Senior Advanced Manufacturing Quality Engineer
About the job
- Bachelor of Science degree in Quality, Mechanical Engineering, Electrical Engineering, or equivalent.
- At least 3 years of highly successful experience in a related field.
- Ability to travel up to 25% domestically and internationally.
- Ability to frequently stand, walk, bend, stretch, reach, and communicate effectively in the workplace.
- Ability to sit for prolonged periods and tolerate prolonged exposure to computer screens.
- Ability to repetitively use hands and fingers to operate office equipment.
- Ability to work in moderate noise, such as talking, computers, phones, and printers.
- Ability to lift up to 25 pounds at a time.
- Support development of system-level control plans and risk mitigation plans for Advanced Manufacturing Systems under the direction of senior or principal quality engineers.
- Execute design of experiments (DOEs) to support full-system statistical process control (SPC) strategies.
- Support alignment of control plan elements and processes for assigned programs, including SPC and in-process control requirements, to enable data connectivity strategy.
- Perform defect root cause analysis and support implementation of corrective actions.
- Develop and maintain Process Failure Mode and Effects Analyses (PFMEAs) for assigned manufacturing systems, identifying process risks and supporting implementation of effective prevention and detection controls.
- Plan and execute Measurement System Analyses (MSAs), including Gage Repeatability and Reproducibility (R&R) studies, to verify measurement systems are capable and suitable for process control and production release.
- Identify opportunities for process optimization to enhance efficiency and reduce defects within assigned systems.
- Support training of project quality engineering teams during system implementation.
- Provide project and production support for newly launched systems.
- Review existing process control plans and process monitoring data to support continuous improvement on assigned process steps.
- Perform other duties as assigned.
- Quality Engineering experience with battery and/or motor manufacturing processes.
- Experience with various weld methods and technologies.
- Familiarity with ISO 9001, TS 16949, or VDA 6.3 process auditing.
- Lean Manufacturing or Six Sigma Green Belt or Black Belt certification.
About the company
Milwaukee Tool makes professional-grade power and hand tools for trades, focusing on safety, productivity, and performance. It designs advanced, trade-specific solutions through global R&D in southeast Wisconsin, turning ideas into market products via fast design and partnerships with retailers. Its tools combine rugged builds, specialized features, and integrated ecosystems to help tradespeople work more efficiently and safely on site. Its goal is to empower tradespeople to excel on the job while returning home safely, by continuously delivering reliable tools and services tailored to professional users.
Company Size
5,001-10,000
Company Stage
N/A
Total Funding
N/A
Headquarters
Brookfield, Illinois
Founded
1924
Get referred to Milwaukee Tool
See people who can refer or advise you
Simplify's Take
What believers are saying
- September 30, 2026 Alliance membership deepens contractor relationships and workforce pipeline credibility.
- September 2026 launches expanded M18 TOP-OFF, NEXUS vacuums, and M12 PACKOUT pipeline camera.
- May 2026 Menomonee Falls expansion adds 50 jobs, supporting prototype testing and client demos.
What critics are saying
- Klein Tools litigation exposed Milwaukee Tool standing defects in March 2026, weakening patent enforcement.
- September 2026 product blitz tightens rivalry against DEWALT, Ryobi, and Klein across core categories.
- If premium battery and platform adoption slows, Milwaukee's ecosystem advantage erodes by 2027.
What makes Milwaukee Tool unique
- Brookfield, Wisconsin headquarters drives all global innovation, anchoring a coherent M18 and MX FUEL platform.
- Milwaukee Tool supports 16,000 apprentices annually through 1,300 training centers and 25 partners.
- PACKOUT and VACLINK create system lock-in across tools, storage, cleanup, and diagnostics.
Help us improve and share your feedback! Did you find this helpful?
Benefits
Health Insurance
Dental Insurance
Vision Insurance
Employee Assistance Program
401(k) Company Match
Education Assistance
Unlimited Paid Time Off
Paid Parental Leave
Employee Discounts
On-Site Wellness
Flexible Work Hours
Company News
Milwaukee Tool joins Alliance for America's Skilled Trades. October 1, 2026 Milwaukee Tool has announced it has joined the Alliance for America's Skilled Trades, a national effort bringing together companies committed to strengthening the skilled trades workforce and expanding pathways into rewarding careers. Milwaukee Tool joins the Alliance with a longstanding commitment to the people and organizations building the skilled trades workforce across the United States. For more than 100 years, the company has built its business around serving the professional trades, including investing in workforce development initiatives that support skilled trades education, training and career pathways. Based on investments made since 2010 and those planned through 2030, Milwaukee Tool expects its total investment in U.S. skilled trades workforce development to exceed $200 million. "Milwaukee Tool has built our business around the skilled trades, and we believe America grows when the trades grow," said Shane Moll, group president of Milwaukee Tool. "Joining the Alliance gives us another opportunity to build on the work we've been doing alongside the organizations that train and support the next generation of skilled tradespeople. We're proud to bring those relationships, our experience, and our continued investment to this effort." "When we launched the Alliance, our focus was to help people get the training and support they need to build great careers in the skilled trades," said Lisa Gevelber, founder of Grow with Google. "Milwaukee Tool has long walked the walk, supporting thousands of apprentices each year and investing deeply in local training centers across the country. Having them join this collective effort allows us to do even more for working people, including expanding access to training and opportunities they can be proud of." Today, Milwaukee Tool supports more than 16,000 apprentices annually who are actively enrolled in skilled trades programs, working alongside more than 1,300 training centers and 25 national union and non-union partners across the United States. That work is grounded in longstanding relationships with organizations throughout the skilled trades. "Developing the next generation of skilled professionals requires a sustained commitment from across our industry. Milwaukee Tool has demonstrated that commitment through its longstanding partnership with MCAA and its direct engagement with the mechanical trades. By listening to the people who perform this work every day and investing in education, training and workforce development, Milwaukee Tool is helping strengthen the skilled trades for the future," said Curtis Harbour, president, Mechanical Contractors Association of America. "Milwaukee Tool has been a longstanding and valued partner to NECA because they understand that supporting the skilled trades means investing in the people who power our industry," said David Long, CEO of the National Electrical Contractors Association. "Their commitment to listening directly to electrical contractors and the workforce, while continuing to invest in education, training and career pathways, is exactly the kind of sustained industry partnership we need to develop the next generation of skilled professionals." Through the Alliance for America's Skilled Trades, Milwaukee Tool will work alongside companies and organizations focused on increasing awareness of skilled trades careers, expanding access to training, and helping strengthen the workforce needed to support America's infrastructure and economy. Milwaukee Tool's commitment to the skilled trades is part of the company's broader investment in the United States. Over the past decade, Milwaukee Tool has invested more than $2 billion in its U.S. operations and added more than 4,000 American jobs in the past five years. All Milwaukee Tool global innovation originates from the company's headquarters in Brookfield, Wisconsin, where the company leads the development of solutions for professional tradespeople around the world. Today, Milwaukee Tool employs more than 11,000 people nationwide and operates 34 facilities across the United States, spanning manufacturing, research and development, engineering, distribution, service and corporate operations. To learn more about Milwaukee Tool's impact in the United States, visit milwaukeetool.com/company/usa-impact.
Milwaukee Tool joins Alliance for America's Skilled Trades. Based on investments made since 2010 and those planned through 2030, Milwaukee Tool expects its total investment in U.S. skilled trades workforce development to exceed $200 million. September 30, 2026 Milwaukee Tool announced it has joined the Alliance for America's Skilled Trades, a national effort bringing together companies committed to strengthening the skilled trades workforce and expanding pathways into rewarding careers. Milwaukee Tool joins the Alliance with a longstanding commitment to the people and organizations building the skilled trades workforce across the United States. For more than 100 years, the company has built its business around serving the professional trades, including investing in workforce development initiatives that support skilled trades education, training and career pathways. Based on investments made since 2010 and those planned through 2030, Milwaukee Tool expects its total investment in U.S. skilled trades workforce development to exceed $200 million. "Milwaukee Tool has built our business around the skilled trades, and we believe America grows when the trades grow," said Shane Moll, group president of Milwaukee Tool. "Joining the Alliance gives us another opportunity to build on the work we've been doing alongside the organizations that train and support the next generation of skilled tradespeople. We're proud to bring those relationships, our experience, and our continued investment to this effort." "When we launched the Alliance, our focus was to help people get the training and support they need to build great careers in the skilled trades," said Lisa Gevelber, founder of Grow with Google. "Milwaukee Tool has long walked the walk, supporting thousands of apprentices each year and investing deeply in local training centers across the country. Having them join this collective effort allows us to do even more for working people, including expanding access to training and opportunities they can be proud of." Today, Milwaukee Tool supports more than 16,000 apprentices annually who are actively enrolled in skilled trades programs, working alongside more than 1,300 training centers and 25 national union and non-union partners across the United States. That work is grounded in longstanding relationships with organizations throughout the skilled trades. "Developing the next generation of skilled professionals requires a sustained commitment from across our industry. Milwaukee Tool has demonstrated that commitment through its longstanding partnership with MCAA and its direct engagement with the mechanical trades. By listening to the people who perform this work every day and investing in education, training and workforce development, Milwaukee Tool is helping strengthen the skilled trades for the future," said Curtis Harbour, president of Mechanical Contractors Association of America. "Milwaukee Tool has been a longstanding and valued partner to NECA because they understand that supporting the skilled trades means investing in the people who power our industry," said David Long, CEO of the National Electrical Contractors Association. "Their commitment to listening directly to electrical contractors and the workforce, while continuing to invest in education, training and career pathways, is exactly the kind of sustained industry partnership we need to develop the next generation of skilled professionals." Through the Alliance for America's Skilled Trades, Milwaukee Tool will work alongside companies and organizations focused on increasing awareness of skilled trades careers, expanding access to training, and helping strengthen the workforce needed to support America's infrastructure and economy. Milwaukee Tool's commitment to the skilled trades is part of the company's broader investment in the United States. Over the past decade, Milwaukee Tool has invested more than $2 billion in its U.S. operations and added more than 4,000 American jobs in the past five years. All Milwaukee Tool global innovation originates from the company's headquarters in Brookfield, Wisconsin, where the company leads the development of solutions for professional tradespeople around the world. Today, Milwaukee Tool employs more than 11,000 people nationwide and operates 34 facilities across the United States, spanning manufacturing, research and development, engineering, distribution, service and corporate operations. To learn more about Milwaukee Tool's impact in the United States, visit milwaukeetool.com/company/usa-impact. Your Business Success Starts Here! Get the most important news and insights impacting your business.
Milwaukee power-tool batteries are finally getting the charging port they should've had years ago. Published Sep 28, 2026, 6:31 AM EDT Jonathon Jachura is a mechanical engineer with over 12 years of HVAC industry experience who specializes in translating complex home systems into practical advice for everyday homeowners. His background spans technical sales and product management for major manufacturers, combined with hands-on experience as a two-time homeowner who has tackled everything from system installations to troubleshooting repairs. Jon focuses on helping readers make confident decisions about their homes through clear, actionable guidance that saves both time and money. Every cordless tool brand charges an unspoken fee: a charger that only works with its own batteries. I've paid that fee for years on the Ryobi side, which is why Ryobi merging its 18V and 40V charging into one unit caught my attention. Milwaukee pushed the idea further with its M18 TOP-OFF Charger & Power Supply. It's a half-pound adapter that snaps onto any M18 battery and adds a USB-C port that works in both directions. Feed it from the brick already charging your laptop, and the pack fills. Pull the brick, and the pack starts feeding your phone instead. Milwaukee's red bench charger can stay in the garage. One USB-C port replaces the M18 bench charger. The bigger port charges the pack or your laptop. The 2847-20 has two USB-C ports. The 100W port is the one that runs both ways. Hook a USB-C Power Delivery (PD) charger to it and the M18 pack fills; hook a laptop to it instead and the pack drains into the laptop. The 15W port beside it is output only, meant for headlamps and earbuds. Together they deliver 115W continuously, and both can work at once, so a pack can refill while your phone charges beside it. The housing measures 3.71 by 3.04 by 1.9 inches, and Milwaukee says it's up to 65% smaller than the chargers it bundles in tool kits. It fits every M18 battery. That matters because Milwaukee's earlier TOP-OFF, the 175W model with a 120V outlet, can only drain a pack. It can't put a single watt back in. The new model drops the outlet and adds a charging circuit in its place. Your wall brick decides how fast the battery charges. The included 65W adapter is the slow lane. Inside the box sit a 65W wall adapter and a 3-foot cable good for 100W. That adapter needs 42 minutes on a 2.0Ah pack. An XC5.0 takes closer to 105, and a 12.0Ah crawls past 230. Bigger packs take proportionally longer, and Milwaukee's newer high-output packs complicate the math further, since its battery labels no longer track power the way they used to. Milwaukee sells a 120W two-port wall adapter for $79 that cuts M18 charge times by up to 30%. It pairs a 100W PD port with a 20W port, so one outlet covers the battery and a phone. You don't have to buy Milwaukee's brick, though. Any USB-C PD adapter that holds 100W continuously will charge at full speed. A small turtle icon on the TOP-OFF lights up when your adapter can't keep pace or starts throttling from heat. The 96W adapter that came with my 16-inch MacBook Pro sits just under that line, so it would work, only a bit slower. Every M18 battery doubles as a USB-C power bank. Phones, headlamps, and laptops run off the same pack. Reverse the direction and the TOP-OFF turns a tool battery into a portable charger. By Milwaukee's math, one XC5.0 refills a phone five times over, and the 100W port has the muscle to run a laptop rather than merely trickle-charge one. Everything I carry, my iPhone 16 Pro Max included, already charges over USB-C, so one cable would handle all of it. This is also why tool batteries belong in a power outage kit. Most people on a battery platform have a few charged packs sitting on a shelf and nothing to plug into them. Drop this adapter in the glove box beside them and the packs go from shelf clutter to a working power bank. Should the outage stretch past a day, a USB-C PD car charger or a folding solar panel will refill them, though not quickly. Ryobi and DeWalt owners still have to settle for less. Ryobi's version is bulkier and slower on output. Ryobi's answer exists, but it's the 18V ONE+ 150W Power Source (RYi150), and you have to buy the whole box to get USB-C charging. About $80 bare gets you a 120V outlet, two USB-A ports, and an LED task light along with it. It's a bulkier box, and Ryobi rates its fast-charging USB ports at up to 30W, well below what a laptop wants. Ryobi's USB Lithium line puts the USB-C port on the battery itself, but those are 4V packs for rotary tools and screwdrivers, not saws. DeWalt offers its own USB-C PD charging kit for 20V MAX packs. Milwaukee's TOP-OFF has flaws too. Milwaukee skipped the belt clip, the rafter hook, and even a lanyard hole, so expect it to wander around the bottom of your bag. And if your work calls for a 120V outlet, the older 175W TOP-OFF still has a place in the truck. M18 18V lithium-ion TOP-OFF Charger. * Voltage - 18 * Power Source - 100 W Charger A $119 puck makes the red charger optional. USB-C should have reached cordless tools years ago. Phones, laptops, and headphones all standardized on it, while battery platforms kept their chargers proprietary as part of the broader push to lock you into one brand's packs. The TOP-OFF doesn't end that lock-in, since your M18 packs still only fit Milwaukee tools. It does take the charger out of the equation. If you already own M18 batteries and a decent USB-C brick, $99 buys a charger, a power bank, and one less cord in the truck. I'd love to see Ryobi answer with a ONE+ version this small.
Milwaukee(R) transforms jobsite cleanup with groundbreaking NEXUS(TM) Modular Vacuum System expansion. Milwaukee Tool introduces the latest advancements in their NEXUS(TM) Modular Vacuum System, delivering groundbreaking innovations for jobsite cleanup. Article content provided by Milwaukee Tool. These revolutionary additions provide professionals across remodeling, carpentry, general contracting, mechanical, HVAC, electrical, and plumbing the ability to customize their cleanup experience. These vacuums deliver corded performance with over 40 minutes of continuous cleaning, so users can clean anywhere with no cord limitations. The system also features VACKLINK(TM) Wireless Dust Control for enhanced productivity and seamless remote activation, along with PACKOUT(TM) compatibility for unmatched versatility and mobility around the jobsite. With interchangeable motorheads for varying power, tanks for optimized holding capacity, carts for enhanced mobility, and add-on components for increased efficiency, users now have versatility in managing jobsite cleanup. Milwaukee expands their lineup with the new M18 FUEL(TM) NEXUS(TM) 6 Gallon Wet/Dry Vacuum with PACKOUT(TM) Compatibility, that delivers the power needed to tackle common jobsite debris while outperforming 3.5 Peak HP wet/dry vacuums. Equipped with a POWERSTATE(TM) Brushless Motor and REDLINK PLUS(TM) Intelligence, this vacuum delivers 95 CFM providing users with corded performance without the hassle associated with cords. With over 44 minutes of continuous cleaning on MAX RUN-TIME mode when paired with one M18(TM) REDLITHIUM(TM) FORGE(TM) HD12.0 battery pack, this vacuum can clean up to 1,800 sq ft on a single charge. Additionally, this vacuum is fully compatible with the Milwaukee PACKOUT(TM) Modular Storage System. This design enhances versatility and mobility, helping users save time both on and off the jobsite. The new M18 FUEL(TM) NEXUS(TM) 6 Gallon Wet/Dry Vacuum with PACKOUT(TM) Compatibility & VACLINK(TM) includes all the features outlined above, along with the addition of VACLINK(TM) Wireless Dust Control. This technology allows users to connect compatible VACLINK(TM) tools and vacuums, eliminating wasted runtime. The included VACLINK(TM) Remote enables users to connect this solution to non-VACLINK(TM) tools and wirelessly turn on/off the power control at the hose end of the vacuum, maximizing cleanup efficiency and reducing downtime. For users seeking enhanced performance and VACLINK(TM) capabilities, the new M18 FUEL(TM) NEXUS(TM) Dual Battery Wet/Dry Vacuum Motor Head with PACKOUT(TM) Compatibility & VACLINK(TM) is an ideal solution. This dual battery vacuum head can clean up more jobsite debris than 4.25 Peak HP wet/dry vacuums delivering corded performance to increase jobsite productivity. With two M18(TM) REDLITHIUM(TM) FORGE(TM) HD12.0 battery packs, this solution can clean up to 2,200 sq ft on a single charge with up to 49 minutes of continuous cleaning on MAX RUN-TIME mode, allowing professionals to work longer without interruptions. To further enhance the cleanup experience Milwaukee introduces the NEXUS(TM) Dedicated Debris Separator, first of its kind. This add-on component can pair with any Milwaukee NEXUS(TM) Wet/Dry Vacuum between the vacuum motor head and tank to create a fully integrated experience, eliminating the need to manage additional hoses and pieces. By directing debris away from the vacuum filter, the debris separator can separate up to 99% of jobsite debris before reaching the filter for less clogs and longer sustained airflow. This innovation helps reduce downtime and increase filter life for more productivity on jobsites. Additionally, the NEXUS(TM) Dedicated Filter Cleaner helps to bridge the gap between wet/dry vacuums and dust extractors. The filter cleaning process is fully contained for less dust exposure and allows for Table 1 OSHA compliance in light concrete applications. The filter cleaning process takes five seconds or less, resulting in less downtime than the standard filter cleaning process. This add-on component is also assembled between the vacuum motor head and tank, creating a fully integrated vacuum experience. Both NEXUS(TM) add-on components enhance the cleanup experience by increasing productivity, safety, and efficiency when cleaning up the jobsite. The NEXUS(TM) Dedicated Debris Separator and Filter Cleaner are fully compatible with existing medium capacity wet/dry vacuums. Have a question for Milwaukee Tool? Contact Milwaukee Tool here. Milwaukee Electric Tool Corporation is a manufacturer and marketer of heavy-duty, portable electric power tools and accessories and test measurement products for professional users worldwide. Sep 28, 2026 - Products & Services Update
Milwaukee Tool launches M12 PACKOUT Pipeline Inspection Camera. 28/09/2026 Milwaukee Tool has launched the M12 PACKOUT Pipeline Inspection Camera, a cordless pipe inspection system with a 23m flexible cable and 18mm HD camera head designed for plumbers, drain technicians and maintenance professionals. The system is designed to inspect 38-102mm lines, helping users identify blockages, breaks and other issues while navigating tight bends. The camera features an integrated 7" daylight-readable touchscreen with a 1280x720p display and multiple viewing angles. Zoom and pan functionality, 360° image rotation and adjustable LED lighting support detailed inspections in bright outdoor environments and low-light spaces. Users can capture photos and videos of inspections and export the footage via Micro SD card or USB-A for reporting, customer communication and job documentation. The M12 PACKOUT Pipeline Inspection Camera measures 406 x 254 x 152mm and weighs 4.6kg tool-only. Its PACKOUT compatibility allows the system to be transported as part of Milwaukee's modular storage range, while top-stack integration helps keep inspection equipment contained after use. "Pipeline inspections demand equipment that is easy to transport, fast to set up and clear enough to support confident decisions on site," Milwaukee Tool product manager Brian Atkinson says. "The M12 PACKOUT Pipeline Inspection Camera gives trade professionals a purpose-built inspection solution that fits into the way they already work, from the van to the jobsite and back again." The display is impact, debris and water-resistant, while the cordless M12 platform provides battery compatibility for users already invested in Milwaukee's 12V cordless system. "This product is about making inspections more efficient from start to finish," Brian says. "The combination of a flexible 23m cable, clear HD imaging, onboard capture and PACKOUT transport gives users the visibility and workflow they need to diagnose issues faster and communicate findings more professionally."