9

9 Mothers

AI-powered counter-UAS defense systems

Senior Optomechanical Engineer

Design EngineeringConfirmed live in the last 24 hours
Full-timeAustin, TX, USA

About the Job

Requirements

  • At least 10 years of optomechanical engineering experience, including optical assemblies the candidate designed that shipped and held up in the field, ideally in harsh environments.
  • Deep hands-on expertise in kinematic and exact-constraint mounting, including designing flexures, three-point and semi-kinematic mounts, bonded cells, and retaining-ring mounts, and the ability to explain mount degrees of freedom and lessons learned.
  • Strong materials judgment for thermal stability versus cost, including CTE matching, athermalization of focus and boresight, adhesives and bond-line design, and cost and lead-time differences between aluminum, stainless steel, titanium, Invar, and composites.
  • Practical shock and vibration experience, including modal analysis, random vibration and shock response, isolation, preload design, and verification methods such as MIL-STD-810 or equivalent.
  • Experience designing sealed optical housings, including O-ring and gasket design, dry nitrogen purge, desiccants, pressure equalization, window selection and mounting, and contamination control during assembly.
  • Fluency with optical tolerances and error budgets, ability to read lens prescriptions and drawings, identify consequential tolerances, and translate image-quality and boresight requirements into mechanical requirements.
  • Proficiency in finite element analysis (FEA), including modal, structural, and thermal analysis, and judgment to evaluate model accuracy.
  • Strong geometric dimensioning and tolerancing (GD&T) and drawing skills sufficient to fully define optical assemblies for suppliers.
  • Hands-on alignment and test skills using autocollimators, collimators, alignment telescopes, interferometry or modulation transfer function (MTF) benches, and custom fixtures as needed.
  • A bachelor's degree in mechanical engineering, optical engineering, or physics, or equivalent experience.

Responsibilities

  • Own each platform sensor head, camera module, and optical window from concept and requirements through production and field support, including the optomechanical error budget, drawings, interface control documents (ICDs), and test procedures.
  • Design kinematic, semi-kinematic, flexure, bonded, and retained mounts for lenses, windows, mirrors, filters, and focal-plane assemblies; control preload, bond-line thickness, and stress birefringence to maintain alignment.
  • Select housing, cell, spacer, and fastener materials based on coefficient of thermal expansion (CTE) match, stiffness, mass, machinability, corrosion, and cost; calculate focus and boresight athermalization and quantify cost-versus-stability tradeoffs.
  • Design for weapon recoil, gunfire shock, and gimbal slew loads; move structural modes away from excitation, specify or design isolation where useful, maintain line-of-sight jitter and boresight shift within budget, and run and correlate modal and structural FEA with testing.
  • Design sealed, purged, and desiccated housings that protect optics from moisture, dust, and contaminants; specify seals, breathers, purge and fill procedures, window coatings, anti-fog and window-clearing approaches, and technicians’ clean assembly and handling procedures.
  • Develop alignment and co-boresighting methods and fixtures for multiple sensors on a common mount and to the weapon, making alignment repeatable in production.
  • Translate lens prescriptions into buildable assemblies, provide early feedback on tolerance sensitivities and mechanical constraints, and support integrated structural-thermal-optical (STOP) analysis where useful.
  • Plan and run thermal cycling, vibration, shock, humidity, and water-ingress tests on optical assemblies; measure changes in focus, boresight, and image quality and incorporate findings into revisions.
  • Work with the machine shop and suppliers on tolerances, surface finishes, and process capability; qualify optics, coating, and window vendors; and write assembly and inspection procedures for repeatable production.
  • Visit the range, observe sensors under fire, and bring field-test learnings back to the team.

Desired Qualifications

  • Experience with weapon-mounted or gunfire-exposed optics, such as fire-control sensors, weapon sights, remote weapon stations, or gimbaled electro-optical/infrared (EO/IR) turrets.
  • Experience with infrared optics and windows, including germanium, zinc sulfide, zinc selenide, chalcogenides, or sapphire, and their mounting, coating, and thermal characteristics; experience integrating uncooled thermal cores.
  • Experience with laser rangefinders or other active optical systems, including transmit/receive boresight.
  • STOP analysis experience using tools such as Zemax OpticStudio, Code V, or SigFit.
  • Experience with gimbal and stabilized-platform design where structural stiffness and line-of-sight stability drive architecture.
  • Experience taking optical assemblies from prototype to rate production, including vendor qualification and production alignment fixtures.
  • Interest in firearms and the engineering problems they create for mounted equipment.
  • Experience in a venture-backed hardware startup.

About the Company

9 Mothers

AI-powered counter-UAS defense systems

Preparing company summary for 9 Mothers based on provided description.

Company size
11-50
Company stage
Seed
Total funding
$130K
Headquarters
Austin, TX
Founded
2024

Recently Posted Jobs

Explore more opportunities at 9 Mothers

See more jobs