Metrology Engineer

1. 计量技术窗口 & 新测量系统导入与可行性评估 | Metrology Technical Interface & New Measurement System Introduction

作为蔡司计量板块专属技术窗口，负责产线测量设备、测试方法、测量程序及相关参数的导入与量产应用。主导新测量方案可行性分析、测量风险评估、精度与量程匹配、样品及治具适配，输出可执行的测量方案，确保测量结果满足客户SPEC、产品公差及量产质量控制要求。

Serve as the official metrology technical interface of ZEISS. Lead the introduction and production deployment of measurement equipment, methods, programs and parameters. Conduct measurement feasibility and risk assessments, verify accuracy, range, sample and fixture compatibility, and deliver production-ready measurement solutions compliant with customer specifications and product tolerances.

2. NPI测量方案转换 & 量产测量能力建设 | NPI Measurement Transfer & Industrialization

深度对接研发、质量与生产团队，负责将产品图纸、FAI特性、光学及几何要求转化为量产可执行的测量方法、测量程序、抽样策略及判定规则。全程支持试产、设备导入、测量方法验证、产线爬坡与量产释放，确保关键产品特性可测量、可复现、可追溯。

Collaborate closely with R&D, Quality and Production teams to translate drawings, FAI characteristics, optical and geometrical requirements into executable measurement methods, programs, sampling plans and acceptance rules. Support trial runs, equipment introduction, method validation, ramp-up and production release to ensure critical characteristics are measurable, reproducible and traceable.

3. 测量数据分析 & 测量精度持续改善 | Measurement Data Analysis & Accuracy Improvement

负责测量数据采集、统计、趋势分析以及测量系统稳定性监控，识别设备漂移、重复性不足、操作员差异、样品装夹、环境与程序参数等变异来源。运用MSA、SPC、DOE及六西格玛工具推动测量程序优化、治具改善、设备参数迭代及测量节拍优化，在保证准确度与可追溯性的前提下提升检测效率。

Own measurement data collection, statistical analysis, trend review and measurement system stability monitoring. Identify variation caused by equipment drift, repeatability, operator, fixturing, environment and program parameters. Apply MSA, SPC, DOE and Six Sigma tools to improve measurement programs, fixtures, equipment settings and inspection cycle time while maintaining accuracy and traceability.

4. 测量设备验证 & MSA/GRR体系搭建 | Measurement Equipment Validation & MSA/GRR

主导产线测量设备的首次验证、MBO、周期性再验证及变更后验证；策划并执行MSA1、MSA2、偏倚、线性、稳定性、重复性与再现性（GRR）研究，确认样品覆盖、操作员培训、随机测量顺序、测量次数、Tolerance与Nominal设置正确。负责验证异常分析、整改与关闭，并建立SOP、测量程序、点检表、校准与维护记录等标准化文件。

Lead initial qualification, machine buy-off (MBO), periodic re-validation and change validation for production measurement equipment. Plan and execute MSA1, MSA2, bias, linearity, stability and Gauge R&R studies, ensuring appropriate sample coverage, trained operators, randomized measurement order, sufficient runs, and correct tolerance and nominal settings. Own validation deviation closure and maintain SOPs, measurement programs, checklists, calibration and maintenance records.

5. 测量异常攻坚 & 风险管控 & 问题闭环 | Measurement Troubleshooting & Risk Control

负责量产阶段测量设备、测量结果及测量方法相关异常，快速区分真实产品变异与测量系统变异。运用5Why、鱼骨图、8D、FMEA等方法，联动质量、生产、设备、供应商及研发团队开展根因分析，推动校准、程序修正、治具优化、环境控制及人员培训，完成纠正预防措施闭环，避免误判、漏判及问题重复发生。

Troubleshoot measurement equipment, result and method issues during mass production, distinguishing true product variation from measurement system variation. Use 5-Why, Fishbone, 8D and FMEA with Quality, Production, Equipment, suppliers and R&D teams to drive calibration, program correction, fixture improvement, environmental control and operator training, and close corrective and preventive actions.

6. 计量目标分解 & 测量系统定期复盘 | Target Deployment & Measurement System Review

承接公司及项目级测量能力、质量与效率目标，拆解为计量设备验证、校准、GRR提升、检测节拍及数据完整性改善计划。定期复盘设备状态、MSA结果、异常趋势及改善效果，持续提升测量系统能力并保障量产质量判定可靠。

Deploy company and project-level metrology, quality and efficiency targets into executable plans covering equipment validation, calibration, GRR improvement, inspection cycle time and data integrity. Conduct regular reviews of equipment status, MSA results, issue trends and improvement effectiveness to maintain reliable production quality decisions.

Deploy company & project-level quality, yield and cost-saving targets into executable process plans. Conduct regular process review, performance evaluation and mechanism iteration to ensure KPI delivery.

7. 客户会议对接 & 内部计量技术支撑 | Customer Alignment & Internal Metrology Support

作为计量技术负责人，参与客户测量方案评审、GRR/MSA复盘、设备验证及质量审核会议。对外说明测量原理、验证逻辑、接受标准与风险控制方案；对内为质量、生产、FA、设备及项目管理团队提供测量方法、数据分析和设备能力方面的专业支持。

Act as the metrology technical owner in customer reviews covering measurement strategy, GRR/MSA, equipment qualification and quality audits. Explain measurement principles, validation logic, acceptance criteria and risk controls, and provide internal support on measurement methods, data analysis and equipment capability.

Attend Apple customer process audit and yield review meetings as process owner. Deliver process improvement logic and control strategy to customer. Provide professional process technical support for FA and EPM teams.

8. 测量系统变更管控 & 量产稳定性保障 | Measurement Change Control & Production Stability

统筹测量设备搬迁、维修、软件或算法升级、程序与参数调整、治具更换及环境变化后的风险评估、再验证与量产释放。建立测量系统变更闭环，确保任何变更不会破坏测量准确度、重复性、再现性及数据可比性，持续保障产线稳定判定。

Own risk assessment, re-validation and production release after measurement equipment relocation or repair, software or algorithm updates, program and parameter changes, fixture replacement and environmental changes. Ensure changes do not compromise accuracy, repeatability, reproducibility or data comparability.

Own full process change control, including evaluation, pilot verification, mass implementation and risk containment. Stabilize mass production performance via standardized change management.

1. 专业背景与行业经验 | Education & Experience

• 本科及以上学历，光学工程、机械、自动化、材料、精密工程等理工科相关专业 Bachelor degree or above in Optical Engineering, Mechanical, Automation, Material or related STEM majors

• 2年及以上精密制造、质量计量或光学测量工程经验 2+ years of experience in precision manufacturing, quality metrology or optical measurement engineering

• 有智能眼镜、AR/VR、视光学、苹果供应链或自动化测量设备经验优先 Experience in AR/VR smart glasses, optometry, Apple supply chain or automated measurement equipment is a strong plus

• 六西格玛黑带超级优先 6σ black belt is a strong plus!

2. 核心测量设备实操能力（硬性技能）| Core Metrology Equipment Competency

熟悉产线精密测量设备及测量软件，能够独立完成设备点检、校准确认、测量程序建立、样品与治具设置、标准件或Golden Sample管理、数据导出与异常排查。能够根据图纸、公差及产品特性选择正确的测量原理、设备精度、量程和测量方法，并确保不同操作员、设备及站点之间的结果一致性。

Hands-on experience with production metrology equipment and measurement software. Capable of equipment checks, calibration verification, measurement program creation, sample and fixture setup, reference or golden sample management, data export and troubleshooting. Able to select suitable measurement principles, accuracy, range and methods based on drawings, tolerances and product characteristics, and maintain consistency across operators, equipment and sites.

3. 逻辑分析 & 计量方法论 & 数据能力 | Analysis, MSA & Data Capability

拥有极强的结构化问题分析与数据驱动能力，熟练应用MSA、Gauge R&R、偏倚、线性、稳定性、SPC、FMEA、8D、5Why及鱼骨图；精通Minitab/JMP，可独立完成测量系统研究、方差来源拆解、NDC与控制图分析、过程能力和DOE验证。六西格玛黑带或计量相关资质优先。

Strong structured and data-driven problem-solving capability. Solid knowledge of MSA, Gauge R&R, bias, linearity, stability, SPC, FMEA, 8D, 5-Why and Fishbone analysis. Skilled in Minitab/JMP for measurement system studies, variation decomposition, NDC and control chart analysis, process capability and DOE validation. Six Sigma Black Belt or relevant metrology qualification is a plus.

Strong logical thinking and data-driven problem-solving skills. Solid experience with 8D, APQP/PPAP/FMEA/SPC/MSA, 5-Why and Fishbone analysis. Skilled in Minitab/JMP for process capability analysis and statistical verification. Six Sigma Black Belt is a significant plus.

4. 跨部门协作能力 | Cross-functional Team Player

高度适配多部门协同工作模式，既能独立解决复杂测量问题，也能高效联动研发、质量、生产、设备、FA、供应商及项目团队推进设备验证、GRR改善和量产释放。

Excellent cross-functional collaboration skills. Capable of independently solving complex measurement issues and coordinating with R&D, Quality, Production, Equipment, FA, suppliers and project teams for equipment qualification, GRR improvement and production release.

5. 项目管理 & 成本意识 | Project Management & Cost-conscious Mindset

具备成熟的计量项目管理能力，擅长验证计划、风险预判、资源统筹与进度管控。拥有强烈的质量、效率与成本意识，测量方案兼顾准确度、检测节拍、设备投资、维护成本及量产可操作性。

Proven planning, risk prediction and resource coordination capability for metrology projects. Strong awareness of quality, efficiency and cost, balancing measurement accuracy, inspection cycle time, equipment investment, maintenance cost and production usability.

6. 自驱迭代 & 持续改善思维 | Curiosity & Continuous Improvement

具备主动改善思维与学习能力，持续钻研新测量技术、新设备、新算法及统计方法，主动识别测量不确定度、设备能力和检测流程中的改善空间，持续推动计量能力升级。

Self-motivated with a strong passion for continuous metrology improvement. Proactively explore new measurement technologies, equipment, algorithms and statistical methods, and continuously improve measurement uncertainty, equipment capability and inspection workflows.

7. 英文技术能力 | Technical English Proficiency

具备流利的技术英语读写与口语沟通能力，可独立完成英文测量SOP、MSA/GRR及设备验证报告撰写，能够进行英文客户汇报、问题答辩并参与全英文审核。

Fluent in technical English (listening, speaking, reading and writing). Capable of preparing measurement SOPs, MSA/GRR and equipment validation reports in English, presenting to customers and supporting technical reviews and audits.

8. 高压抗压能力 & 客户适配 | Stress Resistance & Apple Customer Facing

能够适应严格的客户质量标准、高频数据复盘、量产高压节奏及紧急现场支持。面对GRR失败、设备漂移、校准异常、测量争议及量产判定风险时保持沉稳并快速推进问题闭环。

Able to work under pressure with strict customer quality standards, frequent data reviews and urgent on-site support. Calm and reliable when handling failed GRR studies, equipment drift, calibration issues, measurement disputes and production disposition risks.

9. 出差适配性 | Travel Availability

Willing to support occasional supplier audits, on-site measurement equipment qualification, GRR/MSA execution and cross-site metrology projects.

Your ZEISS Recruiting Team