Circet USA

End-to-end telecom network design and deployment

Telecommunications Equipment Installer 4 Lead

Field ServiceConfirmed live in the last 24 hours

Full-timeRichmond, VA, USA

About the Job

Requirements

A high school diploma or equivalent is required; a technical or college degree is preferred.
At least six years of experience or equivalent technical skills in central office equipment or data center installation are required.
A clear understanding of AT&T, Telcordia, and/or Verizon Quality Standards is required.
Knowledge and experience with telecommunications equipment, including Dell, HP, Arista, Ciena, Fujitsu, Cisco, Calix, Adtran, Nortel, and Nokia, are required.
A background in fiber optic cable and AC/DC power installation and testing practices is required.
Proficient use of Microsoft programs and iOS and/or Android applications is required.
Ability to read and understand technical drawings and documentation is required.
Good mechanical aptitude, including use of basic power tools, is required.
Problem-solving skills, including defining problems, collecting data, establishing facts, and drawing valid conclusions, are required.
Ability to read and interpret safety rules, operating and maintenance instructions, and procedure manuals is required.
Ability to write routine reports and correspondence is required.
Ability to speak effectively before employees of the organization is required.
Ability to add, subtract, multiply, and divide in all units of measure is required.
Ability to apply common-sense understanding to carry out written, oral, or diagram-form instructions is required.
A valid driver's license with an acceptable driving record and proof of insurance is required.
Reliable transportation and ability to transport minor job-related tools and equipment to work locations are required.
Willingness to travel is required.
Ability to meet the physical demands of the job, including standing, using hands, walking, sitting, reaching, climbing or balancing, stooping, kneeling or crouching, talking, hearing, and regularly lifting 5–50 pounds and occasionally more than 50 pounds, is required.
Ability to meet the job's vision requirements, including close vision, color vision, peripheral vision, and adjusting focus, is required.

Responsibilities

Physically place, remove, or modify working and non-working equipment.
Install superstructure components supporting cabling systems, including auxiliary bars, threaded rods, cable racking, cable trays, and wire basket systems.
Cut, file, drill, and modify infrastructure components using tools such as a bandsaw, hammer drill, jigsaw, and ratchet or sockets.
Install data equipment cabinets and frames, data servers, switches, routers, repeaters, bridges, gateways, multiplexers, transceivers, and firewalls.
Make connections and terminations to BDFBs and fuse panels.
Identify, label, measure, terminate, and physically route power cables to servers, switches, and other equipment while following electrical safety standards.
Identify, label, measure, terminate, and physically route fiber optic and copper cables for high-speed data transmission, ensuring precise cable management and minimal signal loss.
Set up and install power distribution units (PDUs), ensuring redundancy and proper load balancing.
Test and document hardware and software performance characteristics and determine efficiency, reliability, and compatibility with existing systems.
Conduct fiber light meter, CAT5/6, and volt-ohm meter testing to verify levels, continuity, and termination points.
Perform advanced testing and turn-up, along with other integration activities.
Resolve equipment and technical issues as they arise.
Read, analyze, and interpret detailed specifications, drawings, blueprints, schematics, and methods of procedure (MOPs).
Perform quality validation on in-process and completed work.
Complete operations paperwork, including expense reports, timesheets, and job documentation, and provide daily job status reports as requested.
May oversee less experienced installers and assume responsibility for successful completion of installation projects.
Act as a customer contact and interface with customers and local supervisors regarding project status.
Interact with members of Installation, Engineering, and Project Management.
Adhere to, promote, and accept personal responsibility for compliance with federal and local Occupational Safety and Health regulations, industry consensus standards, and the Circet USA Injury and Illness Prevention Program Manual.
Participate in job-site safety and hazard analysis.
Perform other duties as requested.

Desired Qualifications

BICSI certification is a plus.

Company Overview

Circet USA is a leading provider of telecommunications and data center infrastructure services in North America, and we’re looking for talented professionals to join our team. We deliver comprehensive engineering, construction, and network solutions that support the evolving connectivity and infrastructure needs of our customers.

With nearly 50 years of industry experience, we partner with major telecom providers, cloud service providers, general contractors, data center operators, and utilities to design and deliver customized solutions that solve complex challenges. At Circet USA, you’ll have the opportunity to make an impact, contribute to critical infrastructure projects, and help shape the future of connectivity. If you’re passionate about innovation and thrive in a dynamic environment, we’d love to hear from you.

Job Summary and Responsibilities

SUMMARY

The Telecommunications Equipment Installer IV – Lead is responsible for the installation and maintenance of telecommunication equipment for a variety of carriers. This includes fiber, transport equipment and all critical infrastructures within a central office. This lead role will provide high-quality service in customer technical spaces including data centers, mobile telephone switch centers, central office wire centers, and designated enterprise spaces.

ESSENTIAL DUTIES & RESPONSIBILITIES include the following: Overtime and Saturday may be required based on business need. Other duties may be assigned:

Physically place, remove, or modify working and non-working equipment including the following:
Install superstructure components in support of cabling systems such as auxiliary bars, threaded rods, cable racking, cable trays, wire basket systems, etc...

Cutting, filing, drilling, modifying infrastructure components and working with various tools such as bandsaw, hammer drill, jigsaw, ratchet/sockets, etc…

Installation of data equipment cabinets and frames, data servers, switches, routers, repeaters, bridges, gateways, multiplexers, transceivers, firewalls.
Making connections terminations to BDFBs and fuse panels.
Identify, label, measure, terminate and physically route power cables to servers, switches, and other equipment, adhering to electrical safety standards.
Identify, label, measure, terminate and physically route fiber optic and copper cables for high-speed data transmission, ensuring precise cable management and minimal signal loss
Set up and install power distribution units (PDUs), ensuring redundancy and proper load balancing to prevent power issues.
Conduct testing and document performance characteristics of hardware and software; determine efficiency, reliability, and compatibility with existing system.

Conduct fiber light meter, CAT5/6 and volt ohm meter testing to ensure proper levels, continuity, and termination points.

Perform advanced test and turn-up as well as other integration activities.
Resolve equipment and technical issues as they arise.
Read, analyze, and interpret detailed specifications and drawings, blueprints, schematics, and method of procedures (MOPs)
Perform quality validation on in-process and completed work.
Complete operations paperwork (e.g., expense reports, timesheets, job documentation, etc.) including daily job status reports as requested.
May oversee the work of less experienced installers; assume responsibility for the successful completion of installation projects.
Act as a customer contact; interface with customers and local supervisors regarding project status
Interact with all members of the organization including Installation, Engineering, Project Management
Perform other duties as requested.

SAFETY DUTIES & RESPONSIBILITIES

Adhere to, promote, and accept personal responsibility for compliance to:

Federal and Local Occupational Safety and Health Regulations

Industry Consensus Standards

Circet USA Injury and Illness Prevention Program Manual

Participate in job site safety/hazard analysis

Qualifications

QUALIFICATION REQUIREMENTS

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

High school diploma or equivalent required, technical or college degree preferred.
Minimum of six years of experience or equivalent technical skills in central office equipment / data center installation
Clear understanding of AT&T, Telcordia, and/or Verizon Quality Standards.
Knowledge and experience with telecommunications equipment including Dell, HP, Arista, Ciena, Fujitsu, Cisco, Calix, Adtran, Nortel, Nokia, etc.
Background in fiber optic cable and AC/DC power installation and testing practices
Proficient use of Microsoft programs, IOS and/or Android applications.
Ability to read and understand technical drawings and documentation.
Good mechanical aptitude including usage of basic power tools.
Strong organization as well as verbal and written communication skills
Demonstrated problem-solving skills; ability to define problems, collect data, establish facts, and draw valid conclusions.
BICSI certification is a plus

LANGUAGE SKILLS

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
Ability to write routine reports and correspondence.
Ability to speak effectively before employees of the organization.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply and divide in all units of measure.

REASONING ABILITY

Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.

POSITION QUALIFICATIONS/ REQUIREMENTS

Exhibit personal power and leadership
Exhibit self-awareness
Exhibit a tendency for continuing education and self-improvement
Exhibit enthusiasm and determination
Exhibit industry awareness
Exhibit exceptional organizational skills
Exhibit the ability to live the Circet USA Values

TRAVEL

Willing to travel
Valid driver’s license with acceptable driving record and proof of insurance
Must have reliable transportation and the ability to transport minor job-related tools and equipment to work locations

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position.

While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle or feel. The employee is required to walk, sit, reach with hands and arms, climb or balance, stoop, kneel or crouch, talk and hear. The employee must regularly lift 5-50 lbs, and occasionally lift over 50 lbs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, and ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The noise level in the work environment is usually moderate.

Circet USA is an Equal Opportunity Employer - Veteran/Disabled. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by law.

Pay Range in the United States: based upon geography, skills, and experience. May also be eligible for performance incentive opportunity based on company and individual goals and performance.

About the Company

Circet USA

End-to-end telecom network design and deployment

Circet USA provides end-to-end network infrastructure services for wireline and wireless telecommunications. It designs, engineers, builds, and maintains outside plant, inside plant, data centers, and wireless environments to support fiber, 5G deployment, and data-center growth, delivering turnkey projects from concept to maintenance. By combining Circet’s global fiber construction scale with KGPCo’s North American footprint and supply-chain experience, Circet USA can tackle large-scale fiber and 5G builds across diverse clients like CSPs, MSOs, cloud providers, utilities, and municipalities. Its goal is to help customers deploy fiber, 5G, and data-center infrastructure faster by acting as a single, integrated partner for end-to-end network projects in the United States.

Company size: 501-1,000
Company stage: Not listed
Total funding: Not listed
Headquarters: Kennesaw, GA
Founded: 2022

Recently Posted Jobs

Explore more opportunities at Circet USA

See more jobs