CSN Collision

Car collision repair network in Canada

Flat Rate Licensed Autobody Technician

Collision, Body & Glass RepairConfirmed live in the last 24 hours

Full-timeSt. Catharines, ON, CanadaCA$85k - CA$120kIn-person

About the Job

Requirements

At least 3 years of auto body repair experience is required.
An Auto Body Collision and Damage Repairer (310B) Red Seal License (310Q) is preferred but not required, or the candidate may be in a registered apprenticeship program.
I-CAR and original equipment manufacturer certifications are favorable.
I-CAR welding certification is required.
The role requires carrying, lifting up to 100 pounds, standing, sitting, walking, and reaching.
A valid driver's license is required.
Candidates must have their own tools and safety footwear.
Candidates must be able to read and understand repair estimates and automotive repair procedures.
Candidates must be able to work with metals, plastics, glass, electrical parts, and mechanical parts.
Experience using frame and measuring equipment and disassembling and reassembling vehicles is required.
Candidates must be able and willing to follow standardized production processes.
The role frequently requires bending, crouching, reaching, handling tools, and lifting materials in excess of 50 pounds.
The work may expose the technician to fumes, dirt, chemicals or toxins, hazards, heat or cold, and noise.

Responsibilities

Review work orders and repair cost estimates, and plan the work to be performed.
Thoroughly examine collision damage, inspect vehicle exterior body parts and power accessories, check the dashboard for warning lights, and identify overlooked prior damage using the quality assurance checklist or supplemental damage sheet.
Perform structural and complete body repairs, including repairing or replacing front-end components, body components, doors, frames, underbody components, interior and exterior parts, electrical components, and vehicle accessories.
Straighten bent frames using frame and underbody pulling and anchoring equipment, and remove dents, buckles, and other defects using blocks and hammers.
Weld vehicles using metal inert gas (MIG) welders and compression spot welders.
Dismantle damaged vehicle areas, including blend panel parts, to identify hidden damage early in the repair cycle; remove damaged fenders, panels, and grills, install replacement parts by bolting or welding, and repair or replace damaged windows, windshields, and sunroofs.
File, grind, and sand repaired surfaces using power tools and hand tools.
Operate soldering equipment or use plastic filler to fill holes, dents, and seams.
Follow original equipment manufacturer procedures using all data.
Inspect repaired vehicles and test-drive them to verify proper handling.
Perform other duties as assigned by management.

Desired Qualifications

I-CAR and original equipment manufacturer certifications are favorable.
An Auto Body Collision and Damage Repairer (310B) Red Seal License (310Q) is preferred but not required.

Flat Rate Licensed Autobody Technician

CSN Collision · St. Catharines, Canada · — · Posted 2026-09-02

Salary: CAD 85,000–120,000

Workplace: on_site

Department: CSN Glen-Merritt Group

Description

CSN Collision was founded in 2002 by four successful collision repair owners to help independent repair facilities improve performance through training, operational support, and marketing initiatives. Today, CSN Collision is a leading collision repair network with over 400 locations across Canada, the United States, and Italy.

In addition to its franchise network, CSN operates a growing group of corporate-owned collision repair centres across Ontario, focused on delivering safe, high-quality repairs and exceptional customer experience.

Job Summary:

CSN is looking for an Auto Body Tech to join our team. Our Auto Body Technician must be able to take a vehicle in a damaged state and repair or restore damaged vehicles to their original structural integrity, function, and appearance. The Incumbent is detailed oriented and can multitask to accommodate shifting priorities. The technician reports to the General Manager.

Primary Objectives of the Auto Body Technician:

Review work order and estimates of repair cost and plan work to be performed
Thoroughly examine collision damage (Review the complete vehicle exterior body parts, check all power accessories (door locks/windows/mirrors are operational) check that the dash panel has no warning lights on. Identify any prior damages overlooked on the QA checklist/ or related on the supplemental damage sheet.)
Performing structural and complete body repairs: Repair and replace front end components, body components, doors and frame and underbody components. (Assess, Repair or Replace interior and exterior parts, electrical components, and vehicle accessories, doors and frame and underbody components)
Straighten bent frames using frame and underbody pulling and anchoring equipment, Hammer out dents, buckles and other defects using blocks and hammers.
Welding on vehicles with the use of MIG welders and compression spot welders.
Fully dismantle the complete vehicle damaged areas including the blend panel parts in order to identify all hidden damages as early in the repair cycle as possible. For example remove damaged fenders, panels and grills using wrenches and cutting torch and bolt or weld replacement parts into place, repair or replace damaged windows, windshields and sunroof
Ability to file, grind and sand repaired surfaces, using power tools and hand tools
Operate soldering equipment or use plastic filler to fill holes, dents and seams
Follow all OEM Procedures using all data
Inspect repaired vehicles and test drive vehicles for proper handling
Technician must be able to read and understand the estimates.
Capable of reading and comprehending automotive repair procedures.
Able to work with a variety of metals and plastics, as well as glass, electrical, and mechanical parts.
Experience using frame and measuring equipment.
Experience with disassembly and reassembly of vehicles
Ability and willingness to follow standardized production processes.
Be a great CSN ambassador.
Perform other duties as assigned by management.

Requirements

Auto Body Repair experience - 3+ years required
Auto Body Collision and Damage Repairer (310B) Red Seal License (310Q) (Preferred but not a must) or in a registered apprenticeship program.
Technicians with I-Car and OEM certifications are favorable.
I car Welding certification
Carrying, Lifting – 100 lbs, standing, sitting, walking, reaching)
Valid driver's license required
Must have own tools, safety footwear.

Potential On-the-Job Exposure to the following elements:

Fumes
Dirt
Chemicals/Toxins
Hazards
Heat/Cold
Noise
Frequently required to bend, crouch, reach, handle tools and lift in excess of 50lbs of materials

Benefits

Health, dental, vision
Paid time off

Schedule: Monday to Friday

Disclaimer: This job description may not be inclusive of all assigned duties, responsibilities, or aspects of the job described, and will evolve as CSN continues to grow

CSN is an Equal Employment Opportunity employer. Qualified applicants will receive consideration for employment regardless of age, race, colour, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. We strive to cultivate an inclusive, accessible environment, where all employees and customers feel valued, respected, and supported. We are dedicated to growing our corporate team in a way that reflects the diversity of our customers and communities in which we live and serve.

If you require an accommodation for the recruitment/interview process (including alternate formats of materials, or accessible meeting rooms or other accommodation), please let us know and we will work with you to meet your needs.

Apply

Apply at CSN Collision

About the Company

CSN Collision

Car collision repair network in Canada

CSN Collision repairs vehicles across Canada, handling more than 200,000 vehicles a year through a network of over 200 collision centres. Vehicles are fixed at CSN centres by trained technicians using standardized repair methods to restore structure, paint, and finish so the car returns to a like‑new state. The company differentiates itself with its large national footprint and consistent, scalable high‑volume repair processes. Its goal is to lead the Canadian collision‑repair market by delivering reliable, high‑quality repairs that restore customers’ confidence on the road.

Company size: 51-200
Company stage: Not listed
Total funding: Not listed
Headquarters: Canada
Founded: 2002

Recently Posted Jobs

Explore more opportunities at CSN Collision

See more jobs