Must be enrolled or scheduled to enroll in an electrical apprenticeship program.
Must maintain a valid apprenticeship card and carry it during work hours.
Must be capable of following instructions, communicating effectively, retaining information, and identifying materials used in the trade.
Must complete required safety training and OSHA 10.
Year 2 through Year 4 apprentices must hold a valid Apprentice Electrician license with the State of Utah, be enrolled in the Electrical Apprenticeship Program, and have the specified completed school year, documented field hours, and applicable electrical knowledge and experience for their level.
Must be able to interpret and follow the National Electrical Code and comply with state and local building codes.
Must have the tools listed on the Apprentice Tool List.
Must possess a valid driver's license with a clean driving record.
Must pass a pre-employment drug screening and background check.
Must be able to perform the stated physical duties, including bending, stooping, squatting, crawling, climbing, kneeling, balancing, pushing, pulling, reaching overhead, lifting more than 50 pounds, standing for 90% of the day, working at height, working in trenches, and handling heavy electrical equipment and materials.
Responsibilities
Dig trenches and holes for conduit, supports, hand holes, manholes, and foundations.
Install copper-clad ground rods using a manual post driver.
Break up concrete with an air hammer to facilitate equipment installation, construction, or repair.
Transport tools, materials, equipment, and supplies to work sites by hand truck or motorized truck.
Raise, lower, or position equipment, tools, and materials using hoists, hand lines, or block and tackle.
Inform the journeyman of material needs.
Maintain tools and equipment and keep parts and supplies organized.
Perform semi-skilled and unskilled labor related to installing, maintaining, and repairing electrical systems and equipment.
Thread conduit ends, connect couplings, and fabricate and secure conduit support brackets using hand tools.
Drill holes and pull or push wiring through openings using hand and power tools.
Clean work areas and tools.
Plan, diagram, install, and repair electrical fixtures, apparatus, and control equipment, including switches, relays, and circuit breaker panels.
Measure, cut, bend, thread, assemble, and install electrical conduit and pull wire through conduit.
Test circuits with an ohmmeter and other testing equipment to ensure component compatibility and safety.
Desired Qualifications
Completion of 16 electrical continuing education credits is recommended.
** Currently seeking 3rd & 4th year apprentices**
About us: Rocky Mountain Electric (RME) is a second-generation, family-owned electrical contracting firm based in Boise, Idaho, with a branch in Salt Lake City, Utah. Since 1978 RME has set the standard for electrical construction, electrical service and maintenance. Our customer-centric approach is second to none as is our expertise and enthusiasm for what we do. Consistently working in Idaho, Utah and Oregon, RME is an established leader in all phases of construction, maintenance and service. RME is a family company with family values. Our team is made up of a unique dynamic of knowledge, focus, experience, and skills. We offer decades of experience mixed with youth and enthusiasm, and a tireless work ethic. If you’re interested in working with a group of talented individuals in the electrical contracting field, we would love you to join our team!
Employee Benefits Include (some benefits are subject to employee contribution):
100% Company Paid Health Insurance for Employee and Family (HSA option available)
100% Company Paid Dental Insurance
100% Company Paid Vision Insurance
100% Company Paid Group Short-Term Disability
100% Company Paid Group Life Insurance
Voluntary Supplemental Insurance Options (Short-Term Disability, Long-Term Disability, Accident, Critical Illness, Hospital Indemnity and Life Insurance)
401(k) Retirement with up to a 5% company match
Paid Vacation
Paid Holidays
Competitive Wages
Future Advancement Opportunities
Positive Team and Skill Enhancing Atmosphere
Professional Development Training
A family. This is on the list because it’s most important. We care about our team and expect you to bring that same care when you join our team. We do more than just work together. You’ll come to love our company outings and you’ll build life-long friendships.
Summary: An Electrical Apprentice possesses basic knowledge of new construction and demo electrical power installation including but not limited to alterations additions and /or repairs of electrical systems, conductors and associated materials and equipment with in the electrical industry. Apprentice Electricians are responsible for planning, diagram, install, and repair electrical fixtures, apparatus, and control equipment such as switches, relays, and circuit breaker panels in addition to measure, cut, bend, thread, assemble, and install electrical conduit (pipe or tubing), and pull wire through conduit. Consistently test circuits to ensure compatibility and safety of components, using instruments; such as the ohmmeter and other testing equipment.
Responsibilities:
Dig trenches or hole for installation of conduit or supports, hand holes, man holes and foundations
Install copper-clad ground rods, using a manual post driver
Break up concrete, using air hammer, to facilitate installation, construction or repair of equipment
Transport tools, materials, equipment and supplies to work site by hand truck, or heavy motorized truck
Raise, lower or position equipment tools and materials using hoist hand line or block and tackle
Inform Journeyman of material needs
Maintain tools and equipment and keep parts and supplies in order
Perform semi-skilled and unskilled laboring duties related to the installation maintenance and repair of a wide variety of electrical systems and equipment
Thread conduit ends, connect couplings and fabricate and secure conduit support brackets using hand tools
Drill holes and pull or push wiring through openings, using hand and power tools
Clean work area and tools
Year 1 Apprentice:
Must be able to interpret and follow the National Electric Code and comply with state and local building codes
Must have all tools located on Apprentice Tool List
Must be enrolled or scheduled to enroll in electrical apprenticeship program
Must maintain valid apprenticeship card and have it on your person at all times during work hours
Must be capable of following instructions, have good communication skills, and the ability to retain information
Must be capable of identifying materials used in the trade
Completion of required safety trainings
Recommended completion of (16) electrical continuing education credits
Must complete OSHA 10
Year 2 Apprentice:
Valid Apprentice Electrician license with the State of Utah
Enrolled in Electrical Apprenticeship Program - 1st year of school completed with a ‘C’ or better average
2000+ hours electrical experience in the field documented
Expanded knowledge of electrical systems, codes, and regulations
Proficiency in interpreting electrical diagrams and blueprints
Experience in basic electrical installations and repairs
Ability to work independently under limited supervision
Familiarity with electrical testing equipment and procedures
Year 3 Apprentice:
Valid Apprentice Electrician license with the State of Utah
Enrolled in Electrical Apprenticeship Program – 2nd year of school completed with a ‘C’ or better average
4000+ hours electrical experience in the field documented
Advanced knowledge of electrical systems, components, and their functions
Experience in complex electrical installations, repairs, and troubleshooting
Ability to lead small projects and mentor less experienced apprentices
Strong understanding of electrical codes and safety regulations.
Proficient use of electrical tools, equipment, and testing instruments
Year 4 Apprentice:
Valid Apprentice Electrician license with the State of Utah
Enrolled in Electrical Apprenticeship Program – 3rd year of school completed with a ‘C’ or better average
6000+ hours electrical experience in the field documented
Comprehensive knowledge of electrical systems, components, and their applications
Expertise in electrical installations, maintenance, and repairs
Ability to work independently on complex electrical projects
Proficient troubleshooting skills and the ability to identify and resolve issues efficiently
Excellent understanding of electrical codes, regulations, and safety protocols
Physical Demands & Qualifications:
Must be able to bend, stoop, squat, crawl, climb, kneel, balance, push, pull, and reach overhead
Ability to hear and respond to conversations, phone calls and other sounds
Ability to lift 50lbs+
Stand 90% of the day
Climb ladders
Possess good vision (normal or corrected)
Carry material from one location to another or floor to floor
Lifting and work with tools above head
Lifting, positioning and fastening of heavy electrical equipment
Lifting, positioning and fasting objects such as light fixtures, wire, conduit, junction boxes, motors and other equipment
Must be able to work from A-Frames, extension ladders, boom lift, scaffolds and aerial work platforms at various heights
Identify and separate wires by color
Dig and work in trenches
Valid driver's license with a clean driving record
Ability to pass pre-employment drug screening and background check
ROCKY MOUNTAIN ELECTRIC CORE VALUES:
*Willingness to Learn & Grow* *Loyalty* *Leadership* *Expectation of Excellence* *Professionalism*
If you want to be part of something bigger than just a job – make this career move and find exactly what you’re looking for. You will work in a place where you will be appreciated by your team and customers, and where your work has a direct effect on the success of the company.