Broadata Communications

Manufactures fiber, HDBaseT, IP transmission solutions

Senior Electrical Engineer - Development & Test

Hardware Validation & TestingConfirmed live in the last 24 hours

Full-timeTorrance, CA, USA$125k - $150k

About the Job

Requirements

A bachelor's degree in Electrical Engineering, Computer Engineering, or a related engineering discipline is required.
At least five years of hands-on experience in electronics development, hardware validation, board bring-up, and electrical troubleshooting is required.
Experience performing board bring-up on embedded hardware platforms is required.
Experience with electrical verification and validation testing is required.
Experience debugging analog, digital, and mixed-signal electronic circuits is required.
Experience using test and measurement equipment such as oscilloscopes, logic analyzers, multimeters, spectrum analyzers, and power analyzers is required.
Understanding of automated test systems and the interaction between hardware, software, instrumentation, fixtures, and test scripts is required.
Experience troubleshooting automated test equipment and identifying root causes of test failures is required.
Ability to read and interpret schematics, datasheets, and printed circuit board layouts is required.
Experience with embedded communication protocols including I2C, SPI, UART, Ethernet, and USB is required.
Strong hands-on electrical debugging and problem-solving skills are required.
Ability to lead technical investigations and drive issues to resolution is required.
Ability to work effectively across engineering disciplines and serve as a liaison between hardware engineers, test engineers, and software developers is required.
Proficiency in Microsoft Excel and working knowledge of the Microsoft Office Suite are required.
The employee must be able to move throughout the facilities, occasionally climb stairs, bend and reach, type on a standard keyboard, use computer displays and push-button phones, and sit or stand for at least one hour and up to 12 hours a day.
The employee must be able to lift and carry up to 50 pounds unassisted.

Responsibilities

Participate in hardware development, design reviews, testing, troubleshooting, verification, and documentation of new video system designs.
Perform board bring-up, including visual inspection, power rail validation, processor initialization, memory verification, and interface testing.
Execute design verification and validation testing for new products and prototypes.
Perform electrical troubleshooting and root cause analysis using oscilloscopes, logic analyzers, multimeters, protocol analyzers, and other laboratory equipment.
Investigate and diagnose product failures during development, production testing, and field returns.
Support the development and deployment of automated test systems used in engineering validation and manufacturing.
Debug automated test system failures and determine whether issues originate from hardware, test configurations, fixtures, automation scripts, or product firmware.
Collaborate with software, firmware, FPGA, and mechanical engineering teams during product development and qualification.
Work with overseas software developers responsible for automated test scripts and provide technical guidance on hardware-related test issues.
Assist in developing and improving test fixtures, test procedures, and manufacturing test strategies.
Create engineering documentation, including test procedures, validation plans, failure analysis reports, and test results.
Participate in internal design reviews and provide feedback on electrical design robustness, manufacturability, and testability.
Collaborate with Production, Marketing, and Sales on product requirements, product releases, technical support, and testing activities.
Work on problems with defined scope, schedule, and expectations.
Perform other duties as assigned; responsibilities may change or be supplemented by a supervisor or upper management.

Desired Qualifications

Experience with Python scripting or debugging Python-based automated test scripts is preferred.
Experience with FPGA development or FPGA troubleshooting is a plus.
Experience working within ISO-regulated development environments is preferred.
Experience writing engineering test reports, validation reports, and technical documentation is preferred.
Board bring-up and hardware validation of embedded systems are preferred.
Python scripting for test automation is preferred.
FPGA development or FPGA debugging is preferred.
Experience developing manufacturing test processes and automated test equipment is preferred.
Leadership, mentorship, or technical lead experience is preferred.
Experience with medical, industrial, networking, video, or communications electronics products is preferred.

Senior Electrical Engineer – Development & Test

Broadata Communications, Inc. (BCI) – Torrance, CA
On-site

Company Overview
Broadata Communications, Inc. (BCI) is a privately held California-based corporation. BCI is a leading and innovative company specializing in the development of market-driven products for the transmission of digital multimedia (video, audio, and data) over fiber. Our clients are world leaders in their industries, spanning entertainment, broadcast, medical, professional audio/video, house of worship, education, government, military, and transportation sectors. We are ISO 13485 and ISO 9001 certified, with a strong commitment to quality, innovation, and continuous improvement.

Job Summary
We are looking for a talented and motivated Senior Electrical Engineer – Development & Test to play a key role in the development, validation, troubleshooting, and production readiness of our Pro AV products.
This position serves as the technical bridge between our electrical test and validation team and our automated test development team. The ideal candidate will have a strong electrical engineering foundation, hands-on board bring-up experience, and the ability to troubleshoot complex hardware and automated test system issues.
This is an excellent opportunity for a detail-driven engineer who enjoys hands-on hardware development, electrical debugging, and cross-functional problem solving. This critical role is based in Torrance, CA and offers a fast-paced, high-impact work environment with opportunities for professional growth and leadership within BCI. Veterans welcome!
This is a hands-on position. This is NOT a remote or hybrid position.

Key Responsibilities

Work with a team of hands-on engineers and participate in hardware development, design review, testing, troubleshooting, verification, and documentation of new video system designs.
Perform board bring-up activities including visual inspection, power rail validation, processor initialization, memory verification, and interface testing.
Execute design verification and validation (V&V) testing for new products and prototypes.
Perform electrical troubleshooting and root cause analysis using oscilloscopes, logic analyzers, multimeters, protocol analyzers, and other lab equipment.
Investigate and diagnose product failures occurring during development, production testing, and field returns.
Support the development and deployment of automated test systems used in engineering validation and manufacturing.
Debug automated test system failures and determine whether issues originate from hardware, test configurations, fixtures, automation scripts, or product firmware.
Collaborate with software, firmware, FPGA, and mechanical engineering teams during product development and qualification.
Work closely with overseas software developers responsible for automated test scripts and provide technical guidance on hardware-related test issues.
Assist in the development and improvement of test fixtures, test procedures, and manufacturing test strategies.
Create detailed engineering documentation including test procedures, validation plans, failure analysis reports, and test results.
Participate in internal design reviews and provide feedback on electrical design robustness, manufacturability, and testability.
Collaborate with Production, Marketing, and Sales for product requirements, product releases, technical support, and testing activities.
Work on problems with defined scope, schedule, and expectations.
Other responsibilities as assigned.

Job responsibilities within our organization are dynamic. This may not be a complete list of duties. Other responsibilities and duties may be assigned by your supervisor or upper management.

Education & Experience

Bachelor's degree in Electrical Engineering, Computer Engineering, or a related engineering discipline.
5+ years of hands-on experience in electronics development, hardware validation, board bring-up, and electrical troubleshooting.
Experience performing board bring-up on embedded hardware platforms.
Experience with electrical verification and validation (V&V) testing.
Experience debugging analog, digital, and mixed-signal electronic circuits.
Experience using test and measurement equipment such as oscilloscopes, logic analyzers, multimeters, spectrum analyzers, and power analyzers.
Understanding of automated test systems and the interaction between hardware, software, instrumentation, fixtures, and test scripts.
Experience troubleshooting automated test equipment and identifying root causes of test failures.
Ability to read and interpret schematics, datasheets, and PCB layouts.
Experience with common embedded communication protocols including I2C, SPI, UART, Ethernet, and USB.
Experience with Python scripting or debugging Python-based automated test scripts is preferred.
Experience with FPGA development or FPGA troubleshooting is a plus.
Experience working within ISO-regulated development environments is preferred.
Experience writing engineering test reports, validation reports, and technical documentation is preferred.

Skills & Abilities

Strong hands-on electrical debugging and problem-solving skills.
Excellent organizational skills and attention to detail.
Ability to lead technical investigations and drive issues to resolution.
Strong communication skills with the ability to work effectively across multiple engineering disciplines.
Comfortable serving as a liaison between hardware engineers, test engineers, and software developers.
Proactive and capable of managing multiple priorities while adapting to changing business needs.
Comfortable working in a fast-paced, cross-functional engineering environment.
Strong self-motivation, willingness to learn new technologies, and commitment to continuous improvement.
Proficient in Microsoft Excel and working knowledge of Microsoft Office Suite.

Preferred Requirements

Board bring-up and hardware validation of embedded systems.
Python scripting for test automation.
FPGA development or FPGA debugging.
Development of manufacturing test processes and automated test equipment.
Leadership, mentorship, or technical lead experience.
Medical, industrial, networking, video, or communications electronics products.

Physical Job Requirements
The employee in the position will be required to occasionally move throughout the facilities, including climbing stairs, when necessary. Occasional bending and reaching in an office environment, including opening and closing file cabinets drawers with light grasping. Type on a standard keyboard (laptop or desktop). Use standard computer display screens. Use standard push-button phones and must speak clearly and be understood by others. Sit or stand in a standard upright position for a minimum of one hour, but up to 12 hours a day. Be able to lift and carry weight unassisted not exceeding 50 lbs.

Compensation and Benefits

Salary Range: $125,000 - $150,000 (based on experience and qualifications)
Medical, vision and dental insurance
401(k) with company match (100% of the first 4% in eligible compensation)
Flexible Spending Account
2 weeks paid vacation
1 Week sick pay
10 company holidays
Group life insurance

About the Company

Broadata Communications

Manufactures fiber, HDBaseT, IP transmission solutions

Broadata Communications designs and builds equipment that transmits video, audio, data, and control signals over fiber, HD-BaseT, and increasingly IP networks. Its products are market-driven, aimed at delivering reliable, ready-to-use connectivity solutions for professional A/V, broadcast, medical, education, government, transportation, and other sectors. The company’s devices work by sending multiple signal types across fiber cables or HDBaseT links, and are expanding to IP-based distribution to fit modern networked environments. What sets Broadata apart is its focus on quickly bringing dependable, field-ready solutions to a wide range of high‑profile customers and industries, backed by a privately held, California-based organization with a track record across entertainment, broadcast, medical, and more. The goal is to stay at the forefront of the technology and provide dependable connectivity options that meet evolving customer needs in a timely manner.

Company size: 11-50
Company stage: Not listed
Total funding: Not listed
Headquarters: Torrance, CA
Founded: 2000

Recently Posted Jobs

Explore more opportunities at Broadata Communications

See more jobs