V

Volley Automation

Automates parking with robotic AGV storage

Senior Hardware Integration Engineer

Hardware Systems IntegrationConfirmed live in the last 24 hours
Full-timeDenver, CO, USA

About the Job

Requirements

  • A Bachelor of Science in engineering (Mechanical, Electrical, or Computer Science), or equivalent experience.
  • At least 8 years of experience developing and deploying complex electromechanical or robotic systems, including taking at least one system through field deployment.
  • Deep experience with computer-aided design tools, drawing generation, and lifecycle management.
  • Experience with configuration management best practices, processes, or systems.
  • Willingness to work in the Denver office five days a week; this is not a hybrid or remote role.
  • Demonstrated ownership of system-level architecture, including interface control documents, requirements flow-down, tolerance and error budgets, and keeping these current as the design evolves.
  • Experience as the technical owner of an outside supplier, including writing specifications, reviewing designs, defining acceptance, managing deviations or changes, and executing change management when required.
  • Ability to troubleshoot across mechanical, electrical, controls, software, and operations domains, including problems between ownership areas.
  • Experience mentoring less experienced engineers, reviewing designs or architecture decisions, and helping cross-functional groups reach decisions without formal authority.
  • Working fluency with industrial communications and controls, including Modbus, OPC UA, CAN, TCP/IP, programmable logic controllers, servo and motor drives, safety-rated input/output, and depth, vision, position, temperature, and current sensing.
  • Enough Linux and Python proficiency to analyze logs and test hypotheses, and ability to read software code.
  • Knowledge of safety and agency certification, including hazard analysis, risk assessment, functional safety concepts, and UL, IEC, ISO, and CE requirements.
  • Strong written communication for producing buildable vendor specifications and actionable test reports.

Responsibilities

  • Define and maintain subsystem interfaces, including mechanical envelopes and tolerance stack-ups, power and grounding, signal and network topology, command and state semantics, timing, and failure behavior.
  • Own interface control documents and hardware configuration management for as-built and deployed systems and systems under development.
  • Translate customer commitments, site constraints, and building code obligations into verifiable subsystem requirements, maintaining traceability from customer throughput requirements to supplier acceptance tests.
  • Own technical design work with AGV, vertical transport, charging, and controls suppliers from specification and request for quotation through design review, factory acceptance, and warranty.
  • Evaluate supplier platforms, write buildable specifications, reject nonconforming deliverables, and conduct detailed component designs or higher-level integration as required.
  • Own protocol conformance across VDA5050, Modbus, OPC UA, CAN, and vendor-specific APIs; document and contain vendor deviations at the interface boundary.
  • Define verification at the bench, supplier factory, Denver test facility, and customer site; author acceptance criteria and test plans, and judge whether results satisfy requirements.
  • Define building requirements for automated parking, including slab flatness and levelness, clearances, structural deflection, power, ventilation, and fire protection.
  • Work with architects, general contractors, and code consultants to resolve discrepancies between constructed buildings and drawings.
  • Serve as the technical authority for customer-site issues, develop solutions to contain and resolve problems, and drive resolution with supporting functions such as operations.
  • Provide technical direction and review the work of possible future engineers as the program grows; the current role remains an individual contributor.

Desired Qualifications

  • An advanced engineering degree.
  • Experience developing software with ROS or ROS2, C++, or Python.
  • AGV or AMR fleet integration experience, particularly VDA5050 or comparable interface protocols.
  • Experience with vertical transport and material handling, including VRCs, scissor lifts, conveyors, and applicable standards such as ASME B20.1, ISO 13849, and EN 14010.
  • Experience with EV charging, including automated or robotic charging, OCPP, and NFPA 70 Article 625.
  • Experience with building codes and authorities having jurisdiction, including IBC, IMC, NFPA, permit review, and alternative means and methods.
  • Experience using requirements and model-based systems engineering tools where they add value.
  • Automotive or vehicle integration, debugging, and troubleshooting experience.
  • Experience creating processes, ideally in early-stage environments where processes must be established and adopted.
  • Formal training or experience with problem-resolution processes.

About the Company

Volley Automation

Automates parking with robotic AGV storage

placeholder

Company size
11-50
Company stage
Seed
Total funding
$7.6M
Headquarters
Denver, CO
Founded
2018

Recently Posted Jobs

Explore more opportunities at Volley Automation

See more jobs