R

R.E. Mason

Controls Commissioning Technician 1

Controls & Automation EngineeringConfirmed live in the last 24 hours
Full-timeCharlotte, NC, USANo salary listed

About the Job

Requirements

  • U.S. citizenship is required.
  • Basic knowledge of electrical systems, instrumentation, industrial controls, and field commissioning practices is required.
  • Ability to read and follow P&IDs, electrical wiring diagrams, control drawings, panel drawings, and network architecture diagrams is required.
  • Basic capability in PLC I/O checkout, point-to-point verification, loop checks, and field-device troubleshooting is required.
  • Ability to safely troubleshoot 24 VDC and low-voltage control circuits is required.
  • Basic knowledge of analog signals, including 4-20 mA and 0-10 V, and digital input/output verification is required.
  • Ability to use multimeters and approved commissioning equipment to validate device operation and instrumentation accuracy is required.
  • Ability to execute assigned functional test procedures and accurately document observed equipment operation is required.
  • Ability to recognize wiring errors, device malfunctions, installation deficiencies, and communication issues and escalate findings appropriately is required.
  • Basic understanding of industrial communication networks and automation protocols is required.
  • Ability to document deficiencies, maintain punch lists, and communicate technical findings clearly is required.
  • Ability to follow direction, prioritize assigned field activities, and work within established project requirements is required.
  • Effective verbal and written communication skills are required.
  • Strong organizational skills, accountability, and attention to detail are required.
  • A professional, customer-focused approach and ability to work effectively with contractors, engineers, vendors, and customer personnel are required.
  • Commitment to safe work practices and compliance with site-specific safety requirements is required.
  • A valid driver’s license is required.
  • Ability to travel to customer sites as required is required; the position involves approximately 80–90% travel.
  • A high school diploma or GED is required.
  • Typically, 0–2 years of relevant experience in electrical controls, instrumentation, industrial automation, commissioning, or a related field is expected.
  • Proficiency with Microsoft Office applications and electronic commissioning documentation is required.
  • Physical requirements include frequently walking and inspecting active construction areas, including ladders, stairs, and uneven terrain; frequently moving through indoor and outdoor environments with exposure to heat, cold, precipitation, dust, and noise; occasionally positioning under or over equipment, including in confined spaces; occasionally lifting or moving materials up to 50 pounds; frequently wearing PPE and working in high-decibel environments; and standing, walking, sitting, kneeling, reaching overhead, climbing, pushing and pulling, lifting up to 50 pounds, using a computer and telephone, and driving.
  • Employment is contingent on successful completion of any required pre-employment and, if applicable, ongoing drug testing, including testing mandated by customer site access requirements.

Responsibilities

  • Assist with field commissioning activities, including point checkout, device verification, equipment startup support, functional testing, and issue identification.
  • Perform assigned point-to-point verification of control wiring, field devices, PLC input/output (I/O), and equipment interfaces under the direction of experienced personnel.
  • Perform basic troubleshooting of 24 VDC and low-voltage control circuits, including wiring errors, incorrect terminations, device failures, and signal abnormalities.
  • Assist with verification of analog instrumentation signals, including 4-20 mA and 0-10 V signals, and validate digital input/output operation.
  • Use approved multimeters, commissioning instruments, and calibrated test equipment to verify sensor accuracy, instrument performance, and device calibration.
  • Read and follow P&IDs, electrical wiring diagrams, control drawings, panel drawings, network architecture diagrams, and other project documentation.
  • Execute assigned loop checks, point-to-point tests, device checkout, and functional test procedures in accordance with approved commissioning plans.
  • Assist with commissioning and troubleshooting sensors, transmitters, actuators, relays, VFDs, packaged equipment, and associated control interfaces.
  • Support basic troubleshooting of industrial automation networks and protocols, including EtherNet/IP, Modbus TCP/RTU, BACnet/IP, and other applicable interfaces.
  • Verify equipment operation and control responses against approved sequences of operation and functional test procedures.
  • Identify and document deficiencies involving installation quality, wiring, instrumentation, equipment operation, and system communications.
  • Maintain test records, punch-list items, daily reports, and other commissioning documentation accurately and completely.
  • Support Level 2 (L2) installation QA/QC by reviewing control panel installation, field wiring, labeling, device installation, network connections, and other low-voltage controls installation activities.
  • Assist with identifying construction and installation deficiencies before commissioning and communicate findings to senior field or engineering personnel.
  • Support Level 3 (L3), Level 4 (L4), and Level 5 (L5) commissioning activities, including field verification, equipment startup, functional performance testing, and integrated system testing as assigned.
  • Coordinate with commissioning engineers, PLC and SCADA engineers, electrical contractors, equipment vendors, and customer representatives as directed.
  • Provide clear and timely updates regarding completed work, identified deficiencies, and technical issues requiring escalation.
  • Maintain a strong commitment to safety, quality, and customer requirements while working in active industrial and mission-critical environments.
  • Travel to customer sites to support installation QA/QC, startup, commissioning, and troubleshooting activities, approximately 80–90% of the time.

Desired Qualifications

  • Technical school training, an associate degree, military technical training, or equivalent practical experience in electrical systems, instrumentation, automation, or a related discipline is preferred.
  • Basic experience using electrical test instruments or commissioning equipment to verify control signals and device operation is preferred.
  • Exposure to PLC-based control systems and associated field instrumentation is preferred.
  • Familiarity with Allen-Bradley/Rockwell Automation, Emerson, Siemens, or other major PLC platforms is preferred.
  • Exposure to 24 VDC, 120 VAC, 4-20 mA, and 0-10 V control circuits and signals is preferred.
  • Familiarity with VFDs, motor control, packaged equipment, and equipment interface verification is preferred.
  • Familiarity with industrial communication protocols, including EtherNet/IP, Modbus TCP/RTU, and BACnet/IP, is preferred.
  • Basic understanding of industrial networking and network topologies is preferred.
  • Experience supporting installation QA/QC, field wiring verification, or construction deficiency management is preferred.
  • Exposure to L3 commissioning, L4 functional testing, or L5 integrated systems testing is preferred.
  • Ability to interpret basic sequences of operation and compare expected behavior with observed equipment operation is preferred.
  • Exposure to building management systems (BMS), electrical power monitoring systems (EPMS), SCADA platforms, or other industrial automation systems is preferred.
  • Experience in data centers, mission-critical infrastructure, industrial facilities, or other uptime-sensitive environments is preferred.
  • Familiarity with formal commissioning processes, test scripts, issue tracking, punch lists, and turnover documentation is preferred.

About the Company

Company size
Not listed
Company stage
Not listed
Total funding
Not listed
Headquarters
Not listed
Founded
Not listed

Recently Posted Jobs

Explore more opportunities at R.E. Mason

See more jobs