Samsung E&A

End-to-end EPC for oil and gas

QC Inspector - Instrumentation, Telecommunication

Inspection & TestConfirmed live in the last 24 hours

Full-timeSaudi ArabiaNo salary listed

About the Job

Requirements

The candidate must have a university degree and seven years of total inspection experience, or a high school diploma and ten years of total inspection experience.
The candidate must have at least three years directly related to supervising construction activities within the contract scope, such as oil, gas and petrochemical projects, infrastructure, or communication.
The candidate must be familiar with international industry codes and standards related to intrinsically safe systems and electrical systems for instrumentation, including API RP 551, ISA RP12.6, ISA RP12.2.02, ISA TR12, ANSI MC96.1, IEEE 518, IEEE 1100, IEC 60529, NEMA ICS 6, NEMA 250, NEMA VE 1, NEMA VE 2, NFPA 70/NEC, and UL 94.
The candidate must have experience evaluating Factory Acceptance Tests.
The candidate must have working knowledge of international codes and standards related to packaged-unit instrumentation, including Distributed Control System, Supervisory Control and Data Acquisition systems, Remote Terminal Units, and Emergency Shutdown systems.
The candidate must have working knowledge of telecommunications in Outside Plant installation and Premise Distribution System installation, and familiarity with North American or international telecommunications standards, including BICSI Telecommunications Distribution Methods Manual, National Electrical Codes, and National Electrical Safety Codes, or their equivalents.
Aramco experience is required.
The candidate should have technical knowledge in a particular discipline and familiarity with related international codes and standards.
The candidate should be able to investigate and analyze quality issues based on relevant international codes and standards and suggest resolutions.
The candidate should be able to establish processes and systems using FMCS and SCMS for systematic quality control and train their operators.
The candidate should be capable of establishing and implementing a quality system for a small-scale project below 0.5 billion dollars.

Responsibilities

Plan, control, and perform inspections and tests in the assigned discipline, and manage inspectors in those disciplines in accordance with the quality management system established by the QC Manager.
Prepare quality procedures and Inspection Test Plans.
Manage work performance in the assigned discipline in accordance with applicable work processes.
Manage actual Quality Performance Indicator results.
Coordinate and monitor with other disciplines to provide required corrective actions.
Liaise with clients and resolve quality-related matters, including quality issues, non-conformity reports, and observations.
Manage work activities using FMCS and SCMS.
Submit a two-week look-ahead inspection schedule.
Review method statements prepared by site engineers.
Prepare Inspection Test Plans in accordance with project specifications and applicable standards.
Prepare inspection-request summaries and logs for Log Book Entries, Internal Non-Conformity Reports, and Non-Conformity Reports, and submit them to the QA Manager for monthly reporting.
Manage or attend as QC Supervisor at external third-party audits at 15% and 60% construction completion.
Develop and maintain inspection procedures and techniques throughout construction, pre-commissioning, and commissioning.
Ensure accurate and calibrated tools and meters are used for inspections and measurements, and report daily inspection and testing activities.
Initiate Non-Conformance Reports when project quality plans, specifications, or procedural requirements are not met.
Prepare and analyze Non-Conformance Reports in consultation with the Project Manager.
Ensure timely action on comments and complaints from contractors, consultants, and clients, and close observation reports and Non-Conformance Reports.
Initiate Corrective Action Requests and Non-Conformity Reports to prevent recurrence, and verify that corrective actions are implemented and effective before closure.
Ensure weekly and monthly QA/QC logs are prepared and reported to the Project Manager and QA/QC Manager.
Respond in writing to Corrective Action Requests and Non-compliance Reports issued by the client.
Coordinate with consultants' and contractors' QC engineers and coordinators on site inspections.
Conduct surveillance of inspection tests required by technical specifications.
Ensure required testing is performed and witnessed at sub-vendors' premises or approved independent testing laboratories.
Ensure timely inspection of materials, equipment deliveries, and completed site installations; coordinate with consultant inspectors, contractor coordinators, project and site engineers, and maintain records.
Ensure testing and measuring instruments are calibrated to applicable standards and requirements, and maintain calibration records.
Participate in QC toolbox talks and provide training to engineers and supervisors.
Participate in internal quality audits and submit reports to the QA/QC Manager.
Attend quality-related meetings with the Project Manager and team.
Prepare and review pre-commissioning procedure documents.
Implement the Contract Quality Plan, Construction Quality Procedure, and Inspection and Test Plan.
Identify and maintain quality records demonstrating specific quality requirements, maintain audit files, and include them in the monthly Quality Management Report.
Lead and supervise Quality Inspectors and subcontractor QC Inspectors.
Prepare, review, and modify look-ahead schedules for planned, critical, and complex quality activities during construction and pre-commissioning.
Maintain the monthly Quality Management Report, Construction Inspection Record Book, material preservation, handling and storage records, Project Document Control Register, and quality documents, technical specifications, and issued-for-construction drawings.

Job Description

General Characteristics (Job Summary)

Responsible for planning and controlling quality activities in given particular disciplines in accordance with quality management system established by QC Manager.
Plan, control and perform inspections and tests on discipline Responsible and managing inspectors in the disciplines for which they are Responsible.

Roles and Responsibilities

Prepare Quality Procedure and Inspection Test Plan.
Manage work performance on particular discipline as per applicable work process.
Manage actual result of Quality Performance Indicator.
Coordinate and monitor with other discipline required to provide corrective action.
Liaise and solve with clients on Quality related matters such as Quality Issue and NCR, Observation.
Manage work activity through system management tool (FMCS, SCMS).
Submit TWLA (Two week look ahead) Schedule for inspection.
Review all method of statement prepared by site engineer.
Preparation of ITP as per project Specification and applied standard.
Preparation of RFI (request for inspection) summary, LBE (Log Book Entry) log, INCR(Internal Non-Conformity Report) log. SA-NCR (Non-Conformity Report) log and submit to QA Manager for monthly report.
Managed / attended as QC Supervisor for the external 3rd party audit on 15% and 60 % of construction completion.
Develop and maintain inspection procedures and techniques, throughout the construction, precommissioning and commissioning stages.
To ensure usage of accurate and calibrated tools and meters for inspection and measurements. Report on daily inspection and testing activities.
Initiate Non-Conformance Reports in case of nonconformity to project quality plan/ the specification or procedural requirements are not met.
Preparation and analysis of Non-Conformance Report if any, in consultation with PM.
To ensure timely action of any comments/ complaints by the Contractor/ Consultants/ Client and closing of observation reports and NCRs.
To initiate Corrective Action Request (CAR), Non-Conformity Report (NCR) to prevent recurrence of Non-Conformities or Violations and to verify implementation and effectiveness of Corrective Actions before Its closure.
Ensure weekly/monthly QA/QC Logs are prepared/report to PM, QA/QC Manager.
To respond in writing to Corrective Action Request, Non-compliance Report issued by Client.
Coordination with Consultant/ Contractor’s QC Engineer / coordinators on all aspects of site inspections.
To conduct surveillance on the inspection tests required in the technical provisions of the specification.
Ensure to perform and witness testing required at sub-vendor's premises/ approved independent testing laboratory as and when required.
Ensure timely inspection of all materials/ equipment delivered and complete installations at site, coordinating with consultants inspectors, contractors coordinator, Project Engineer/Site Engineers and maintain records.
To ensure that all testing and measuring instruments are calibrated as per standards/ requirement and maintaining records of calibrations.
Participate QC tool box talk and training to Engineers and Supervisors.
Participate in Internal quality audit and submit report to QA/QC Manager.
Attend all Quality related meeting with Project Manager and Team.
Documents preparation/review for Pre-commissioning procedures.
Implementation of Contract Quality Plan (CQP) and Construction Quality Procedure (QPR), and Inspection and Test Plan (ITP).
To identify and maintain Quality Record to demonstrate specific quality requirements and Audit Files and to include it in Monthly Quality Management Report.
Lead and supervise Quality Inspectors and subcontractor’s QC Inspectors.
To prepare, review and modify look-ahead schedule of all planned, critical and complex quality activities during construction and pre-commissioning phases.
Maintain Monthly Quality Management Report, Construction Inspection Record Book (IRB), Material Preservation Handling and Storage Records, Project Document Control Register (PDCR) and quality documents (CQP/ITP/QPR/QSP), technical specification, IFC drawings.

Work Location will be Fadhili, in Saudi Arabia.

Qualifications

Experience and Education

The candidate shall have a university degree and a total of seven (7) years of experience in inspection, or a high school diploma with a total of ten (10) years of experience in inspection.
As minimum, the candidate shall have three (3) years directly relating to supervision of construction activities in the Contract Scope of WORK (e.g.; oil, gas and petrochemical projects, Infrastructure, communication).
Candidate shall be familiar with the international Industry Codes and Standards related to Intrinsically Safe Systems and Electrical Systems for Instrumentation such as; API RP 551 ISA RP12.6, ISA RP12.2.02, ISA TR12., ANSI MC96.1, IEEE 518, IEEE 1100, IEC 60529, NEMA ICS 6, NEMA 250, NEMA VE 1, NEMA VE 2, NFPA 70/NEC and UL 94.
Experience in evaluation of Factory Acceptance Test
Working knowledge of international codes and standards related to packaged units’ instrumentation such as, Distributed Control System (DCS), Supervisory Control and Data Acquisition (SCADA) Systems, Remote Terminal Unit, and Emergency Shutdown (ESD) systems.
Working knowledge of telecommunications in the field of OSP (Outside Plant) installation as well as PDS (Premise Distribution System installation, and be familiar with North American or International Telecommunications Standards; Building Industry Consulting Services International - Telecommunications Distribution Methods Manual (BICSI-TDMM); National Electrical Codes; and National Electrical Safety Codes, or their equivalents.

Key requirement

Aramco Experience is needed.
If you have SAP No. and pass the CBT, please mention it in your CV.

Knowledge

Technical knowledge in a particular discipline and familiar with related international codes and standards.
Investigate and analyze quality issues based on related international codes and standards so that suggesting resolution.
Skills enough to establish process and system to utilize FMCS and SCMS enabling systematic quality control and conduct training for its operating.
Capability of quality system establishment and implementation for small scale project (below 0.5 billion dollars).

Job Specific Specialty

ITP Study
Prevention and solving inconsistency
Pre-Inspection
RFI Management
Punch Clear Management
Punch Clear Implementation
Plant Start-Up
Operation
Maintenance
Final Handover

Competencies

Client Management
Communication
Work Proficiency
Problem solving
Documentation Control
Technical Know-how
Decision Making
Reports preparation

Additional Information

Our benefits include

Accommodation
Transportation
Flight Tickets
Medical Insurance

Samsung E&A follows fair and merit-based recruitment practices. We do not charge any fees during the recruitment process.

About the Company

Samsung E&A

End-to-end EPC for oil and gas

Samsung E&A is a global EPC (engineering, procurement, construction, and commissioning) partner in the energy sector, delivering end-to-end projects for oil and gas processing. Its offerings cover the full project lifecycle from development to operations and maintenance, using automation and advanced technologies to improve project efficiency and reliability. The company differentiates itself through its 50+ year track record, deep expertise in the GOSP (gas-oil separation plant) market, and a strong emphasis on safety and sustainability in all activities. Its goal is to lead the GOSP market by providing integrated, safe, and efficient EPC solutions that maximize value for large-scale energy projects worldwide.

Company size: 5,001-10,000
Company stage: IPO
Headquarters: Seoul, South Korea
Founded: 1970

Recently Posted Jobs

Explore more opportunities at Samsung E&A

See more jobs