EQT Corporation

Produces natural gas via integrated operations

Facilities 1&E Engineer 1/2/3/Senior

Controls & Automation EngineeringConfirmed live in the last 24 hours

Full-timeCanonsburg, PA, USANo salary listed

About the Job

Requirements

At least 2 years of engineering experience focused on automation and controls.
A bachelor's degree in Mechanical, Petroleum, Chemical, Electrical, or Computer Engineering.
A valid driver's license.
A general understanding of process flow and equipment used for separation of fluids on common oil and gas production wells.
Understanding of ASME, ANSI, API, ISA, NFPA, IEEE, IEC 61131, and NEC specifications and standards.
Experience in hazard mitigation and root cause analysis.
Understanding of engineering drawing packages, including cause-and-effect and bill-of-material development, controller programming, control panel drawings, junction box drawings, instrument cable schedules, interconnect drawings, heat-trace panel drawings, designs and isometrics, grounding, and electrical power drawings.
A general understanding of edge-device computing and associated communications and programming.
Economic acumen, including prior cost and project management experience.
Communication and presentation skills.
Technical writing capabilities, including design specifications and standard operating procedure generation.
Ability to communicate complex workflows and ideas concisely to achieve results.
Ability to work independently as needed.
Ability to travel 15–20% of the time.
Ability to work flexible hours, including weekends and holidays as needed.

Responsibilities

Provide technical expertise in all phases of measurement and instrumentation design.
Own automation, instrumentation, and electrical engineering design, planning, execution, cost management, and project closeout for upstream facilities.
Develop and evolve standards, specifications, and guiding documentation used by the engineering team for automation and instrumentation and electrical work.
Manage projects and jobs associated with measurement and instrumentation and instrumentation and electrical work for upstream facilities.
Contribute to development of yearly budgets for measurement and instrumentation and instrumentation and electrical projects.
Develop and manage yearly key performance indicators and metrics aligned with executive targets and goals.
Identify and maintain accountability for instrumentation and electrical equipment, including long-lead items for new designs, installations, repairs, and upgrades.
Work with drafting teams and third-party engineering firms on cause-and-effect and bill-of-material development, controller programming, control panel and junction box drawings as needed, instrument cable schedules, interconnect drawings, heat-trace panel drawings, designs and isometrics, grounding, and electrical power drawings.
Review and approve instrument indexes for newly designed facilities and repair or upgrade work.
Lead internal and external meetings to review designs and models for measurement and instrumentation and electrical projects associated with upstream facilities.
Align standards and operations with measurement and instrumentation engineers inside and outside the department.
Optimize on-location controls and automation in collaboration with Production Operations counterparts.
Own network architecture drawings for upstream facilities.
Develop and maintain control applications to optimize usability and meet control requirements.
Maintain application revision control and document revision history for upstream facilities.
Own standard base HMI and site controller configurations for upstream facilities.
Lead development of an approach to bridge upstream facility data and machine learning, including artificial intelligence.

Desired Qualifications

Prior oil and gas industry experience, with familiarity with water operations.
Educational exposure to topics similar to data science.
Experience in equipment design or manufacturing, or oil-field facility construction.
Advanced Microsoft Office Suite experience, including Visio.
Familiarity with PLC programming.
Familiarity with Allen-Bradley PLCs and HMIs.
Familiarity with Emerson control devices, including Remote Operations Controllers and FB3000s.
Familiarity with Rosemount transmitters and flowmeters.
Familiarity with pump automation and control loops.
Familiarity with Aspen, AutoCAD, Bluebeam, computerized maintenance management systems, ProMax, Salesforce, SCADA systems, Smartsheet, and Synergi.

At EQT, you won't just do a job, you'll help shape our future. Through Transparent Leadership, you'll work alongside leaders who value collaboration and ensure every voice is heard. Through Connected Impact, you'll see how your work influences critical business decisions and drives value across our operations. Through Supported Growth, you'll have opportunities to expand your skills through cross-functional collaboration, development opportunities, and career advancement.

Join our Qrew!

Here is how the Facilities Instrumentation and Electrical Engineer role will impact our business:

The Facilities Instrumentation and Electrical Engineer I/II/III/Sr. is responsible for providing technical guidance and focus surrounding our instrumentation controls and devices while working hand in hand with EQT Team Members and External Business Partners. This position will provide the opportunity for growth and development through mentorship provided by the experience of a diverse engineering department. The M&I Engineer will be responsible for connecting our networks and evolving how we leverage instrumentation and automation to drive operational success.

The Facilities Instrumentation and Electrical Engineer I/II/III/Sr. responsibilities include but are not limited to:

Provide technical expertise in all phases of measurement and instrumentation design.
“Owner” of the Automation / Instrumentation & Electrical (I&E) engineering design / planning / execution / cost management / project closeout for all upstream facilities.
Responsible for development & evolution of all standards / specifications / guiding documentation leveraged by the engineering team surrounding automation and I&E.
Manage all projects / jobs associated with M&I & I&E work associated with upstream facilities.
Responsible / Consulted for developing a yearly budget for M&I & I&E projects year over year.
Develop and manage key performance indicators and metrics yearly that align with executive targets and goals.
Responsible for I&E & Electrical equipment identification / accountability for all long lead items associated with new design / installations and repair / upgrade projects.
Work with drafting / 3rd party engineering firm on cause and effects (C&E) / bill of material (BOM) development / controller programing / control panel drawings (as needed) / JB drawings (as needed) / instrument cable schedules / interconnect drawings / heat trace panel drawings/design/isos / grounding / electrical power drawings.
Review and approve the instrument index that will be used for newly designed facilities and repair / upgrade work.
Lead internal and external meetings to review designs and models for all M&I / Electrical related projects associated with upstream facilities.
Align standards / operations with all M&I Engineers assigned internal and external to the department.
Optimize all on-location controls/automation working alongside Production Operations counterparts.
Owner of network architecture drawings for all upstream facilities.
Develop and maintain control applications to ensure they are optimized for useability and meet control requirements.
Maintain application revision control and documentation of revision history for upstream facilities.
Responsible for the standard base HMI and site controller configurations for all upstream facilities.
Lead the path forward for the engineering team developing a bridge between upstream facility data and machine learning (i.e. Artificial Intelligence).

Required Experience and Skills:

2+ years of experience in engineering with a focus on automation and controls.
Bachelor’s Degree in Engineering (Mechanical / Petroleum / Chemical / Electrical / Computer).
Valid driver's license required.
General understanding of Process Flow & Equipment Used For Separation of Fluids On Common Oil and Gas Production Wells.
Understanding of ASME, ANSI, API, ISA, NFPA, IEEE, IEC 61131, NEC Specs and Standards.
Hazard Mitigation and Root Cause Analysis Experience.
Understanding of engineering drawing packages to include cause and effects (C&E) / bill of material (BOM) development / controller programing / control panel drawings (as needed) / JB drawings (as needed) / instrument cable schedules / interconnect drawings / heat trace panel drawings/design/isos / grounding / electrical power drawings.
General understanding of Edge Device Computing and associated communication / programming.
Economic Acumen to include prior cost and project management.
Communication and Presentation Skills.
Technical writing capabilities to include Design Specifications and Standard Operating Procedure (SOP) generation.
Extreme Ownership Mentality.
Able to take complex workflows/ideas and communicate them concisely to achieve results.
Self-Starter / Team Player.
Able to Work Independently as needed.
Ability to travel 15-20% of the time.
Ability to work flexible work hours inclusive of weekends and holidays as needed.

Preferred Experience:

Prior experience in the oil and gas industry w/ familiarization of water operations.
Preferred exposure in an educational field to topics similar to data science.
Equipment design/manufacturing or oil field facility construction.
Advanced Microsoft Office Suite Experience to include Vizio.
Familiarity with PLC programming.
Familiarization with:
- Allen Bradley PLCs / HMIs
- Emerson Control Devices (Remote Operations Controllers (ROC) / FB3000s)
- Transmitters and Flowmeters (Rosemount specifically)
- Pump automation / control loops (would be preferred)
- Aspen
- AutoCAD
- Blue Beam
- Computerized Maintenance Management System (CMMS)
- ProMax
- Salesforce
- Scada Systems
- Smartsheet
- Synergi

Work Location:

The job is hybrid, meaning it combines field work, remote work, and office work in the Pittsburgh, PA and the surrounding operational area.

Selected incumbent will be placed into the position that best suits their abilities and experience level.

EQT Corporation and its subsidiaries is an Equal Opportunity Employer -- Disabilities/Veterans.

About the Company

EQT Corporation

Produces natural gas via integrated operations

EQT Corporation is a large-scale natural gas producer that operates in Pennsylvania, West Virginia, and Ohio, focusing its activities in the Appalachian Basin. It runs the full supply chain—from exploration and extraction to processing and delivery—through its own operations to provide gas for energy needs. Its vertically integrated model allows it to manage costs and reliability by controlling multiple steps end-to-end. The goal is to deliver affordable, reliable, and cleaner energy while creating long-term value for employees, landowners, communities, partners, and investors.

Company size: 1,001-5,000
Company stage: IPO
Headquarters: Cecil Township, Pennsylvania
Founded: 1888

Recently Posted Jobs

Explore more opportunities at EQT Corporation

See more jobs