FST Technical Services

Testing, inspection, certification for mission-critical facilities

QAQC Technician/NDT VT Level 2 Inspector

Inspection & TestConfirmed live in the last 24 hours

Full-timeClayton, NC, USANo salary listed

About the Job

Requirements

ASNT NDT VT Level II certification from a current or previous employer is preferred.
Current or former Certified Welding Inspector certification is preferred.
Two or more years of experience in pharmaceutical or biotechnology facilities is preferred; semiconductor or other advanced manufacturing experience will also be considered.
Experience inspecting high-purity stainless steel welds.
Additional non-destructive testing certifications in penetrant testing, magnetic particle testing, or ultrasonic testing are preferred.
Familiarity with FDA 21 CFR Part 210/211, EU GMP Annex 1, and ISPE Baseline Guides.
Ability to walk extensive distances throughout the day.
Ability to lift or carry up to 40 pounds when necessary.
Ability and comfort working at heights from ladders, scaffolding, or other lift systems; harness systems may be required at times.
Availability for extended hours, weekends, or travel may be required.
Must be authorized to work permanently in the United States; the employer is unable to sponsor.

Responsibilities

Perform Visual Testing Level II inspections on high-purity stainless steel piping, clean utilities, pressure vessels, tanks, skids, and supports.
Verify weld profiles, surface finish, alignment, fit-up, and workmanship.
Ensure compliance with project specifications.
Complete Good Manufacturing Practice-compliant inspection documentation, including inspection test records, weld logs, and non-conformance reports.
Ensure documentation is accurate, complete, and audit-ready.
Participate in system walkdowns, punch-list resolution, and audits.
Identify defects that may affect product quality, cleanability, sterility, or system integrity.
Adhere to Good Manufacturing Practice and site quality systems.

Desired Qualifications

ASNT NDT VT Level II certification from a current or previous employer.
Current or former Certified Welding Inspector certification.
Two or more years of experience in pharmaceutical or biotechnology facilities; semiconductor or other advanced manufacturing experience will also be considered.
Additional non-destructive testing certifications in penetrant testing, magnetic particle testing, or ultrasonic testing.
Familiarity with FDA 21 CFR Part 210/211, EU GMP Annex 1, and ISPE Baseline Guides.

QAQC Technician/NDT VT Level II Inspector
FST Technical Services was founded in 1984 to serve the needs of the growing, worldwide Semiconductor/Microelectronics and Life Sciences industries. We began as an independent interface between our clients and their subcontractors to establish clean installation methods that satisfied internal specifications and conformed to regulatory requirements.
We are looking for Experienced QAQC Technicians with Piping/Welding Inspection experience to join our teams in Clayton, NC! This position is a local position where we are seeking those local/commutable to the greater Clayton, NC area.
Job Summary
The QAQC Technician and/or ASNT NDT VT Level II Inspector supports pharmaceutical and biotechnology manufacturing facilities by performing Visual Testing (VT) inspections in accordance with ASME, AWS, GMP, and client-specific quality standards. The role focuses on high-purity process piping, clean utilities, pressure systems, and structural components to ensure compliance with regulatory, safety, and quality requirements.

Inspection & Testing (Pharma-Specific)

Perform VT Level II inspections on high-purity stainless steel piping (316L), clean utilities (WFI, PW, Clean Steam), pressure vessels, tanks, skids, and supports.
Verify weld profiles, surface finish, alignment, fit-up, and workmanship.
Ensure compliance with project specifications.

Documentation, GMP & Validation Support

Complete GMP-compliant inspection documentation including ITRs, weld logs, and NCRs.
Ensure documentation is accurate, complete, and audit-ready.
Participate in system walkdowns, punch list resolution, and audits.

Quality & Regulatory Compliance

Identify defects impacting product quality, cleanability, sterility, or system integrity.
Adhere strictly to GMP and site quality systems.

Preferred Qualifications

ASNT NDT VT Level II certification from current or previous employer.
CWI – current or former certification
2+ years’ experience in pharmaceutical or biotech facilities preferred. Semiconductor or other advanced manufacturing will be considered
Experience inspecting high-purity stainless steel welds.
Additional NDT certifications (PT, MT, UT).
Familiarity with FDA 21 CFR Part 210/211, EU GMP Annex 1, ISPE Baseline Guides.

Work Environment

On-site role at pharmaceutical or biotech facilities.
Outdoor work environment in varying weather conditions to be expected.
Ability to walk extensive distances throughout the day necessary
Ability to lift/carry up to 40lbs when necessary
Ability and comfort working at heights from ladders, scaffolding or other lift systems required. Harness systems may be required at times
May include extended hours, weekends, or travel.

All parties authorized to permanently work in the USA are encouraged to apply. We are unable to sponsor at this time. No third-party candidates considered for this position.

If you are looking for a professional, challenging and stimulating environment and meet the above criteria, APPLY NOW!!!

About the Company

FST Technical Services

Testing, inspection, certification for mission-critical facilities

FST Technical Services provides technical services for mission-critical facilities, including Testing, Inspection, and Certification (TICC), QA/QC, commissioning, validation, equipment services, and technical staffing. It tailors consulting and technical solutions to each client’s environment and serves as an independent liaison between clients and subcontractors to ensure installations meet internal specifications and regulatory requirements. The company differentiates itself through a focus on quality and regulatory compliance, and through acquisitions that expand calibration, life sciences consulting, and building commissioning. Its goal is to be a diversified provider of essential technical services that keep facilities safe, compliant, and reliable.

Company size: 201-500
Company stage: Not listed
Total funding: Not listed
Headquarters: Chandler, AZ
Founded: 1984

Recently Posted Jobs

Explore more opportunities at FST Technical Services

See more jobs