewable energy systems. The wafers are sold to semiconductor device manufacturers (B2B), and their production is designed to be more material-, energy-, and water-efficient, reducing manufacturing waste and resource use. What sets Halo Industries apart is its combination of laser-based wafer processing and a strong focus on sustainability and efficiency, aiming to deliver high-performance SiC wafers to power electronics manufacturers. The company’s goal is to support the electrification transition by supplying high-quality SiC wafers that improve manufacturing efficiency and enable advanced, energy-efficient power devices.

Company size: 51-200
Company stage: Series B
Total funding: $80M
Headquarters: Santa Clara, CA
Founded: 2014

Recently Posted Jobs

Explore more opportunities at Halo Industries

See more jobs