Ability to learn and perform equipment repair tasks.
Ability to use calipers, a tape measure, rulers, and similar tools to measure and check finished work.
Ability to enter and retrieve data using Microsoft Office (Word and Excel) and software including DCS, AspenTech, and LabelStation.
Ability to work weekends and holidays as needed.
Proficiency in basic arithmetic, including addition, subtraction, multiplication, division, percentages, and averages.
Ability to work with two other operators in a 10-by-10-foot area while twisting and maneuvering around carts and tables.
Ability to stand for most of an eight-hour shift and work at an inspection table approximately four feet high.
Ability to push, pull, and maneuver carts weighing approximately 230 pounds through crowded spaces.
Ability to bend and lift up to 50 pounds from below the waist to approximately four feet high while twisting.
Ability to lift and twist while holding 11-pound bags during the shift, up to approximately 180 bags.
Ability to retrieve product from floor level and reach elevated surfaces during cleaning.
Ability to manually handle approximately 2,000 pounds per day as an inspection operator and 14,000 pounds per day as a label station operator.
Ability to inspect, weigh, and seal approximately 25-pound cylindrical polysilicon rods while standing.
Ability to inspect, weigh, and seal seed products weighing approximately 10 pounds in bundles of 16.
Responsibilities
Work in a high-production-rate environment processing polysilicon final product while maintaining company safety and quality standards.
Work inside a clean room, donning and doffing dedicated clean-room garments six times per day and wearing personal protective equipment for cut and puncture protection.
Size, sort, visually inspect, and weigh small, sharp, rock-like pieces weighing up to 11 pounds for defects against different customer specifications.
Maintain product and operating-supply inventories.
Operate static and in-motion weighing scales and bag sealers.
Organize and maintain inspection paperwork.
Ensure product tracking and traceability of basket lot-data groups through the inspection process.
Keep the work area clean throughout the day and before leaving the shift.
Maintain electronic records of seed and bridge production, including lot numbers, quantities, and seed lengths, using Microsoft Excel and LabelStation.
Change plastic sheeting and gloves frequently to protect the product.
Inspect baskets and carts for defects.
Move emptied carts and baskets to upstream areas.
Operate the label station.
Perform seed and cut-rod inspections.
Perform clean-room maintenance and cleaning.
Evaluate material-flow logistics through process areas to ensure operational efficiency.
Move 50-pound baskets of polysilicon between carts to sort and stage product.
Work around moving parts.
Desired Qualifications
Further education and certifications such as Chemical Operator, AIDT, ISO 9001, and/or ISO 14001 are preferred.
Description
Job Title: Inner Packaging Inspector
Department: Finishing
Reports to: Manager, Finishing
Job Summary:
The Finishing Operator works in a high production rate environment processing polysilicon final product while exhibiting a high level of commitment to maintaining company safety and quality standards.
Essential Duties/Responsibilities:
· Work inside of clean room environment requiring don and doff of dedicated clean room garments 6 times per day as well as PPE for cut / puncture protection
· Size, sort, visually inspect, & weigh to 11-lbs small, sharp, rock-like pieces for defects within different customer specifications
· Maintain product and operating supply inventories
· Operation of static & in-motion weigh scales and bag sealers
· Organize and maintain inspection paperwork
· Ensure product tracking and traceability of all lot data groups of baskets through the inspection process
· Keep work area clean throughout the day and before leaving shift
· Maintain electronic records of seed/bridge production, including lot numbers, quantities and seed lengths using MS excel and Label Station.
· Frequent changes of plastic sheeting and gloves for product protection
Additional Duties/Responsibilities:
· Inspect baskets and carts for defects
· Move emptied carts and baskets to upstream areas
· Operate label station
· Perform seed and cut rod inspections
· Perform clean room maintenance and cleaning
· Evaluate the logistics of material flow through process areas to ensure operational efficiency
· Move 50-lb baskets of P-Si between carts for sorting and staging product
· Work around moving parts
· Additional duties as assigned
Requirements
Required Skills/Abilities:
· Ability to learn and perform repair tasks on equipment
· Exceptional attention to detail
· Understanding of how to use calipers, a tape measure, rulers, etc. for measuring and checking finished work
· Data entry and retrieval from MS office (Word and Excel) and the use of computer software including DCS, AspenTech, LabelStation
· Ability to work weekends and holidays as needed
· Proficiency in basic math such as addition, subtraction, multiplication, division, percentage, and average calculations
· Ability to work with 2 other operators in a 10 x 10-ft area while twisting & maneuvering around carts and tables
Education and Experience:
High School Diploma or equivalent; further education and certifications such as Chemical Operator, AIDT, ISO 9001 and/or 14001 are preferred
Physical Requirements:
· Ability to stand for the majority of an 8-hour shift
· Ability to stand at approximately 4-ft height inspection table
· Push / pull and maneuver approximately 230-lb carts through crowded spaces
· Bend to Lift up to 50 lbs. from below the waist to approximate 4-ft height while twisting
· Lift and twist while holding 11-lb bags during course of shift (up to approximately 180 bags)
· Ability to retrieve product from floor level and reach elevated surfaces during cleaning
· Expect to manually handle approximately 2000-lbs per day as inspection operator and 14,000 lbs per day as a label station operator
· Inspect, weigh, and seal approximately 25-lb cylindrical P-Si rods while standing
· Inspect, weight, and seal seed products weighing approximately 10-lbs in bundles of 16