Senior Application Engineer - EDA

Mingjiada supply/recycling Qorvo AWMF-0108 Beamformer: 26.5-29.5 GHz 5G Millimetre wave Phased Array. Mingjiada Supplies/Recycles the AWMF-0108 Beamformer: 26.5-29.5 GHz 5G Millimetre-wave Phased Array Core IC - Product OverviewI. Product OverviewThe AWMF-0108 is a highly integrated, silicon-based quad-core beamformer IC launched by Qorvo, specifica... Mingjiada Supplies/Recycles the AWMF-0108 Beamformer: 26.5-29.5 GHz 5G Millimetre-wave Phased Array Core IC - Product Overview I. Product Overview The AWMF-0108 is a highly integrated, silicon-based quad-core beamformer IC launched by Qorvo, specifically designed for 5G millimetre-wave phased array applications. This device is one of the world's first commercial millimetre-wave 5G beamformers and served as the benchmark solution for numerous 5G R&D projects between 2016 and 2019. Shenzhen Mingjiada Electronics Co., Ltd. maintains a long-term supply of genuine, in-stock AWMF-0108 units and offers high-value buy-back services, providing reliable chip procurement and inventory management services to 5G communications equipment manufacturers, phased array antenna R&D teams and satellite communications enterprises. II. Key Technical Specifications The AWMF-0108 utilises a 48-pin, 6x6 mm QFN package, operates at a supply voltage of +1.8 V, and features ESD protection on all pins, facilitating integration into planar phased array antenna systems. Operating frequency: 26.5-29.5 GHz (covering the 3GPP n257 and n261 bands) Core architecture: Single-polarisation quad-core 4x1, supporting 4 Tx/Rx radiating elements Phase control: 5-bit (11.25° steps) Gain control: 5-bit (1 dB steps) Operating mode: Tx/Rx half-duplex, alternating transmission and reception via a single antenna Transmit gain / OP1dB: 26 dB / +9 dBm Receive gain / NF: 28 dB / 5.0 dB Supply voltage: +1.8 V III. Key Features and Technical Advantages 3.1 Precise Beam Control and Rapid Switching The AWMF-0108 incorporates 5-bit phase control and 5-bit gain control functions, supporting analogue RF beam steering. The chip is equipped with eight on-chip beam weight storage registers, enabling millisecond-level beam switching to meet the real-time requirements of 5G millimetre-wave systems for beam tracking and rapid link re-establishment. 3.2 Intelligent Temperature Management and Telemetry The device features temperature-dependent gain compensation, ensuring stable RF performance across a wide temperature range. It also supports temperature monitoring and transmit power telemetry, facilitating real-time system-level status monitoring and fault diagnosis, thereby reducing the operational and maintenance complexity of 5G base stations and terminal equipment. 3.3 High Integration and Compact Packaging Four transmit/receive channels are integrated onto a single chip, and the 6x6 mm QFN package is compatible with the typical 5.3 mm grid pitch of the 28 GHz band. This greatly simplifies the RF front-end design of millimetre-wave phased arrays, helping to reduce system costs and PCB footprint. IV. Key Application Scenarios The AWMF-0108 is a core beamforming component for building 5G millimetre-wave communication systems. Typical applications include: 5G Communications Infrastructure: 5G phased-array antenna arrays compliant with the 3GPP standards for the n257 (26.5-29.5 GHz) and n261 (27.5-28.35 GHz) frequency bands, suitable for the millimetre-wave front-ends of 5G base stations and customer premises equipment (CPE). Satellite communications (SATCOM): Ground terminals and on-board phased array systems for low-Earth orbit (LEO) satellite communications, meeting the beamforming requirements of Ka-band satellite links. Test and measurement equipment: Channel simulators, millimetre-wave test systems and phased array antenna prototype validation platforms suitable for the 5G research and development phase. V. Mingjiada Electronics Supply and Recycling Services 5.1 Long-term Supply of Genuine, In-Stock Products Established in 1996, Shenzhen Mingjiada Electronics Co., Ltd. is a globally renowned authorised independent distributor of electronic components and is certified to ISO 9001:2014 and ISO 14001:2014. The company maintains a long-term supply of genuine AWMF-0108 beamformers in stock. Leveraging a catalogue of over 2 million stock items and a global supply chain network, it offers ultra-short lead times of 1-3 days and supports the entire process from sample requests to mass production. 5.2 High-Priced Stock Buyback Mingjiada Electronics also offers high-priced buyback services worldwide for AWMF-0108 factory stock, personal stock and obsolete stock, helping customers to liquidate surplus assets and achieve the efficient recycling of electronic component resources. The range of products accepted for buyback includes RF and microwave components such as 5G chips, phased array beamforming ICs and satellite communication chips. VI. Contact Mingjiada If you have any supply, procurement or stock buy-back requirements for the AWMF-0108 beamformer, please contact Mingjiada Electronics for a real-time quotation. Mobile: +86 13410018555 Email: [email protected] News recommendation.

Skyworks Solutions (SWKS) stock jumps nearly 10% on Qorvo merger update. Tldr. Table of Contents * Shares of SWKS climbed 9.79%, finishing at $84.03 versus the previous day's close of $76.54 * Phil Brace, CEO, revealed at a Goldman Sachs investor conference that the $22 billion Qorvo acquisition is approaching its final completion phase with an anticipated year-end close * The transaction terms grant Qorvo shareholders $32.50 in cash alongside 0.960 shares of SWKS stock; existing Skyworks investors will retain approximately 63% ownership of the new combined entity * Pro-forma financials for the merged business project roughly $7.7 billion in revenue with Adjusted EBITDA reaching $2.1 billion * Third-quarter net earnings declined 67.7% compared to the prior year, dropping to $33.9 million, despite exceeding internal forecasts Skyworks Solutions experienced a robust 9.79% surge on Thursday, reaching a closing price of $84.03, following CEO Phil Brace's announcement at the Goldman Sachs Communacopia and Technology Conference in San Francisco that the pending Qorvo acquisition has entered its concluding phases. During his presentation, Brace provided assurance that the transaction remains on schedule for completion prior to the conclusion of 2026. The conference session, broadcast via webcast at 2:25 p.m. PDT, offered executives a valuable opportunity to communicate directly with the investment community during this critical juncture. The substantial price increase elevated SWKS significantly from its previous closing value of $76.54, positioning it closer to the high end of its 52-week trading range spanning $51.93 to $90.90. Shares of Qorvo experienced similar positive momentum, with QRVO advancing 6.77% during the same trading session. Transaction structure and terms. Initially unveiled in October 2025, the acquisition features a combined cash-and-equity structure totaling $22 billion in value. Under the agreement terms, each Qorvo shareholder will be entitled to receive $32.50 cash plus 0.960 shares of SWKS common stock upon deal consummation. Following the transaction's completion, existing Skyworks equity holders will maintain approximately 63% ownership of the unified organization, while Qorvo shareholders will account for the remaining 37% stake. Phil Brace is designated to serve as Chief Executive Officer of the consolidated enterprise. Bob Bruggeworth, currently serving as Qorvo's President and CEO, will transition to a board of directors position. Financial projections for the newly formed company indicate combined pro-forma revenues approaching $7.7 billion with Adjusted EBITDA of approximately $2.1 billion, positioning the entity to compete more effectively against major international semiconductor manufacturers. As the transaction progresses toward completion, Skyworks has been actively extending exchange offers related to Qorvo's existing senior note obligations. Recent quarterly performance and investor activity. Financial results for Skyworks' third fiscal quarter ending in June 2026 revealed a significant 67.7% contraction in net income, declining to $33.9 million from $105 million during the comparable year-ago period. Total net revenues experienced a 3.12% year-over-year decrease, falling to $934.8 million compared with $965 million previously. Nevertheless, Brace emphasized that these results surpassed the company's internal projections. He highlighted robust demand within mobile markets and encouraging growth across broader business segments, with particularly strong double-digit year-over-year expansion in automotive and data center verticals. Institutional investor interest has demonstrated steady momentum. Hedge fund positions in SWKS expanded 8.5% during Q2, rising to $1.517 billion from $1.397 billion in the preceding quarter, while the total count of hedge funds maintaining positions remained consistent at 35. The stock's impressive performance occurred during an otherwise challenging market environment, with the S&P 500, Nasdaq, and Dow Jones all posting losses for the session. This divergence amplified the significance of SWKS's notable advancement. Brace's remarks at the Goldman Sachs conference constitute management's latest public disclosure regarding the timeline and structural elements of the Qorvo combination. Limited Time Offer Get 3 free stock ebooks. Discover top-performing stocks in AI, Crypto, and Technology with expert analysis. * Top 10 AI Stocks - Leading AI companies * Top 10 Crypto Stocks - Blockchain leaders * Top 10 Tech Stocks - Tech giants

Modelithics releases Qorvo GaN Library v26.5.11 with new 200 W GaN model. Modelithics (R) is pleased to announce the release of the Modelithics Qorvo (R) GaN Library v26.5.11. For more than 12 years, the Modelithics Qorvo GaN Library has provided RF and microwave engineers with up-to-date, highly accurate, measurement-based nonlinear models that accelerate design cycles, improve first-pass success and reduce development costs. Developed and supported by Modelithics in close cooperation with Qorvo, the library includes nonlinear models for an extensive portfolio of Qorvo GaN die and packaged power transistor products, providing engineers with trusted models for the design and optimization of high-performance RF power amplifiers and related circuits. Each GaN model has advanced modeling features such as broadband validation, self-heating effects, temperature scalability, intrinsic I-V sensing and comprehensive model documentation. The latest release adds a nonlinear model for the QPD2562L, a 200 W GaN transistor, that is validated against load-pull measurements across multiple frequencies from 2.5 to 3.5 GHz. Version 26.5.11 also expands compatibility for all GaN models in the library to include Keysight ADS 2027, while maintaining support for ADS 2024 through ADS 2026 and multiple versions of the Cadence AWR Design Environment(R). For customers seeking a complete board-based power amplifier design solution, the Modelithics COMPLETE Library(TM) adds accurate, substrate-scalable and part-value-scalable passive component models for matching and bias networks. Customers using the Modelithics Qorvo GaN Library are encouraged to learn more about Modelithics COMPLETE Library(TM), which provides seamless access to a broad portfolio of highly accurate passive as well as active and system component level models. Together, these libraries enable designers to simulate entire RF and microwave circuits and modules with greater accuracy, helping reduce design iterations and accelerate time to market. About Modelithics, Inc. Modelithics, Inc. (www.Modelithics.com) was formed in 2001 to address the industry-wide need for high-accuracy RF and microwave active and passive simulation models for use in Electronic Design Automation (EDA). Modelithics' premium product is the Modelithics(R) COMPLETE Library, containing highly scalable Microwave Global Models(TM), and advanced behavioral models for a multitude of commercially available passive component families, as well as non-linear diode models, non-linear transistor models, and system-level component models. Modelithics' services also address a wide range of custom RF and microwave measurement and modeling needs. Modelithics product offerings, which support multiple EDA software platforms, also include the Modelithics mmWave Library, Modelithics System Components Library(TM) the Modelithics COMPLETE+3D Library. Modelithics(R) is a registered trademark of Modelithics, Inc. Microwave Global Models(TM), and System Components Library are also trademarks of Modelithics, Inc. The Modelithics Vendor Partner (MVP) Program allows for collaboration and open communication during the development of advanced data sets and models for commercially available microwave components and devices, with flexible sponsorship and distribution arrangements for the resulting data and models. An example of such an arrangement is the Modelithics Qorvo GaN Library, a fully sponsored library distributed for free by Modelithics under the sponsorship of Qorvo(R). Get in touch for orders or any queries: [email protected] / +27 21 555 8400 Courtesy of Qorvo