Omni Design Technologies

Licenses high-performance IP cores for SoCs

Analog Design Lead/Manager

Silicon & ASIC DesignConfirmed live in the last 24 hours

Full-timeHyderabad, Telangana, IndiaNo salary listed

About the Job

Requirements

A Bachelor of Science in Electrical Engineering is required.
A minimum of 10 years of experience in the analog semiconductor industry is required.
Experience with design at 22, 16, 12, and lower technology nodes is required.
Familiarity with power amplifiers, modulators, low-noise amplifiers, local oscillators, detectors, dividers, and biasing is required.
Experience with frequency-domain and time-domain analysis and design techniques is required.
Experience leading project teams and taping out complete products or test chips is required.

Responsibilities

Manage, hire, supervise, and retain the analog team for chip development.
Work with the IP engineering team to obtain and customize IP for product integration.
Evaluate and select third-party IP such as PCIe, USB, JESD204C, MIPI, and Ethernet PHY, and integrate it into chips.
Enable analog engineers to develop the skills needed for their work.
Analyze functional and performance requirements and derive specifications.
Architect circuit solutions.
Perform schematic capture, simulation, and key-element layout for cells, blocks, macros, and complete devices.
Interface with IC designers, package designers, characterization engineers, and operations to complete working designs, ensure testability, and validate finished silicon.
Work with the architect to establish system-level specifications.
Customize internal and external analog IP licensed for chip development.
Evaluate IP for licensing, including PCIe, LPDDR4, and JESD204C PHY.
Help develop built-in self-test systems.
Perform full-chip integration.
Help set up the analog/mixed-signal full-chip simulation environment.
Run simulations.
Help debug full-chip simulations.
Help resolve timing issues and work with the physical-design engineer to resolve signal-integrity issues.

Desired Qualifications

A Master of Science in Electrical Engineering is preferred.
Experience leading a chip is preferred.
EHF or millimeter-wave design experience is a plus.
Experience with one or two of high-speed or high-precision analog-to-digital converter design, digital phase-locked loops, SerDes, voltage-controlled oscillators, or power-management units.

Omni Design is working on exciting solutions and chips for next generation automotive and space applications and looking for talented and capable engineers.

As part of the IC design team, manage the analog team and participate in and eventually lead the development of new circuits, complete front-end, test chips, and full products for ODT.

Role and Responsibilities

Roles and Responsibilities:
Manage, hire, supervise and retain the analog team – for Chip Development
Work with the IP engineering team to take the IP needed and make any customization needed for integration into the products being developed
Evaluate and select the IP from third party vendors like PCIe, USB, JESD204C, MIPI, Ethernet PHY and integrate the IP into our chips
Enable the analog engineers to develop necessary skills for the job
Analyze functional and performance requirements and derive specifications
Architect circuit solutions
Perform schematic capture, simulation and key-element layout of cells, blocks, macros and entire devices
Interface with other IC designers, package designers, characterization engineers, and operations to complete working designs, ensure testability, and validate finished silicon
Work with Architect to set system level specifications

Qualifications and experience

BSEE Required, MSEE Preferred
Minimum 10 years in analog semiconductor industry
Experience in leading a chip preferred
EHF/mmWave design experience is a plus
Design Experience with 22, 16, 12 and lower nodes
Familiar with PAs, Modulators, LNAs, LOs, detectors, dividers, biasing
Experience with one or two of high speed, high precision ADC design, Digital PLL, SerDes, VCO, PMU
Experience with both frequency- and time-domain analysis and design techniques required
Experience leading project teams and taping out complete products or test chips required

Expectations

Make any (if needed customizations) to the internal and external Analog IP licensed for the chips we are going to develop.
Evaluate the IP we have to license – like PCIe, LPDDR4, JESD 204C PHY
Help develop any BIST
DO the Full chip integration
Help setup the AMS mixed signal full chip simulation environment
Run a few of the simulations
Help with the FC simulations debug
Help close the timing issues if any come up and work with the PD person to resolve any SI issues.

About the Company

Omni Design Technologies

Licenses high-performance IP cores for SoCs

Omni Design Technologies delivers high-performance, ultra-low power IP cores for mixed-signal SoCs that power devices across 5G, LiDAR, automotive networks, AI, image sensing, and IoT. It develops and validates IP blocks and licenses them to chip makers, offering customization and support to ensure seamless integration into customer designs. The cores are designed to work on FinFET processes down to 28nm, with proven silicon such as gigasample low-power ADCs and DACs on TSMC 28nm. The company differentiates itself through validated, silicon-proven IP, deep collaboration with customers and partners (e.g., LeddarTech, MegaChips), and a global design footprint (new Fort Collins design center). Its goal is to enable customers to build sophisticated, power-efficient, mixed-signal SoCs quickly by providing ready-to-license IP plus engineering services that fit their specific needs.

Company size: 51-200
Company stage: Series A
Total funding: $35M
Headquarters: Milpitas, CA
Founded: 2015

Recently Posted Jobs

Explore more opportunities at Omni Design Technologies

See more jobs