FOTH

Engineering, science, and technology consulting firm

Lead Electrical and Controls Engineer - Paper Industry

Controls & Automation EngineeringConfirmed live in the last 24 hours

Full-timeGreen Bay, WI, USA$110k - $140k /yr

About the Job

Requirements

A bachelor's degree in Electrical Engineering, or a two- or four-year technology degree supplemented with equivalent technical training or experience.
At least 10 years of relevant engineering/design experience with exposure to manufacturing environments, including troubleshooting complex projects.
Recent experience with industrial intelligent linear actuators and end effectors.
Recent experience integrating machine vision.
Recent experience with Rockwell ControlLogix-based PLC and FTView HMI hardware and software.
Recent experience with Rockwell PowerFlex VFDs and inverter-duty motors.
Recent experience with Rockwell Kinetix servo drives and motors.
Recent experience with Ethernet and Ethernet/IP networking.
Recent experience designing electrical system schematics and control panel layouts.
Recent experience developing construction and installation documentation.
Recent experience with sensing technologies and panel design/layout.
Recent experience producing engineering construction and bid packages in accordance with employer/client standards.
Recent experience with flow control valves, damper actuators, P&IDs, loop configurations, DCS, thermocouples, and level, flow, and temperature controls.

Responsibilities

Provide technical hardware and software design leadership for industrial projects.
Develop design packages for bid and construction.
Coordinate and execute design and programming of PLC/DCS, HMI, VFD, and servo motion projects from hardware design and software integration through construction start-up.
Coordinate electrical engineering and lead design/CAD resources.
Provide hardware and software design for machine design projects in consumer products and general industrial markets.
Assist in developing project-related documentation, including schedules, specifications, and cost estimates.
Produce project deliverables while working in a collaborative team environment.
Gather data and provide installation, start-up, and troubleshooting support.
Work simultaneously on multiple project teams and client teams.
Respond to and support project and client requests for ongoing controls troubleshooting, including ongoing support of production equipment, which may include nights and weekends.
Interface directly with clients daily to understand and respond to their needs.
Develop relationships and cultivate future work opportunities with clients and facilities as work is performed.
Travel to client sites and Foth office locations as needed, approximately 35% annually.

Desired Qualifications

A Professional Engineer (PE) license or ability to obtain one within 24 months of the start date.
Knowledge of safety standards (ISO 13849-1 and RIA 15.06) and risk assessments.
Experience with robotics, vision systems, and 3D scanners.
Experience with AutoCAD and AutoCAD Electrical.
Experience with MES/database programming, including SQL, RS-SQL, and MS Access.
Experience with polymer extrusion and/or adhesive systems.
Experience with Siemens S7 and TIA Portal PLCs and HMIs.
Experience with Siemens or Schneider/Modicon PLCs.
Experience with Siemens, CH, or Schneider HMIs.
Experience with Visual Basic, Visual Basic .NET, Visual C, C#, C++, and XML.
Experience with assembly language programming.
Experience with packaging line integration, including case packing, metal detection, palletizing, and other packaging-related equipment.
Experience in the paper/paper converting industry.
Experience with distribution and logistics technology/automation.
Experience with Delta V/Honeywell.

Salary Range: 110000 to 140000 (Currency: USD) (Pay period: per-year-salary)

Foth is a 100% member-owned science and engineering consulting firm headquartered in Wisconsin, with over 85 years of success. Our 750 members across 33 locations are dedicated to solving our clients’ toughest science and engineering challenges. Consistently ranked by Engineering News Record in the top 150 firms, we offer a values-based, collaborative, and flexible work environment with professional growth opportunities. If you thrive working alongside a smart and caring team, Foth may be the place for you.

Join our team and experience the Foth difference that contributes to our impressive 92+% member retention rate! Learn more at foth.com/careers.

Foth is currently seeking a team-focused, innovative, and results-oriented LeadElectrical and Controls Engineer who has a desire to contribute to our clients’ success and is looking for new learning experiences and opportunities for career growth. This position will be working out of our Green Bay, Wisconsin or US-Based Remote office location.

Primary Responsibilities:

Provide technical hardware and software design leadership for industrial projects
Develop design packages for bid and construction
Coordinate and execute design and programming of PLC/DCS, HMI, VFD and Servo Motion projects from hardware design and software integration through construction start-up
Coordinate electrical engineering and lead design/CAD resources
Provide hardware and software design for machine design projects in consumer products and general industrial markets
Develop design packages
Assist in the development project related documentation including schedules, specifications, and cost estimates
Produce high quality project deliverables while working in a collaborative team environment
Gather data and provide installation, start up, and troubleshooting support
Work simultaneously on multiple project teams and client teams.
Respond to and support project and client requests for on-going controls troubleshooting, including ongoing support of production equipment (may include nights and weekends)
Interface directly with client(s) on a daily basis to understand and respond to their needs
Develop relationships and cultivate future work opportunities with clients and facilities as work is performed
Travel to client sites and Foth office locations as needed for work (approximately 35% annually)

Required Qualifications:

Bachelor’s Degree in Electrical Engineering or a combination of two or four-year technology degree supplemented with equivalent technical training or experience
10+ years of relevant engineering/design experience with exposure to manufacturing environments, including troubleshooting complex projects

Required recent experience with the following:

Industrial Intelligent linear actuators and end effectors
Integration of Machine Vision
Rockwell Control Logix based PLC and FTView HMI hardware & Software
Rockwell PowerFlex VFDs and Inverter duty motors
Rockwell Kinetix Servo Drives and Motors
Ethernet and Ethernet/IP Networking
Electrical system design schematics and control panel layout design
Developing construction and installation documentation
Sensing technologies and panel design/layout
Producing engineering construction and bid packages in accordance with employer/client standards
Flow control valves, damper actuators, P&IDs, loop configurations, DCS, thermocouples, level, flow, and temperature controls

Preferred Qualifications:

Professional Engineer (PE) license or ability to obtain within 24 months of your start date
Knowledge of safety standards (ISO 13849-1 & RIA 15.06) and risk assessments

Preferred experience with the following:

Robotics, Vision Systems, 3D Scanners
AutoCad and AutoCad Electrical
MES/Database programming (SQL, RS-SQL, MS Access)
Experience with polymer extrusion and/or adhesive systems
Siemens S7 & TIA Portal PLCs and HMIs
Siemens or Schneider/Modicon PLCs
Siemens, CH or Schneider HMIs
Visual Basic, Visual Basic.NET, Visual C, C#, C++, XML
Assembly Language Programming
Packaging line integration, including; case packing, metal detection, palletizing, along with other packaging related equipment
Experience in paper/paper converting industry
Distribution and Logistics Technology/Automation
Delta V/Honeywell experience

Copy/paste the video link below in a new browser to watch/learn more about the Electrical and Controls Engineer role at Foth:

https://youtu.be/s3AbUlatbJY

All Foth Companies are equal opportunity employers, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, gender identity, sexual orientation, or any other characteristic protected by law. Qualified women, minorities, persons with disabilities, and veterans are encouraged to apply. All locations are tobacco-free. Subject to applicable state law, all applicants who have received a written offer of employment and a copy of Foth’s Drug and Alcohol-Free Workplace Program Policy, will be required to undergo testing for commonly abused controlled substances. Applicants must complete the required drug testing within two business days of offer acceptance. Foth will pay for all drug testing, which will be conducted by a licensed independent medical laboratory that follows testing requirements in accordance with applicable state law.

Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.

Notice to Third Party Recruiters/Agencies: Foth does not accept unsolicited resumes from third party recruiting firms. Absent a signed recruiting agreement coordinated through Foth, Foth reserves the right to pursue and hire candidates without financial obligation to third party recruiters or agencies.

About the Company

FOTH

Engineering, science, and technology consulting firm

Foth is an engineering and science firm serving national and international clients with services across Environment Solutions, Infrastructure Solutions, and Production Solutions. It works on projects like building infrastructure, meeting environmental regulations, and optimizing manufacturing operations, delivered by integrated teams that combine science, engineering, and client collaboration. The company differentiates itself through a long history since 1938, a client-centered approach, a network of 33 locations, and multidisciplinary experts who tailor solutions. Its goal is to act as an extension of clients' teams, offering trusted, practical advice and results with a focus on health, safety, and quality.

Company size: 501-1,000
Company stage: Not listed
Total funding: Not listed
Headquarters: Green Bay, WI
Founded: 1938

Recently Posted Jobs

Explore more opportunities at FOTH

See more jobs