Facilities Technician

Welcome! We’re excited you’re considering an opportunity with us! To apply to this position and be considered, click the Apply button located above this message and complete the application in full.  Below, you’ll find other important information about this position. 

Performs general maintenance, repair and inspection of hospital systems along with equipment to provide a safe and comfortable environment for the patient and staff. Responsible to adhere to all applicable maintenance and repair work practices, quality standards, and policies in accordance with building structure and plant equipment.

MINIMUM QUALIFICATIONS:
EDUCATION, CERTIFICATION, AND/OR LICENSURE:

1. High school diploma or GED equivalent
2. Valid Driver’s License – Must be maintained during employment period
3. State criminal background check and Federal (if applicable), as required for regulated areas.

PREFERRED QUALIFICATIONS:
EDUCATION, CERTIFICATION, AND/OR LICENSURE:

1.  Formal training beyond high school (i.e., technical school, apprenticeship, or college)

EXPERIENCE:

1. Two (2) year experience in building maintenance

CORE DUTIES AND RESPONSIBILITIES: The statements described here are intended to describe the general nature of work being performed by people assigned to this position.  They are not intended to be constructed as an all-inclusive list of all responsibilities and duties. Other duties may be assigned.

1. Demonstrates thorough knowledge, repair, inspection, and use of hand tools and power tools commonly used in building maintenance and plant repairs.
2. Demonstrates thorough knowledge, repair, use, and the instruction in the use of measuring devices such as rulers, calipers, dividers, micrometers, gauges, etc.
3. Demonstrates ability to effectively use and instruct in the proper use of test equipment required for building repairs and maintenance (i.e. Volt/Ohm Meter, electronic receptacle analyzer, safety testing equipment, infrared devices, etc.).
4. Demonstrates thorough knowledge of repair procedures and practices related to carpentry, plumbing devices, electrical work, lock cylinders, painting, door hardware, drain blockage, and general building and machine repairs as monitored by managers and team leaders.
5. Demonstrates basic knowledge and proper compliance procedures of Plant Safety Practices (i.e. OSHA, NFPA 99, NEC, Hazardous Communication, Infectious Control, and JCAHO standards.
6. Demonstrates thorough knowledge of AC and DC voltage equipment and systems (i.e. compressors, refrigerants, evaporators, recovery units, etc.) as well as regulatory restrictions and proper safe work practices.
7. Demonstrates knowledge and understanding of refrigeration equipment and systems (i.e. compressors, refrigerants, evaporators, recovery units, etc.) as well as regulatory restrictions and proper safe work practices.
8. Demonstrates knowledge and ability to perform and explain a wide variety of welding procedures (i.e. electrodes types and sizes, wire feed application, brazing technique, etc.).
9. Maintains documentation of services provided through time sheets, work orders, inventory sign-out sheets, and all regulatory compliance forms.
10. Performs cost effective repairs by evaluating the options available, considering total cost of repairs, and taking action appropriately.
11. Demonstrates knowledge of the operation and maintenance of the plumbing system (i.e. main valves, zone shut-off valves one-line diagrams, hot and cold domestic loops, and etc.).
12. Demonstrates knowledge of the operation and maintenance and repair of the nurse-call system (i.e. master stations, patient stations, pillow speakers, and etc.).
13. Demonstrates knowledge of the operation and maintenance of electrical distribution system (i.e. main switch-gear and sub-stations, transfer switches, one-line diagram, panel identification, and etc.).
14. Demonstrates knowledge of the operation and maintenance, repairs, and inspection of the patient care equipment.
15. Demonstrates a knowledge pertaining to the operation and maintenance of the pneumatic tube system (i.e. air handler units, t-stat calibration, air filtration, etc.).
16. Assures the technical competence in the Facilities Engineering field by attending in-services, reading trade literature, and schools.
17. Completes specific TPC training courses, as documented on training records. Participates in on‑the‑job training and attends all departmental in-service sessions.
18. Provides on-the-job training for lower level technicians in regards to systems, policies and procedures, safety precautions, and proper working practices.
19. Performs cost effective repairs by cost effective and efficient manner by evaluating the options available, considering total cost of repairs, and taking action appropriately.
20. Demonstrates knowledge of the Hospital’s cost reduction goals and promote ways to achieve cost saving recommendations in the Facilities Engineering department.

PHYSICAL REQUIREMENTS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
 

1. Must have the physical capability to stand, walk, reach, climb, ascend/descend stairs and ladders, for a maximum of six (6) to eight (8) hours.
2. Must have the physical capability to lift and/or carry 1‑15 pounds for a maximum of six (6) to eight (8) hours and 15 to 60+ pounds for a maximum of two (2) hours.
3. Must have the physical capability to push and/or pull 1‑15 pounds for a maximum of six (6) to eight (8) hours and 15 to 90+ pounds for a maximum of two (2) hours.

WORKING ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

1. Uses proper precautions in the performance of duties in which the following exposures may occur:  temperatures above 100~F and/or below 45~F for sustained periods; heights above 6 feet, i.e., ladders, scaffolding, etc.: vibrations; skin and/or lung irritants such as solvents, paints, lubricants, etc.
2. Appropriate dress for above-mentioned exposures is required.
3. Use of Safety equipment is required.
4. Use of protective wear, such as goggles, gloves, boots, masks, etc., is required.
5. Corrects and reports any equipment related conditions which may compromise patient or staff safety and efficiency.
6. Respond to trouble calls through the Facilities Engineering dispatcher and routine work orders.
7. Must complete vision screening test for near and far vision. Must screen 20/40 or better or will be referred to the Eye Center.

SKILLS AND ABILITIES:
 

1. Exhibits knowledge of the computer maintenance management program for tracking history used in the performance management process.

Additional Job Description:

Scheduled Weekly Hours:

40

Shift:

Day (United States of America)

Exempt/Non-Exempt:

United States of America (Non-Exempt)

Company:

BARNS Barnesville Hospital

Cost Center:

624 BARNS Facilities Management

Address:

951 East Market StreetCadizOhio

Equal Opportunity Employer

West Virginia University Health System and its subsidiaries (collectively "WVUHS") is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. WVUHS strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons because of race, color, religion, creed, national origin or ancestry, ethnicity, sex (including gender, pregnancy, sexual orientation, and gender identity), age, physical or mental disability, citizenship, past, current, or prospective service in the uniformed services, genetic information, or any other characteristic protected under applicable federal, state, or local law. All WVUHS employees, other workers, and representatives are prohibited from engaging in unlawful discrimination. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, training, promotion, discipline, compensation, benefits, and termination of employment.