R

Rivian and Volkswagen Group Technologies

Builds software and electronics for electric cars

EMC Test Technician

Hardware Validation & TestingConfirmed live in the last 24 hours
Full-timeIrvine, CA, USAHybrid

About the Job

Requirements

  • Bring 3–7 years of direct, bench-level EMC testing experience in the automotive sector, or equivalent experience from aerospace, defense, or consumer electronics with substantive knowledge of automotive EMC test methodologies and a credible path to OEM standard fluency.
  • Demonstrate practical fluency in ISO 11452, ISO 7637, and OEM-specific test specifications governing major vehicle manufacturers.

Responsibilities

  • Set up, configure, and operate EMC test equipment for full suites of component- and module-level immunity and emissions testing under applicable automotive standards.
  • Execute radiated and conducted emissions testing under CISPR 25 and OEM emission specifications.
  • Execute radiated immunity, bulk current injection, direct power injection, and conducted immunity testing under the ISO 11452 series.
  • Perform transient pulse immunity testing under ISO 7637-2, ISO 16750-2, and OEM equivalent pulse libraries, including Pulses 1, 2a, 2b, 3a, 3b, 4, 5a, and 5b.
  • Execute ESD testing under ISO 10605 and IEC 61000-4-2 as required by OEM test specifications.
  • Configure, operate, and maintain line impedance stabilization networks, current probes, injection clamps, coupling/decoupling networks, and antenna systems.
  • Execute and interpret Volkswagen TL 81000 test requirements, including applicable waveforms, frequency sweeps, monitoring parameters, and pass/fail criteria.
  • Maintain working knowledge of current OEM specification revision levels and flag impacted test plans when specifications are updated.
  • Operate and configure EMI test receivers and spectrum analyzers.
  • Configure signal generators and radio-frequency power amplifiers for immunity test signal chains.
  • Set up and validate antenna factors for biconical, log-periodic, horn, and monopole antenna systems.
  • Operate and maintain ISO 7637-2 transient pulse generators and OEM transient test profiles.
  • Operate ESD simulators using applicable network configurations.
  • Execute and document system validation checks, including antenna calibration, chamber correlation, ALSE validation, and BCI calibration, to confirm measurement system integrity.
  • Operate EMC test automation platforms, including TILE!, Python- and LabVIEW-based custom test sequences, or equivalent platforms.
  • Configure test sequences, frequency plans, and dwell parameters in automation software according to test plan requirements.
  • Verify automated test setup outputs against manual baselines to confirm data validity.
  • Troubleshoot automation anomalies, flag software/hardware interface issues, and implement corrective actions.
  • Generate accurate, complete, and professional EMC test reports suitable for direct OEM customer submission without engineering rework.
  • Document test configurations, setup photographs, equipment calibration records, ambient verification data, and pass/fail determinations with appropriate technical rigor.
  • Maintain detailed test logs, non-conformance records, and device-under-test condition notes throughout test campaigns.
  • Support internal engineering teams with root-cause data, frequency-domain plot interpretation, and retest documentation following device-under-test modifications.
  • Perform routine calibration checks, preventive maintenance, and equipment health verification on laboratory assets.
  • Maintain calibration due-date tracking and coordinate with external calibration providers in support of ISO/IEC 17025 accreditation requirements.
  • Maintain clean, organized, and operationally ready laboratory environments, including cable management, antenna storage, ground-plane maintenance, and chamber cleanliness.
  • Identify equipment failures, degraded performance indicators, and measurement anomalies; initiate corrective actions and document findings.

Desired Qualifications

  • Hold an iNARTE EMC Technician or Engineer certification, or be actively progressing toward certification.
  • Have experience supporting A2LA or NVLAP laboratory accreditation under ISO/IEC 17025, including participation in audits, corrective actions, and method validation activities.
  • Have experience with electric- or hybrid-electric-vehicle high-voltage component EMC testing, including CISPR 12, UN ECE Regulation 10, and SAE J551 series.
  • Have experience with antenna measurement or over-the-air testing for vehicle-integrated antenna systems.
  • Have familiarity with EMC pre-compliance and diagnostic techniques, including near-field probing, time-domain troubleshooting, and common-mode current measurements.
  • Have practical radio-frequency shielding and filtering knowledge sufficient to support product-debug conversations with design engineering.

About the Company

Rivian and Volkswagen Group Technologies

Builds software and electronics for electric cars

Rivian and Volkswagen Group Technologies develops vehicle software and electronic systems for Rivian and Volkswagen Group's electric cars. Its platform links the computers that control vehicle functions with operating systems, cloud services and wireless updates. Automakers use the shared architecture to add features across different models and improve vehicles after sale without a service visit. The independent venture develops technology for its two automotive owners under a partnership built around shared engineering work and licenses to Rivian's existing software and hardware. Founded in 2024, the company is headquartered in Palo Alto, California, United States.

Company size
1,001-5,000
Company stage
Not listed
Total funding
Not listed
Headquarters
Palo Alto, CA
Founded
2024

Recently Posted Jobs

Explore more opportunities at Rivian and Volkswagen Group Technologies

See more jobs