Robert Bosch Venture Capital

Venture capital funding deep tech startups

Hardware Engineer

Board & Electronics DesignConfirmed live in the last 24 hours

Full-timeShanghai, ChinaNo salary listedIn-person

About the Job

Requirements

A master's degree in electronics or automation-related fields is required.
Experience independently responsible for hardware project development is required.
Proficiency in digital circuits, analog circuits, and circuit analysis is required.
A bachelor's degree or above in electronics engineering, microelectronics, automation, or another electronics-related major is required.
At least five years of automotive electronics hardware development experience is required.
Experience on a mass-production ADAS domain controller or cockpit domain controller project is required.
Expertise in automotive-grade hardware schematic design and proficiency with Cadence Allegro or OrCAD are required.
Expertise in high-speed PCB design review and knowledge of SI/PI simulation, impedance control, thermal design, EMC design, and board-level reliability evaluation are required.
Familiarity with multilayer HDI PCBs and second-order board processes is required.
Familiarity with automotive interfaces including automotive Ethernet, GMSL, MIPI, PCIe, CAN, and LIN is required.
Familiarity with automotive power supplies, power sequencing, load switches, and protection circuits is required.
Knowledge of ISO 26262 functional safety, hardware FMEA, DVP&R, and the ASPICE development process is required.
Ability to independently perform hardware testing and failure localization, with experience troubleshooting hardware issues during vehicle road tests, is required.
Good spoken and written English is required.

Responsibilities

Coordinate with systems, customers, and software teams to decompose ADAS and cockpit domain-controller hardware requirements.
Complete hardware architecture evaluation, power architecture design, core-component selection, cost evaluation, and competitor-solution analysis.
Independently design schematics.
Guide and review PCB layout, and plan stack-ups, impedance, and power partitioning.
Ensure signal- and power-integrity simulation and implementation for high-speed interfaces including DDR, PCIe, automotive Ethernet, GMSL, and MIPI.
Evaluate board-level reliability, thermal design, and design for manufacturability.
Perform board bring-up and test power-on sequencing, power rails, clocks, and high-speed signals.
Develop hardware test specifications and support hardware functional, environmental-reliability, and EMC/EMI testing.
Troubleshoot system hangs, resets, DDR stability, electrostatic-discharge issues, and failures at high and low temperatures, and deliver corrective solutions.

Desired Qualifications

Hands-on experience with Qualcomm SoC design is preferred.

职位描述

需求与方案设计 对接系统、客户、软件团队，拆解 ADAS / 座舱域控硬件需求，完成硬件架构评估、电源架构设计、核心器件选型、成本评估、竞品方案分析。
原理图与 PCB 设计评审 独立完成原理图设计；指导、评审 PCB Layout，规划叠层、阻抗、电源分割；重点保障 DDR、PCIe、车载以太网、GMSL、MIPI等高速接口 SI/PI 仿真与落地；评估板级可靠性 BLR、热设计、可制造性 DFM。
硬件调试与验证 单板 Bring-up、上电时序、电源轨、时钟、高速信号测试；制定硬件测试规范，支持硬件功能、环境可靠性（温循、振动、HALT）、EMC/EMI 测试；定位死机、复位、DDR 稳定性、静电、高低温失效等问题，输出整改方案。

职位要求

Master’s degree in electronics or automation relevant fields
Experience in independently responsible for hardware project development
Proficient in basic knowledge such as digital circuits, analog circuits, and circuit analysis
Hands-on experience with Qualcomm SOC design is preferred
Good English speaking and writing

其他信息

本科及以上，电子工程、微电子、自动化等电子相关专业。
5年及以上汽车电子硬件开发经验，必须有 ADAS 域控 / 座舱域控量产项目经验。
精通车规硬件原理图设计，熟练使用 Cadence Allegro/OrCAD。
精通高速 PCB 设计评审，掌握 SI/PI 仿真、阻抗控制、热设计、EMC 设计，熟悉板级可靠性 BLR 评估；熟悉多层 HDI PCB、二阶板工艺。
熟悉车载接口：车载以太网、GMSL、MIPI、PCIe、CAN/LIN；熟悉车载电源、电源时序、负载开关、保护电路。
了解 ISO26262 功能安全、硬件 FMEA、DVP&R、ASPICE 开发流程。
能独立完成硬件测试、失效定位，具备整车路试硬件问题排查经验。

About the Company

Robert Bosch Venture Capital

Venture capital funding deep tech startups

RBVC (Robert Bosch Venture Capital) is a global venture capital firm that backs early-stage deep tech startups in areas like energy efficiency, medical devices, and virtual/augmented reality. It supports companies with funding and access to Bosch’s network and resources to help them scale and bring innovations to market. Unlike traditional VCs, RBVC may purchase solutions for a proof-of-concept while allowing startups to keep their intellectual property, which speeds up development and lowers upfront costs. The firm earns money through equity investments and the eventual success of its portfolio. RBVC’s goal is to accelerate technological advances across multiple industries by connecting startups with Bosch’s ecosystem, customers (from medical centers to data centers), and global reach.

Company size: 201-500
Company stage: Not listed
Total funding: $3.8B
Headquarters: Frankfurt, Germany
Founded: 2007

Recently Posted Jobs

Explore more opportunities at Robert Bosch Venture Capital

See more jobs