Full-timeConcord, Vaughan, ON, Canada$35 /hrIn-person
About the Job
Requirements
At least 2 years of security, low-voltage, electrical, or structured cabling experience.
Experience installing commercial security systems and structured cabling installations.
Ability to read drawings and floor plans.
Competency in ATC certification, EMT installation, alarm rough-in, cable support systems, Cat6A structured cabling, fiber installation, Axis camera installation, alarm panel termination, ULC fire alarm inspections, surveillance maintenance, and access control maintenance.
Must hold Working at Heights and WHMIS certifications and a valid Ontario driver's license; must be able to obtain site security clearances when required.
Follow health and safety policies, maintain personal protective equipment, follow Working at Heights procedures, conduct job hazard assessments, complete vehicle inspections, maintain company vehicles, tools, and equipment, and keep worksites clean and organized.
Required certifications include Working at Heights, WHMIS, aerial lift (scissor lift), and aerial lift (boom lift).
Responsibilities
Install, maintain, test, and service security, surveillance, structured cabling, and access control systems according to company standards and procedures.
Install and maintain Belden Cat6, Cat6A, Cat6A shielded, and Phantom shielded cabling; telecommunications room cabling; network cabling infrastructure; and device cabling and patching.
Perform cable terminations, testing and certification, labeling and documentation, and quality inspections.
Install J-hooks, basket tray, ladder tray, cable support systems, firestop systems, and bonding and grounding components; apply proper cable dressing, cable management, and company installation standards.
Install fiber optic and armored fiber cable, terminate fiber cable, perform basic fiber testing, and assist with troubleshooting fiber systems.
Install and service Axis fixed, PTZ, and multi-sensor cameras and Axis intercom systems; mount and position devices, configure cameras, conduct acceptance testing, and perform surveillance maintenance inspections.
Mount alarm panel enclosures; install backup batteries, power supplies, and communication modules; terminate zones and keypads; label field wiring; assist with system testing; and commission alarm panels.
Mount access control panels; install power supplies, readers, door contacts, request-to-exit devices, and locking hardware; test doors; commission systems; and perform access control maintenance.
Install and support EMT, FMC, LFMC, and RMC; measure and bend EMT; install supports and connectors; and pull wire.
Complete service reports, cable certification reports, as-built drawings, device labeling, panel schedules, and customer onboarding documentation.
Desired Qualifications
ATC certification, Axis training, lift certification, First Aid/CPR, and manufacturer certifications.
About New Age Group For more than 25 years, The New Age Group has delivered security and technology solutions for residential, commercial, industrial, institutional, and multi-residential clients. Our expertise includes access control, video surveillance, intrusion alarms, ULC inspections, structured cabling, fiber optics, intercom systems, networking, and integrated technology platforms. We are committed to delivering high-quality workmanship, innovative solutions, and exceptional customer experiences. Our technicians work with leading manufacturers and technologies while benefiting from ongoing training, certification programs, and clearly defined career progression opportunities.
Position Summary The Level I Technician is responsible for the installation, maintenance, testing, and servicing of security, surveillance, structured cabling, and access control systems under established New Age standards and procedures.
This role requires a technician capable of working independently on standard installations while maintaining company quality standards, safety requirements, and customer expectations. The successful candidate will have strong installation skills, excellent attention to detail, and a commitment to workmanship excellence.
Primary Responsibilities Structured Cabling Install and maintain:
Belden Cat6 Cabling
Belden Cat6A Cabling
Belden Cat6A Shielded Cabling
Belden Phantom Shielded Cabling
Telecommunications room cabling
Network cabling infrastructure
Device cabling and patching
Perform:
Cable terminations
Cable testing and certification
Labeling and documentation
Quality inspections
Structured Cabling Infrastructure Install:
J-Hooks
Basket Tray
Ladder Tray
Cable Support Systems
Firestop Systems
Bonding and Grounding Components
Demonstrate:
Proper cable dressing techniques
Professional cable management
Compliance with New Age installation standards
Fiber Optics
Install fiber optic cable
Install armored fiber cable
Terminate fiber optic cable
Perform basic fiber testing
Assist with troubleshooting fiber systems
Surveillance Systems Install and service:
Axis Fixed Cameras
Axis PTZ Cameras
Axis Multi-Sensor Cameras
Axis Intercom Systems
Perform:
Device mounting
Camera positioning
Camera configuration
Acceptance testing
Surveillance maintenance inspections
Intrusion Systems
Mount alarm panel enclosures
Install backup batteries
Install power supplies
Terminate zones
Terminate keypads
Install communication modules
Label field wiring
Assist in system testing
Perform alarm panel commissioning
Access Control Systems
Mount control panels
Install power supplies
Terminate readers
Terminate door contacts
Install REX devices
Install locking hardware
Perform door testing
Complete system commissioning
Perform access control maintenance work
Conduit & Pathways Install and support:
EMT
FMC
LFMC
RMC
Perform:
Measuring and bending EMT
Installation of supports
Wire pulling
Connector installation
Documentation Complete:
Service reports
Cable certification reports
As-built drawings
Device labeling
Panel schedules
Customer onboarding documentation
Required Qualifications Experience
2+ years of security, low-voltage, electrical, or structured cabling experience
Experience installing commercial security systems
Experience with structured cabling installations
Ability to read drawings and floor plans
Technical Requirements Level I Technicians are expected to have competency in:
ATC Certification
EMT Installation
Alarm Rough-In
Cable Support Systems
Cat6A Structured Cabling
Fiber Installation
Axis Camera Installation
Alarm Panel Termination
ULC Fire Alarm Inspections
Surveillance Maintenance
Access Control Maintenance
Required Certifications
Working at Heights
WHMIS
Valid Ontario Driver's License
Ability to obtain site security clearances when required
Preferred Certifications
ATC Certification
Axis Training
Lift Certification
First Aid / CPR
Manufacturer Certifications
Safety Responsibilities All technicians must:
Follow New Age Health & Safety policies
Maintain PPE requirements
Follow Working at Heights procedures
Conduct Job Hazard Assessments
Complete vehicle inspections
Maintain company vehicles
Maintain tools and equipment
Keep worksites clean and organized
Required certifications include:
Working at Heights
WHMIS
Aerial Lift (Scissor Lift)
Aerial Lift (Boom Lift)
Quality Standards New Age maintains strict installation standards.
Career Growth Opportunities New Age provides a defined advancement path: Apprentice → Labourer → Technician I → Technician II → Senior Technician → Lead Technician Additional manufacturer and ULC certifications are provided through ongoing company training programs.
Compensation & Benefits
Competitive compensation based on experience
Company vehicle
Company mobile phone
Career advancement opportunities
Ongoing professional development
Health and dental benefits (where applicable)
Why Join New Age?
Industry-leading training program
Clear career advancement path
Exposure to enterprise security technologies
Professional and team-oriented environment
Commitment to quality, safety, and accountability
Hourly Rate: $35.00 Reports to: Lead Technician/Operations Manager